- Error value E24 in the dishwasher BOSCH
- Causes of error E24
- How to fix the problem with error E24
At home, various appliances are simply indispensable, and any housewife will be happy with a functional dishwasher. On the one hand, this device cannot be called strictly mandatory for the home, but on the other hand, it turns out to be extremely useful. Because of this situation, there is a misunderstanding when using various difficulties. And quite often a lot of questions are caused by the error E24 in the Bosch dishwasher.
Any diagnostic information usually appears on the unit display. As a rule, in such situations the machine stops working and gives the code of the corresponding error on the screen. It is usually assumed that after that some actions will be taken. And here it is important to properly understand what is E24.
Error value E24 in the dishwasher BOSCH
First, it should be noted that the instructions for household appliances contain useful information, including the decoding of code marks. This will help to understand the cause of the malfunction, but this is far from always enough to correct the situation. However, the first step needs to be done.
Error E24 in the BOSH machine indicates a problem with the discharge of water. Practice shows that quite a few different reasons can lead to this. You can make an approximate list of what can serve as a shutdown of the unit:
- sensor malfunction;
- problems with the performance of the drain pump;
- failures in the electronic control system;
- common blockages;
- kinks drain hoses, etc.
Often in such situations, when the dishwasher demonstrates an E24 error on the screen, it is recommended to simply clean the system from blockages or straighten the hose. But still, not everything is so simple in reality, so it is better to listen to experienced users and professionals involved in troubleshooting with household appliances.
Causes of the E24
Error Many owners of this technique have many questions. It is hard to believe that the cause is the bending of the hose, because the BOSCH dishwasher is in normal condition on a flat surface, so something is unlikely to lead to such consequences.
Another important point is that the error E24 on the BOSCH dishwasher occurs at all at the beginning of the cycle. In just a few minutes, she simply does not have time to draw water, so it can hardly be directly connected with the drain. If you are faced with a similar situation, then you need to be more attentive to the matter.
In some cases, this error may be combined with another error E22, which indicates clogged filters. They can alternate with each other on the screen. Attention should be paid to this, because for sure the problem is connected with the blockage.
How to fix the problem with an error E24
Despite the fact that the situation in practice is quite diverse, you still need to follow the basic recommendations of the manufacturers. As soon as an E24 error occurs, it is recommended first to pay attention to possible blockages in the drain system. Conventional activities come to the fore:
- drain hose inspection;
- cleaning the drain filter located at the bottom of the unit;
- removal of hard debris from the pump gear, etc.
It is important to note that, in principle, these measures are part of the maintenance work related to maintaining the dishwasher. BOSCH units under the filter have a plastic cap, which must also be removed to get to the mechanisms.
Experts recommend checking for blockages between the drain hoses and the drain for sewers. Perhaps you should use a special cleaning brush or similar tool.
Error E24 and how to eliminate blockages of the pump
In more serious cases, the problem is connected with blockages of the pump itself. Over time, this happens and he just stops pouring water. On the dishwasher screen at the very beginning of the cycle, you can see the error E24.It will require more specialized intervention using different tools.
The troubleshooting procedures go through several steps:
- turn the unit over to reach the pump at the bottom;
- unscrew the panel from the side and back;
- carefully remove the bottom of the unit, unscrew the lower front panel of the case;
- must pay attention to all fixtures and holders to get to the inside of the dishwasher.
The above procedures will allow you to get directly to the drain pump. It is a unit with special outlets, which, in turn, are connected to the nozzles. The pump itself must be carefully turned and pulled to the side. In the plastic case there is a heating element.
Of course, all procedures of this kind should be performed only with disconnected wires and disconnected sensors.
If the Bosch dishwasher has been in operation for too long, then hair and other garbage are wound around the pump impeller. They rarely become the main cause of a malfunction, but still make it difficult to work. It is better to pre-clean everything, but in order to do everything more conveniently, you should pull out the shaft.
What if the Bosch dishwasher gives error E24?
On the one hand, the E24 problem occurs quite often, but on the other hand there is no clear indication of this or that reason. Because of this, the owners of the equipment just fall into a stupor and believe that the Bosch typewriter has come to an end. Of course, you should not give a panic, because often you can do something and fix the situation.
As practice and real experience of owners of BOSCH dishwashers shows, the methods mentioned above in this article do not always help. Cleaning the filters and the drain hose, removing debris is an important and integral part of the proper operation of your machine, but this always leads to the desired result.
In some situations, the pump itself simply simply refuses to work properly. To do this, check the rotors, rotating impellers and more. A simple lubricant for moving mechanisms may be useful.
Sometimes the following actions help:
- turn on the dishwasher;
- wait 1-2 minutes( at this time the pump should work);The
- should then be followed by a characteristic click, after which the water begins to flow;
- literally in 30 seconds you need to open the cover.
The moment you need to catch correctly, but often it allows you to bypass the error E24 on the Bosch dishwasher. After that, you can close the door to continue washing cycles. Because of this, some suspicions arose that the problem was not so much with the drain as with the lock on the door.
