How to sharpen a hoe at home

Hoe - a necessary tool for any gardener to cope with weeds. When a tool becomes dull, its effectiveness decreases. It needs to be sharpened periodically. There are several suitable methods for this that can be used at home.

How to sharpen a hoe with a grinder

Using a grinder is a simple method. Together with it, a thick grinding disc is used as an attachment. Thin ones are not suitable for sharpening. If it comes into contact with sharp corners, there is a possibility that such a disk will shatter.

First, the hoe is fixed. A vice is suitable for this. The holder must be clamped so that the blade points upward. Then you should turn on the grinder and set it to high speed. Begin to move the disk carefully, moving from one end of the hoe to the other.

When working with an angle grinder, you must carefully ensure that the metal does not overheat. It is better to sharpen in several approaches.

If quick sharpening is required, the metal should be cooled regularly. To do this, water it with cold water every few minutes or simply dip it into it periodically. When sharpening, you need to start from the end of the blade, gradually moving towards the base.

You need to make sure that the blade does not become too thin. It will be easier for them to work, but the metal will quickly become dull again, literally in a few hours.

How to sharpen a hoe with an electric sharpener

To improve the performance of garden tools, an electric sharpener is often used. When implementing this method, there is no strong heating of the metal, which allows it to retain its properties and strength.

Sharpening with a sharpener is slower, so the thickness and direction of the angle remain under control. With this method, the metal does not chip and the circle does not break, which makes the process safer.

The tool is placed so that there is an angle of 35 degrees between it and the blade. This will allow you to get the right amount of spiciness - not too much or too little. Otherwise, the hoe will either quickly become dull again or will not be effective when working with thick weeds.

When sharpening, you should move from the center to the corners. There may be places on the surface where the metal has been removed to a greater or lesser extent than in other areas. These areas should be re-treated. The quality of the result is determined not only visually, but also by touch.

How to sharpen a hoe with whetstones

For many years, sanding blocks have been used as a tool to improve the sharpness of equipment. You need to use not only fine-grained, but also coarse-grained donkeys. The latter are necessary for rough processing of inventory. Fine-grained ones allow you to achieve good results and are used at the final stage of sharpening.

For coarse-grained donkeys, it is better to choose massive, long ones. This will speed up the sharpening process and more effectively remove the required amount of metal. Start from the base of the blade, moving towards the edges.

The main advantage of this method is the mobility of the whetstones. You can carry them with you and process the tool on the spot, directly in the garden.

Hoe allows you to effectively control weeds on the site. With active use of the tool, its blade quickly loses its former sharpness. You can correct the situation with your own hands using several methods. The choice depends on personal preference. It is important to exercise caution and safety precautions when working with any of the options listed. It is worth remembering that the procedure will have to be repeated periodically to maintain the sharpness of the blade.