Vestel washing machine: malfunctions, do-it-yourself step-by-step repairs with a photo - Setafi

Some malfunctions of the Vestel washing machine can be repaired with your own hands. For example, if you have the skills, you can tighten the belt, change it or install a new heating element. However, for this you need to know the exact reason, taking into account which code appeared on the display or which indicators began to flash. A detailed description of the main codes and the procedure for different cases is presented in this article.

Basic error codes

If the Vestel washing machine gives error E01 or another message, you need to know exactly the decoding. The main codes look like this:

1. E01 - indicates that the door is open or not tightly closed. Appears at the very beginning of washing - literally a few seconds after starting the program. It is necessary to check the mechanism that blocks the hatch.
2. E02 - unlike the first case, this error can also occur during the process, and the washing will continue. It is associated with improper filling of the tank (more water is poured than required). Similar Westel error codes appear in case of low water pressure - you need to check if the water supply is working properly. It may also turn out that the hose that fills the water, or the electric valves, is clogged.
   instagram viewer
3. If the “Ende” sign lights up during washing, such errors in the Vestel washing machine will cause the wash to stop. Then the water will be drained, and the spin cycle will run at a low speed (no more than 400 rpm). After the interrupted cycle, E03 will appear. It is necessary to check the drain hose or filter, if necessary, clean them.
4. If the E04 code appears, the wash will be interrupted, and the drain pump will start to work, which drains the water. After a few minutes, it turns off and starts working again. The reason is related to the incorrect operation of the electric water supply valve (it stops in the open position). Sometimes during washing, the pressure in the water supply increases sharply. There is also a completely harmless reason when the washing started with the water tap closed - it must be opened to the fullest.
5. If the Vestel 01 error appears at the very beginning of the washing process, then the E05 code can be displayed at any time. It means that there is no water in the plumbing. If it is, this indicates a malfunction of the sensor that controls the fluid level. Also, problems may be associated with the electronic module.
6. There are other CMA Vestel error codes, for example, E06. It warns of a malfunction of the drain pump or a sensor that controls the liquid level.
7. If the message "E07" appears, it means that a water leak has occurred or the float sensor has broken.
8. E08 indicates failures in the electrical network, as well as voltage drops.
9. E09 - the control module has broken, this is one of the most serious problems. You will need to repair the contacts or completely replace the board with the processor. In extreme cases, the unit will simply stop turning on or there will be program failures and freezes.
10.  There are also error codes for the Vestel washing machine, which are designated E10. They talk about a malfunction of the engine or generator that measures the speed of the engine. Perhaps there is no contact - then you need to inspect the internal components and make repairs.

You can determine the error codes of Vestel washing machines without a display. For example, in the case of E02, 2 indicators are lit - 1 and 3. If it is necessary to report E03, lights 1 and 4 are lit. If the 2nd and 3rd lamp flashes, this indicates E04. It also happens that it is necessary to report the error Vestel E01. Then the first and second indicators light up.

The most common faults

Most often, for different Vestel models, the following parts fail:

1. Bearings that provide a smooth running of the drum. Because of this, the seal also wears out and loses its tightness. Outwardly, this can be determined by unusual noises, for example, cod, rumble or rattle.
2. Ten - then the water does not heat up, and the error codes issued by Vestel WM 8341 may be different. A possible reason is severe overheating, the formation of scale and other deposits. The heating element needs to be cleaned or replaced, for which you will have to remove the panel from below.
3. The control module has broken down - because of this, a variety of failures occur, the machine freezes and may not turn on at all. The possibility of self-repair is unlikely - it is better to contact an experienced craftsman, because the breakdown is quite serious.
4. The motor brushes wear out - they gradually wear out from constant contact with the motor collector. Therefore, the rotation of the drum is carried out at a lower speed, the linen is stretched worse and remains rather damp.
5. Also, Vestel errors can lead to a broken or stretched belt that connects the engine to the drum. If it is badly worn, it needs to be replaced.

Some of the problems described can be fixed by yourself. For example, a heating element can be cleaned with a solution of citric acid or completely replaced with a new one, having carefully studied the location of the wires (it is recommended to take a photo first). But there are more serious breakdowns, when do-it-yourself repairs not only do not help, but also harm. In such cases, it is recommended to contact a qualified specialist.