Which built-in refrigerator is better to choose? Selection by parameters - Setafi

There are several parameters that allow you to understand how to choose a built-in refrigerator. Pay attention to the dimensions, variety, energy efficiency class and appearance. These and other criteria are described in detail in the article.

Types of embedded models

If you carefully consider which built-in refrigerator is better to choose, you need to understand the types of these devices. Unlike conventional units, such refrigerators are divided into 2 large classes:

1. Built-in completely - that is, the camera does not have a front panel as such. Its door is attached to the inner surface of the cabinet door. Thanks to this, the device fits perfectly into the design and looks quite attractive.
2. Partially built-in - also installed in a niche, but it is not closed by the cabinet door. Arguing which built-in refrigerator to choose, you can dwell on this option. Usually it will cost less, but it does not look so beautiful.

In turn, models that are fully embedded are divided into 2 more groups:

1. With skids - when opened, the door slides sideways on specially installed rails. Then you can open no more than 90 degrees.
2. With hinges - the door is hinged to the cabinet itself. You can also plow at a larger angle than 90 degrees, so this design is more convenient.

A very important parameter that helps to understand how to choose a built-in refrigerator is the number of built-in cameras. There are 3 categories:

1. Single-door devices - only the refrigeration compartment. Suitable for drinks and food stored for only a few days. The freezer can also be, it has a separate inner door. At the same time, the volume is small - within 30 liters. Although sometimes there is no freezer - it will have to be bought and installed separately.
2. Combi - with 2 or more cameras. This is the most popular option, so the choice of built-in refrigerator often falls into this category. Such devices have a separate refrigerator and freezer. It is noticeably larger - usually 2-3 boxes, and is located at the bottom.
3. Side-by-side is a rare type. In this case, the compartments are located on the left and right (in the usual case, the freezer goes from above or below). The capacity is maximum, but the cost is high. The choice of a built-in refrigerator in this category is much less common. In addition, the dimensions of the device are very large.

Dimensions and volume

Having studied the types of built-in refrigerators, you can begin to consider such an important parameter as volume and dimensions. As a rule, the aggregates reach only 50-56 cm in width. At the same time, their depth is in the range of 50-55 cm. There are also more spacious varieties, they are more expensive and require an individual order of furniture.

In the standard case, the refrigerator cabinet has a parameter of 55 cm deep and 60 cm wide. Thanks to this, most devices will optimally fit into the parameters without additional expansion or contraction work.

When choosing, it is worth considering the features of the built-in refrigerator. You also need to take into account that there is a gap of 4-5 cm between the wall of the cabinet and the installation itself. If after the cabinet there is a tile or an oven, the minimum interval is 7 cm.

As for the height, this parameter can vary greatly. The larger the parameter, the more spacious the chamber. But at the same time, it is necessary to limit yourself to a reasonable framework, taking into account your real needs and growth:

1. If a large chamber is not needed, the number of products is minimal, there is little space - models with a height of 120 cm are suitable.
2. It is clear which built-in refrigerator to choose if there are children, the elderly. It is better to purchase a unit with a height in the range of 120-160 cm.
3. The most popular parameter is within 160-180 cm.
4. If you need a large volume, you need to consider cameras with a height of 180 cm or more.

energy efficiency

Another way to choose a built-in refrigerator for your home is related to energy efficiency. It is very easy to analyze it - you need to look at the marking in the data sheet or on the sticker. The class is denoted by a letter from A to G. The most effective are A+++, A++ and A+.

Further there are similar designations with the letter B and in the same way up to G. For home use, it is quite possible to consider the first 2 classes, that is, A and B. It is worth remembering that each plus reduces energy consumption by 8-10%.

Defrost system

The selection of a built-in refrigerator is also carried out taking into account the defrosting system. There are 3 main options:

1. Manual defrosting is the simplest and most inexpensive model. They require weekly defrosting, while the process itself is quite laborious.
2. Drip defrosting - in this case, the frost gives drops that drain and fall into a separate container.
3. No Frost - ice forms behind the wall of the chamber and then melts thanks to a running fan. Everything happens automatically, labor costs are minimal. On the other hand, the air in the chamber is quite dry, and the products quickly lose moisture.

There are other options for the built-in refrigerator, for example, the control panel. It can be traditionally mechanical and electronic. When choosing, it is worth considering the aesthetic moment - how well the camera will fit into the interior. If you take into account all the described criteria, the purchase will definitely be successful.