Super-Plus Bio: instructions on what is important to pay attention to when using it – Setafi

Have you purchased a Super Plus Bio air purifier but have lost the instructions? Or found a device, but also without instructions? Then read on - the Super Plus Bio air purifier, technical specifications, what is included in the kit, what is not covered by the manufacturer's warranty, how take care of the Super-Plus Bio cleaner, how to use the Super-Plus Bio air cleaner, what malfunctions can occur when using the device, their causes and how to correct.

Air purifier, what is it and why. An air purifier is a device for filtering and purifying indoor air. To do this, the devices are equipped with electric motors that drive air from the room into the structure. But there are models with a different principle of operation, for example, "Super-Plus Bio" works on the principle of ionic wind. Invariably, from this inside, the air passes through special filters / cassettes. As a rule, they consist of several stages of purification. There are models of air purifiers that are equipped with additional functions - humidification, ionization, elimination of unpleasant odors, air sterilization.

Technical characteristics of the air purifier "Super-Plus Bio"

• Required power: AC 50Hz, voltage 220V (can operate at 200/240V)
• Consumption: 9-9.5 Watts
• Cleans the air in the room volume: 20-130 cubic meters
• Filters particles in size: from 0.3 to 100 micrometers
• Claimed cleaning efficiency: 96%
• Modes, quantity: 5 pieces
• Dimensions: 28.7 by 19.1 by 10.2 cm
• Weight: 1.8 kilograms
• Claimed service life: up to 10 years
• Manufacturer's warranty: 3 years
• Warranty from the store-seller: depends on the store

Complete set of the air purifier "Super-Plus Bio". The Super-Plus Bio air purifier kit includes three elements:

1. The air cleaner itself
2. Device packaging
3. Documentation (manual, passport)

Check that the seller provides you with a complete device.

How to store / under what conditions to use the cleaner "Super-Plus Bio". The device must be stored / used in rooms with a temperature of +5 to +35 degrees Celsius. Relative humidity should be up to 80%. The higher the humidity, the less efficient the air purifier works.

If you transported / stored the device at a negative temperature, then the device must be heated before turning it on. Keep it at least two hours at room temperature.

The device is not shockproof - protect the "Super-Plus Bio" from bumps, drops and other mechanical impacts. At temperatures above 40 degrees, the purifier circuits and boards begin to short-circuit, because of this it will not work correctly. The same effect will be if moisture gets inside the case.

Warranty not covered. The manufacturer's warranty is 36 months from the date of purchase indicated in the passport. If the date of purchase is not indicated in the passport, the period starts from the date of manufacture of the device. The warranty does not cover the device if it has mechanical damage. If you decide to disassemble the device for repair yourself, the service center may refuse to provide you with warranty services.

It is recommended to keep the packaging of the device until the end of the warranty period. In the rules for using the cleaner, it is prohibited:

1. Cover/close the air intake grilles during operation
2. Inserting foreign objects into the machine
3. Use the unit in a room with relative humidity above 80%

If you have a high sensitivity to ozone, we do not recommend staying indoors while the purifier is running.

The design of the air cleaner "Super-Plus Bio". The design of the device consists of two main parts (body and cassette). The cassette is a filter through which air passes. It is inserted into the case from above and is fixed with latches. The control panel is located on the front of the case. On it, you can select one of five modes and turn on / off the device. The device only works in a vertical position.

The principle of operation of the air cleaner "Super-Plus Bio" is based on the "ionic wind". That is, the purifier sends a small corona discharge into the air next to it, because of this, dust, dirt and other small particles that pollute the air acquire a positive charge. And in the cassette inside the device, there are settling plates with a negative charge.

The device beats the air with a current, the dirt receives a positive charge and pulls the air with it to the plates with a negative charge. Contaminants settle on the plates, and air passes through the cassette. In it, it is filtered and treated with ozone to eliminate unpleasant odors and suppress the vital activity of microorganisms. Bacteria, viruses, spores do not survive in high ozone air. Air escapes through the grilles.

Thus, the device is able to clean the air from 96% of contaminants (dust, fluff, fur, wool, smoke, bacteria, microorganisms, unpleasant odor) in a room with a volume of 20-130 cubic meters.

How to use Super-Plus Bio cleaner

• The air purifier should be installed at a distance of 1.5 meters from the main place of residence of people. This is due, again, to the release of a large amount of ozone, which, with a strong concentration, will adversely affect health.
• After determining the place and correct installation (vertically, the place for the cassette is located on top), insert the plug of the device into the socket (voltage 220 volts, frequency 50 hertz).
• To turn on the machine, press the on/off button.
• To select one of the five modes, hold down the on/off button. The model with LED backlight will change color depending on the selected mode. For a model with a liquid crystal screen, all information will be displayed on the display.

There are 5 operating modes in the device, they differ in cleaning speed, efficiency and the number of work / rest periods. The minimum mode is the least efficient, but is suitable for continuous operation. It can be used by people with high sensitivity to ozone. The maximum mode is recommended for one-time quick cleanings.

List of operating modes with a brief description

• Minimum - for cleaning a room up to 35 cubic meters, it is recommended to use for people with ozone sensitivity, the LED strip / indicator glows green. Intervals: work 5 minutes, rest 5 minutes.
• Optimal - for cleaning rooms with a volume of 35-65 cubic meters, the indicator glows yellow. Intervals: work 10 minutes, rest 5 minutes.
• Maximum - cleans rooms with a volume of 65-100 cubic meters, when this mode is selected, the indicator lights up red. Intervals: constant work.
• Forced - a mode of active air purification from microorganisms to prevent the spread of infections. It is recommended to use up to 2-3 hours in a row with a break of 5-6 hours. After 2 hours from the moment of switching on, the purifier will automatically turn off the forced mode. To enable this mode, press the button 7. On models with LED illumination, indicators 6 and 8 will glow green. During the operation of the device in this mode, there should be no people in the room.
• Forced plus - the same forced mode, only it does not turn off automatically - it works all the time. Use in rooms with a volume of 100-130 cubic meters. To turn it on, press the button 7 twice and hold, while the backlight will be red.

What can be a malfunction of the device, their causes and how to fix it. There are two main malfunctions of the device: the device does not turn on (the indicator does not respond / flashes) and there is a lot of noise during operation.

Possible reasons for the first problem could be:

• The cassette is not fully inserted into the structure or not dried well (it should be dry when you insert it into the case)
• Nutrition problems

To solve it:

1. Take out and insert the cassette until it stops
2. Dry the cassette
3. Check the wire, socket and power supply for faults
4. Contact the service center

Possible causes of the second malfunction:

• The cassette is too dirty/large-sized dirt has entered the cassette
• The cassette is not dry well
• The cassette is not inserted correctly into the case

To solve it:

1. Rinse and clean the cassette
2. Dry the cassette thoroughly
3. Remove and re-insert the cassette until it stops