Cordless irons: pros and cons. How does a cordless iron work? – Setafi

Understanding how a cordless iron works is easy. This is a device with a stand that has a heating element and transfers heat to the sole. The ironing process is faster and safer because there is no cord - you can work with either hand. The pros and cons, as well as the principle of operation of this device are described in detail in the presented article.

Features and principle of operation

The tool outwardly differs little from the usual one, but it is an iron without a cord. In addition, it is placed on a stand, which also serves as a charging station. It is connected to the network and contains a heating element. It warms up and transfers heat to the sole on contact.

Since one ironing cycle, i.e. continuous work, takes about 20-25 seconds (sometimes less), the sole does not have time to cool down. Therefore, a Philips iron without a wire or another model also remains hot. This power is enough for a full ironing.

The stand follows the contour of the iron. It has a special connector in which it is convenient to install the tool. Thanks to this, as well as the absence of a cord, the process is much more convenient - there is no risk of getting tangled in the wire and, moreover, dropping the device.

The stand is equipped with an indicator that turns on when the desired temperature is reached. It is also equipped with a thermostat, with which you can set the desired level. Some modern models even have a sound signal and an automatic shutdown system for safety reasons.

Advantages and disadvantages of the device

Cordless irons have pros and cons. Obviously, due to the absence of a cord, the ironing process becomes not only more comfortable, but also safer. There are also other benefits:

• the process goes faster, you can focus only on ironing;
• economical consumption of electricity;
• the surface of the iron does not heat up too much unnecessarily;
• even a large amount of clothing can be processed - if one hand is tired, the other works;
• it is possible to set the desired temperature and adjust the ironing program;
• The principle of operation of a wireless iron is the same as that of classic devices, so you can figure out the instructions in a matter of minutes.

There are not so many cons, but nevertheless they are also there:

• during ironing, the device is placed only on a stand - it will not be possible to install it vertically (although for some models, on the contrary, the installation is only vertical, but not horizontal);
• such a device costs, as a rule, more expensive than conventional models;
• there is a time limit for continuous ironing (without recharging);
• it is intuitively clear how to use a cordless iron, but its functionality is limited compared to other modern models.

Instructions and tips for use

Usage rules vary by device. But there are also common points - they look like this:

1. The stand is connected to the network.
2. Set the desired temperature and mode (program).
3. Put the iron into it exactly in the connectors.
4. Wait for a sound or light signal that the desired temperature has been reached.
5. Start ironing. During the processing of the fabric, the non-contact iron is used for 15-25 seconds, then put back on the stand.
6. The same cycles are repeated several times until the process is completed.

It is also recommended to pay attention to a few tips for the correct use of the device. With experience, a skill will appear, but if you use a wireless iron for the first time, you should follow these rules:

1. It is better to start work with denser fabrics that require high temperature, and finish with delicate ones.
2. If the fabrics are mixed, it is worth choosing a mode with a low temperature.
3. When changing the temperature mode, you need to put the instrument on the stand and wait a few seconds.
4. Before use, adjust the steam function.
5. Once every few months, descaling is carried out with citric acid or other means.

The cordless iron is more convenient and safer. This is especially important if there are small children or pets in the house. But these devices cost a little more. They are chosen in the same way as a regular iron - taking into account technical characteristics, warranty period and reviews.