Learning how to disassemble the Ariston washing machine. Best Hotpoint Washing Machine Repair Tips – Setafi

For repair of the washing machine, replacement of spare parts and a thorough inspection, it is necessary to disassemble the unit. For this, a standard set of screwdrivers and a diagram of the device itself are sufficient. But it is worth considering that each model range has its own characteristics, for example, non-standard mounting of counterweights or a non-separable tank that needs to be broken to remove the drum. Instructions on how to disassemble the Ariston washing machine, a step-by-step description of the process with a photo is presented in this material.

Required Tools

Before you understand how to disassemble the Ariston Hotpoint washing machine, you should prepare the basic tools:

• a set of screwdrivers (cross and flat);
• a set of keys;
• separately you will need open-end keys (8 and 10);
• bit;
• hammer;
• pliers;
• hacksaw for metal;
• wire cutters;
• flashlight.

Preparatory stage

Dismantling the Ariston washing machine begins with the fact that it is de-energized, disconnected from the network. Next, they act like this:

1. Be sure to close the cold pipe faucet that supplies water.
2. Move the unit away from the wall and furniture so that it can be conveniently approached from any side.
3. Remove the nut securing the inlet hose. It should be removed, because the back panel is also removed during disassembly.
4. Also, disassembling the Hotpoint Ariston washing machine involves the preliminary dismantling of the drain filter. It is located below, right behind the hatch. Therefore, the hatch must be opened by removing the latches. Substitute a low capacity, unscrew the filter.
5. If necessary, clean it from extraneous layers, rinse under running water.

Removing the Cover and Front Panels

Now the main stage of the instruction begins on how to remove the top cover of the Ariston washing machine. You need to start removing the cover and front panels. The sequence of actions is as follows:

1. To remove the top cover, take a screwdriver or hexagon and unscrew the bolts.
2. Then it is gently pushed in the opposite direction from the person, lifted slightly up and removed. As a result, the view will open something like this picture.
3. Pull out the tray - to do this, press the latch in the center (it is usually blue) and carefully pull the part towards you, while rocking left and right.
4. Next, you need to understand how to disassemble the Hotpoint Ariston washing machine to remove the front top panel. Find the screws behind the tray (behind the part).
5. Pry out the plastic latches using a flathead screwdriver. At this stage, it is recommended to take a picture of the wires so that they can be easily put back together.
6. Disconnect the contacts and remove the panel. On some models there is a special hook for hanging them. In this case, the method of disassembling the Hotpoint Ariston washing machine is simplified.
7. If you want to remove the tank as well, go to the cuff - you will need to remove the clamp from it by prying it with a screwdriver. It is convenient to fill the cuff inside the tank.

Dismantling parts at the rear

The next step in the instructions on how to disassemble the Ariston washing machine is related to the dismantling of the parts that are located at the back.

The sequence of actions is as follows:

1. Visually find the motor - it goes right under the tank.
2. Disconnect all wires that come to it.
3. Unscrew the bolts that fix the engine (usually 4).
4. Gently rock the engine back and forth, pull it up.

When wondering how to disassemble a Hotpoint Ariston washing machine, you need to understand how to remove the heater. To do this, dismantle the wires and terminals that lead to it, take out the heating element and, if necessary, clean it. If necessary, it is removed from the socket, but then during assembly it is necessary to put a new sealing gum.

Further instructions on how to disassemble Hotpoint Ariston describe how to remove the drain pump. The unit must first be placed to the left (if you look at the door, as usual), because otherwise it cannot be reached. The algorithm is this:

1. The screws that secure the bottom cover are removed (some models do not have it, then this step is skipped).
2. To disassemble the Ariston washing machine with your own hands, unscrew the screws that secure the filter in front.
3. Then, when the fastening loosens, the filter is gently pushed, and it falls into the hand along with the pump.
4. Next, they take the pliers and unbend the clamp that fixes the drain pipe (it must be separated from the pump).
5. Unscrew all the bolts that connect the pump to the filter.

Dismantling of parts at the top

At the last stage, instructions on how to disassemble the Ariston washing machine drum and other elements work as follows:

1. Open the connector of each wire that leads to the temperature sensor and filter.
2. The pressure hose must also be removed from the sensor.
3. To remove every detail - for this it is enough to unscrew the screws. This is a fairly simple step - no more difficult than the way to remove the cover of the Ariston washing machine.
4. The sensor hose must also be disconnected from the tank, because it can be damaged during operation. Since it is attached with plastic clips, it is enough to bite them using wire cutters.

How to remove counterweights

We can say that the last steps that complete the analysis of the Hotpoint Ariston washing machine are described above. But it is also worth describing the instructions for removing counterweights. For many devices, they are fixed with simple fasteners, the dismantling of which is intuitive.

But in the case of Ariston, the situation becomes more complicated, since the manufacturer uses a special type of mount. To remove them, a special key is used, which must be purchased in advance.

After removing each counterweight, the racks can also be dismantled. Here the work will go easier, because they are fixed with plastic rods. For dismantling, the latches are pressed and, with the help of pliers, the stem is pulled towards itself.

How to remove the drum

After removing the counterweights and racks, it remains only to understand how to remove the drum of the Ariston washing machine. Now it is held only with the help of hanging hooks. For dismantling, the tank is lifted and mechanically removed from these hooks.

If you want to get the drum itself, the tank will have to be cut, because it cannot be disassembled (like many other devices). You need to act like this:

1. Take a hacksaw and set the tank on edge.
2. Saw along the perimeter and remove the upper fragment.
3. Turn over and hit with a hammer a little so that the drum comes out.
4. If necessary, proceed to replace the bearings.

Thus, do-it-yourself disassembly of Ariston washing machines is quite accessible even with simple tools. It requires not so much advanced skills as accuracy. In addition, the models of this manufacturer have several assembly features that it is better to know about in advance.