Which is better to buy a dremel: rating of mini drills, review of models - Setafi

Drill, engraver, mini-drill, Dremel - as soon as this multifunctional tool is not called. With it, you can easily and quickly cut small parts, sharpen, engrave, polish and make various cuts and curly recesses. In our article, we will briefly describe what exactly a mini-drill is for, what points you should focus on when choosing a device, and also present our small top models.

The principle of operation and design of the best dremel

The device works surprisingly simply: an electronic motor drives a shaft on which a small cartridge is mounted. The necessary working nozzle is attached to the clamp itself. The power of the device is relatively small - as in drills or rotary hammers, you will not find high speed and shock mode.

The engraver has a commutator motor on carbon brushes (they need to be replaced from time to time as they wear out). Both all nozzles for a drill, and small drills from drills and screwdrivers (no more than 6 mm) are clamped in the cartridge. Since the device is used for fine work, it is necessary to constantly adjust the movement of the shaft - for this, a speed control button is installed.

Areas of use for a powerful dremel

Here are some examples of work that can be done both at home and in workshop mode:

1. Wood processing. You can clean the edges, cut grooves and recesses, make notches.
2. Cutting small structures (wire, nails, etc.).
3. Engraving work on various stones.
4. Creation of inscriptions and patterns on a glass surface.
5. Sharpening of small tools, final cleaning.
6. Processing of thick leather and leatherette.

And this is not a complete list. Now you are sure that the best engraving machine is an indispensable and multifaceted device that helps with small jobs. Do not forget that the machine is not designed for heavy loads - it will not take concrete and thick metal. Also, some types of sharpening (for example, laser sharpening) significantly outperform a dremel.

Which mini drill to choose for the home: basic options

Power type

How to choose a mini drill according to the power method? It all depends on where and what types of work you will be doing. For your workshop, where the work of a drill will take at least 1-2 hours, feel free to take a network device. The cord should be thick and strong, preferably long.

Also, a network engraver is taken if more power is needed for a relatively small price (battery devices with the same power will cost several times more).

Nozzle set

You will have to pay extra for each accessory if it is not included. We recommend that you stop choosing a dremel on a model that has several, or even a set of add-ons at once. The more of them, the better. Some devices come with more than 100 accessories at once!

Let's look at an example why the quantity in the set prevails. For example, to cut just one profile per 1 mm, about 2-4 cutting wheels of a cheap format are required, while the original nozzle will need only one. The situation is similar with other add-ons - it is better to overpay now than to pay even more later.

Quick clamping and brush replacement

The choice of a dremel also depends on the speed of maintenance of the equipment. Some devices can replace the nozzle in a keyless version - just press the button and the nozzle falls out. The option saves you a lot of time, but it is available in a small number of engravers.

Replacing the brushes is equally important. Although they need to be changed very rarely, you still don’t want to disassemble the entire device, so that later you don’t unknowingly assemble it again. Please note that most engravers come with an extra pair of carbon brushes - you already have some stock.

Soft start system

Which dremel is better? - one that has a smooth start. The function limits the input electric current so that the device starts at a low speed and gains power evenly. A smooth start also prevents a possible situation when the engraver was launched at maximum speed from the start - and it slipped out of hand. Although, we note that due to the small weight of the drill, even without this option it is unlikely to go anywhere from the master.

Power stabilization

Such a system delays a certain number of revolutions, which are necessary for successful processing the part, no matter how powerfully you set the indicator further - everything is held on one level. So the dremel does not lose its power during the entire processing process, economically and evenly distributes the electric current. Especially in this area, battery models have proven themselves.

Why do I need a start button lock

In drills, this option is needed even more than a smooth descent. The mechanism blocks the mechanical button in the running mode, when the amount of work is large enough, and holding the key for a long time is inconvenient and tiring. It is especially important for engraving work on hard surfaces (stone, metal, glass, etc.) - here you can not do without setting.

Dremel rating for home and workshop: the best corded and cordless models

Since there are fans of both network equipment and battery-powered devices, we have selected several drills that will satisfy the needs of both categories. Pay attention to these mini-drills:

The best mains-operated engravers:

• HAMMER MD050B
• DIOLD MED-1 MF
• DREMEL 4000-4/65
• Elitech ПШМ 170ЭЖК
• Bison ZG-130EK

Top battery cars:

• Hammer AMD 3.6
• Bosch GRO 10.8 V-LI Professional
• BOSCH GRO 12V-35
• Ultratech Cordless Precision
• Dremel 8200 (8200-1/35)

And what dremel have you already looked after or have been using it for a long time? Share its pros and cons with other readers!