Why the chain on a chainsaw quickly becomes dull, what to do

Many owners of suburban areas, among other tools, have chainsaw. It allows you to deal with various tasks quickly and efficiently. It must be used correctly, in compliance with safety regulations. If the efficiency of the equipment has decreased, the problem may be a dull chain. Let's figure out why this happens and how to fix it.

Reasons why the chainsaw chain becomes blunt

There are several factors that can affect the sharpness of teeth. The part cannot remain unblunted for a long time. With regular, intensive use of the tool, the teeth will naturally become less sharp.

Also, the reasons may be the following:

1. Priming. Accidental contact with soil on the equipment will lead to deterioration of its operation. The quality will drop noticeably.
2. The chain tension has been set incorrectly.
3. Use of poor quality oil that does not provide proper lubrication. It is not recommended to use mining for these purposes.
instagram viewer
4. The type of material being processed. The sharpness of the element is directly affected by the type of wood with which they work. The harder it is, the closer the time when sharpening is required.
5. Getting under the cutting parts of foreign elements, including plastic, metal objects, glass, stone, etc.
6. It was noted that regular and intensive use brings the need for sharpening closer. But it is worth noting that the work of the tool without interruption also does not benefit him. Every 2 hours it is necessary to stop the equipment for at least 20 minutes.

It is recommended to lubricate the chain with oil before starting work. This will help keep the sharpness longer.

If you find the first signs that the part is blunt, you must immediately start sharpening. Otherwise, the situation will only get worse.

How to tell if chain teeth are dull

You can determine that the teeth have lost their former sharpness even at the initial stage of the problem. It is enough to pay attention to several important factors. Among them:

1. Increased physical activity during standard work.
2. Sagging, chain stretching.
3. When cutting, a strong vibration is felt, the tool starts to slow down.
4. The sawdust changed its appearance after sawing, became small, the work ceased to be accurate. Irregularities appeared, the edges became too sharp.

Experts say that well-sharpened teeth are much more important than the power of the tool. Without this, a model with any performance will not perform well.

Why you can not saw if the teeth are dull

Some ignore dull teeth and continue to work with such a tool. This error can lead to additional problems. A chainsaw without sharp teeth should not be used for the following reasons:

1. Increased load on the user. Due to the increase in vibration, the body has to strain harder.
2. The load becomes cyclic.
3. The blanks are not of such high quality.
4. Reduced productivity and efficiency.
5. More fuel is required, as is oil.
6. The load on the remaining parts of the chainsaw increases, they wear out faster.

If you ignore the need for sharpening, then in the future a more serious repair of the tool may be required. Efficiency, as a rule, is reduced by a factor of three. Also, the use of blunt equipment increases the risk of injury. It is necessary to correct this when the first signs of a decrease in the sharpness of the chain are found. You can do it yourself or turn to specialists.