Learning how to start the dishwasher for the first time. First load dishwasher - Setafi

click fraud protection

Understanding the instructions on how to start the dishwasher for the first time is quite simple. The basic rule is that the first cycle should go idle, with maximum heating and maximum duration. After that, you can start the first wash. Each process is described step by step in the presented article.

The content of the article

  • Test run
  • First wash
  • How to know when a wash is complete
  • Possible problems

Test run

It’s not worth putting dishes into the unit right away - many manufacturers, for example, Bosch, write in the instructions that the first start-up of the dishwasher is best done idle. The reason is related to the contamination of the inner surfaces of the camera with dust, grease from the factory and other particles.

The first start of the dishwasher allows you to solve several problems at once:

  • complete cleaning of the chamber from dust particles and grease;
  • checking the heater and temperature settings;
  • removal of residual odors;
  • you can quickly master the functionality of the device (programs, temperature conditions, load level);
  • instagram viewer
  • also the first inclusion of the dishwasher allows you to make sure that the installation to the water and sewer pipes is correct.
Using the dishwasher for the first time

It is not difficult to understand how to start a dishwasher from Bosch or other manufacturers for the first time. After connecting to the network, you must remove all stickers and packaging, and then proceed as follows:

  1. Make sure that the atomizer rotates correctly - for this it is enough to twist it by hand.
  2. Remove the filter and check that it is intact, undamaged.
  3. Find a container next to it, in which they put special salt. Next, open the lid, pour water and put the product (for example, "Splash" or "SYNERGETIC").Find capacity
  4. The first start of the dishwasher also involves the correct setting of the regulator, which controls the hardness of the water. If the water in a particular area is very hard, set the maximum value. If the stiffness is medium - medium, etc. It is worth remembering that the greatest rigidity is observed in Moscow and in almost all regions of Central Russia.
  5. Now you need to put the detergent in the appropriate tray. It can be 1 tablet or gel, the amount of which is indicated in the description of the drug. You can find the dispenser on the inside of the door.Put detergent
  6. Next, on the control panel, find the desired button and indicate which type of detergent is selected.
  7. The next step in the instructions on how to turn on the dishwasher for the first time is to select a program. For a test run, the longest mode is suitable.
  8. Set the temperature limit, and then start the process with the start button.

If you follow the rules described, the first launch of the Indesit dishwasher or another model will be successful. However, it is recommended to follow how the device draws water, whether the heating is fast, whether the waste liquid is completely drained at the end of the process.

At the same time, special salt, as well as rinsing liquid, can be added in any quantity - the excess will go to the next cycle. But the detergent itself should be put only in a single amount, which is used up at a time.

First wash

If the test run is OK, you can start 1 start of the dishwasher. To do this, load plates and other items in baskets. Moreover, it is desirable to ensure uniform loading - for example, fill the basket on the right and left half.

Here is what you need to do to start the dishwasher for the first time:

  1. Clean all utensils of food residues.
  2. Place bulky items, such as a frying pan, in the bottom tray. You need to put it so that there is no contact with the holes of the atomizers.
  3. All plates are placed in the container in the middle. In order for the first start of the Bosch dishwasher to go smoothly, it is better to place them as freely as possible, without contact.
  4. Place forks, knives and other small items in the top tray. If necessary, adjust the height of the pallets - many modern devices have this option.
  5. Next, a liquid detergent or tablet is added to the dispenser and the lid is closed.
  6. The first start-up of the Bosch dishwasher, as well as subsequent ones, is associated with the need to select the appropriate mode and indicate the temperature level. After that, start the process with the start button.

How to know when a wash is complete

When the cycle ends, the device will beep. Many models also have a beam on the floor. This is the name of the indicator that shines on the floor right in front of the door. During washing, the red light is on.

How to know when a wash is complete

At the end of the process - green.

How to find out about completion

When the Bosch dishwasher is started for the first time, a display projection may appear on the floor instead of a beam. It shows the time remaining until the end of the wash. The same image can be seen each time the unit is used.

A projection display may appear on the floor

After the first start of the Siemens dishwasher or another model is completed, it is recommended to check the quality of washing. It can be assessed in several ways:

  • perfect cleanliness;
  • shine;
  • no foreign odors.

Possible problems

While learning how to use the dishwasher for the first time, you can also use the drying option. If it worked correctly, the plates will be completely dry, without streaks on the surface. If the quality is not up to par, the reason is not necessarily related to the device itself.

Dishwasher

In fact, the first use of the dishwasher may not be entirely correct, so it is recommended to pay attention to a few points:

  1. If the first start-up of the dishwasher technically went well, but stains are noticeable on the dishes, it is possible that the plates were too close to each other, there were food residues on them.
  2. Another mistake is the wrong choice of rinse aid, due to which the surface of the plates became cloudy.
  3. If a strong foreign smell is noticeable, then you need to replace the detergent or put it in small quantities.

Now it’s clear how to start the Siemens dishwasher or other models for the first time. This is a fairly simple, but at the same time an important procedure that will help clean the chamber and deal with the device of the unit. When the first load of the dishwasher is over, you need to carefully inspect the plates. If necessary, replace the rinse aid or other agents.

Tonometer is a diagnostic device for measuring blood pressure – Setafi

Tonometer is a diagnostic device for measuring blood pressure – SetafiHomeUncategorized

shop.av.zp.uaBlood pressure is the level of blood pressure in the vessels. It is extremely necessary to constantly measure it for athletes, hypertensive patients, core patients and other categories...

Read More
Which washing machine is better - Samsung or LG? Comparative review of leading manufacturers - Setafi

Which washing machine is better - Samsung or LG? Comparative review of leading manufacturers - SetafiHomeAppliancesWashing Machine

When buying household appliances, many users ask themselves the question: which washing machine is better than Samsung or LG. On the one hand, these are two well-established brands from South Korea...

Read More
Standalone hidden camera: how it works, installation rules and types - Setafi

Standalone hidden camera: how it works, installation rules and types - SetafiHomeElectronics

Hidden video filming is carried out with special cameras of small sizes. However, even they can be spotted if the site is chosen incorrectly. How to do this, as well as how hidden video cameras wor...

Read More
Instagram story viewer