We understand why the drain in the washing machine does not work. Root Causes - Setafi

When the drain in the washing machine does not work, the first thing to check is the hose, filter and pump. If all elements are working properly, just reboot the machine. But if this does not help, the reason is more serious. How to determine it and carry out repairs is described in detail in this material.

Self-diagnosis

Users often encounter a situation where the Samsung washing machine does not drain water. This phenomenon does not necessarily indicate a serious breakdown. In fact, the reason can be quite simple, so you can carry out the first diagnosis yourself without calling the wizard. You need to act like this:

1. Check the condition of the drain filter. It removes the waste liquid from the tank and prevents the ingress of small debris and foreign objects that can damage the drain pump. During operation, the mesh becomes clogged, so the water practically does not come out of the machine.
instagram viewer
2. When the Samsung washing machine does not drain the water, the reasons should also be looked for in the fact that the drain hose may break. It twists, breaks or is crushed. Therefore, the liquid drains too slowly or does not flow at all. It is necessary to carefully inspect this element and, if necessary, straighten or replace with a new one.
3. It also happens that the Samsung washing machine does not drain water due to blockages in the sewer pipe or in the connection area to the siphon. Then you need to dismantle the hose, then throw it into the sink. Next, turn on the drain program, and the waste water will go away. After that, the sewer pipe is cleaned.
4. If the drain does not work in the Samsung washing machine, you should make sure that the mode settings are set correctly. For example, many models have a no-spin wash program that is used for delicate fabrics.
5. Another explanation for why the drain in the washing machine does not work is due to the incorrect connection of the unit to the drain. Some users purchase rather long hoses. If they are more than 3.5 m, the pump may not develop enough power to pump water. Therefore, the device should be placed as close as possible to the sewer pipe.
6. When the Samsung machine does not drain the water, the reason may also apply to the operation of the electronic module. Sometimes it fails, and the unit stops working or freezes. You need to unplug it for a few minutes, then plug it back in and see if it works fine.

When are repairs needed?

Before starting repair work, you need to accurately determine the cause. To do this, you need to figure out why the Samsung washing machine does not drain the water. You can diagnose a particular error by external manifestations (sound, smell) and by the code that appears on the display. The main signs and repair methods are described below.

Drain pump broken

In practice, users quite often encounter the fact that the Samsung machine does not drain water. Moreover, one of the probable causes is a problem in the operation of the drain pump. This element consists of a small motor and a rotating impeller. If foreign things get into it, the impeller is blocked. An additional load is placed on the motor, and it may burn out. That is why the water in the Samsung washing machine does not drain.

Such a violation can be determined by several signs:

• the liquid does not go away as quickly as usual or does not drain at all;
• you can not hear how the pump works;
• an error appears on the screen indicating a drain problem.

By all these signs, it can be determined that the Samsung washing machine does not drain water precisely because of the pump. Therefore, it is necessary to de-energize the device, remove the pump and clean it thoroughly. If the impeller breaks or the motor burns out, the part cannot be repaired - it must be replaced with a new one.

Blockage in the drain

The drain in the washer is not a single element, but a whole system consisting of several interconnected parts. If your Samsung washing machine won't drain, the problem could be with any of these items. You need to carefully examine each:

• pipe branch;
• pump;
• hose;
• filter;
• sewage pipe.

Surely there is a blockage in one or more parts of the drain path, because of which the water will leave too slowly. If the situation is running, the Samsung washing machine does not drain the water. It should be turned off, disassembled, inspected and, if necessary, cleaned.

Electronics failure

It is far from clear in all cases what to do if the Samsung machine does not drain the water. Many users begin to look for an explanation that a blockage has occurred, although sometimes this is due to the control electronic module. In fact, this is a board with a processor that controls the readings of all sensors and runs the necessary programs.

Almost always, the electronics work fine, but if Samsung does not drain the water, this can be explained precisely by the failure of the functions of the electronic board. It can be damaged due to a sudden voltage drop in the network or water ingress. In this case, some contacts begin to rust and even burn out. Then it is clear why the Samsung washing machine does not drain the water.

You can also determine the breakdown of the control module by freezing the device. It may stop responding to commands and even turn off. In addition, the washing modes will begin to falter. If this is a one-time case, you can simply turn off the device and turn it on after a few minutes. But if the drain on the washing machine does not work and freezes continue, you will have to call the wizard for diagnostics and repairs.

Pressure switch failure

Each washing machine has a special sensor that evaluates the liquid level. Therefore, if the Samsung washing machine does not drain the waste water, this can also be explained by a breakdown of the pressure switch. One of the main diagnostic signs is a malfunction of the drain pump. An appropriate error will appear on the screen.

To repair, you need to figure out why the drain does not work. If you can’t do it yourself, it is recommended to call the wizard. The breakdown may not be serious - for example, a hose has broken or left its place. Then it must be returned to its place or replaced with a new one.

Wiring damage

It also happens that the drain of the Samsung washing machine does not work due to faulty wiring. Components can gradually wear out under the influence of vibration. If the unit is in a private house, it can also suffer from rodents.

Then the Samsung washing machine does not drain, and the pump does not function. The corresponding error code appears on the screen. To diagnose a malfunction, you need to ring the electrical circuit, and then twist the wires. You may need to completely replace the wire loop.

Thus, the reason why the Samsung machine does not drain water is varied. Most often, the problem is related to the drain itself, although sometimes you should look for violations in the wires and even the electronic module. If you cannot diagnose it yourself, you must contact the service center.