It’s nice when opening a wardrobe or unpacking things from a suitcase, to see rows of neatly folded clothes, because then you can quickly find and put on the necessary wardrobe item without losing time at the ironing board. But sometimes we are so lazy to fold everything smoothly, and there is not always enough time for it. Fortunately, there were many life hacking and, knowing these simple tricks, you can save a minute. There are several simple ways to quickly fold a t-shirt.
- The classic way
- How to quickly fold a t-shirt using the Chinese methodT-shirts in a neat square, which does not take up much space in the closet and does not wrinkle. For this, the T-shirt laid out on the table is folded in half so that the sleeves coincide with each other. Stretch the folds of his hands. The sleeves are folded over a T-shirt.
The lower part is combined with the top. It remains only once again folded in half.
How to quickly fold a T-shirt using the Chinese method
This method allows you to quickly fold a T-shirt by three points. One thing when using this method takes no more than 2 seconds. From the first or second time it may not work out very carefully and for quite a long time, but after several trainings you can do it with your eyes closed.
. ..Things packed in this way do not take up much space and will never hesitate during storage in the closet. For the first workout is better to use small shirts.The selected T-shirt should be laid out on a firm and level surface. A table, an ironing board or even a floor will do. For a start, the thing is turned on the front side and laid back on the table.
Mentally mark the fold line between the neckline and the sleeve( this is approximately the middle of the shoulder seam).Visually draw a straight line to the bottom. The first grip point is the middle of the shoulder seam, the third is the bottom edge. The middle of the line drawn is the second capture point.
With the left hand grab the fabric at the first point, the right at the second. In doing so, care must be taken to pinch both layers of matter. The left hand, without releasing the clamped tissue, hold under the right to the third point. Capture the edge of the fabric on an imaginary line, without releasing the shoulder seam.
At the last stage, the left hand is returned to its original position. The fabric is lifted and slightly shaken so that it lies as it should. After that, it remains only to bend the second sleeve.
How to fold a T-shirt using cardboard
loading. ..This is a less quick way than Chinese, but it is very neat. This method is used when packing clothes in stores. It can be applied to shirts or hoodies with long sleeves.
This requires an A4 format carton or thick magazine. The selected item is placed on a horizontal surface with the back up. In the center place the prepared cardboard. The top edge of the paper should be at the level of the collar.
One side of the shirt is bent and laid on top of the cardboard. The sleeve is turned up. The same is done with the second side. After that, bend the lower part. In this way, the matter is wrapped around cardboard. The paper can be pulled out by pulling to the side in the gate area. If you leave things stored with cardboard, they are guaranteed not to hesitate.
Do not proceed to folding immediately after ironing things. On the hot fabric, creases form along the fold lines, which will be problematic to iron out.
There is another folding method using cardboard. It is faster than the previous one, but will require preliminary preparations.
First you need to make a device with which the entire process will be carried out. It is made of 6 identical square pieces of cardboard or plastic. The total area of the device is adjusted to the size of their belongings or use a universal 23 by 31 cm.
They stack 2 rows of 3 cartons each. The middle square of the first row is glued together with adhesive tape with the adjacent right, left and bottom. The side squares of the first row are fastened to the lower squares on the adjacent side.
The resulting design is laid out on the table. A t-shirt is placed face down on it. The left sash together with the fabric is bent and laid on the central part. The cardboard is folded back, the fabric is left folded. The same is done with the right side.
After that, it remains only to bend the lower sash. The folded T-shirt is removed and stretched on a new cardboard.
Roll by Marie Kondo
The Japanese method, designed for Marie Kondo, allows you to store things in a closet, not folded in piles, but standing upright, like books. The main convenience of the method is that the clothes do not fall apart if you pull one thing out of the middle of the row.
T-shirt is placed on the table face up. Bend the sleeve and 10-15 cm side to the center. Level out. Sleeve gently bend back. The same is done with the second half. The result should be a long rectangle.
The lower third is turned 2 times to the center. The resulting strip is bent in half. In the folded form, matter is like a small book.
How to store T-shirts neatly in an
cabinet. In the classic version, all clothes are stored folded in neat piles on the shelves of the closet or in the chest compartments. However, this option is not very convenient, since the pile now and then tries to crumble.
Japanese-style store T-shirts folded using a special method, setting up standing like books on a shelf.
For those who like things to hang in the closet on the hangers, the way of hanging with the help of a chain is suitable. To do this, a long chain is attached to the first hanger, and all subsequent ones cling to its links. Thus, the hanger does not take up much space and are located almost on top of each other.
Another compact storage option when t-shirts are placed in boxes twisted into a roll.
How to fold a polo T-shirt
Neither the Kondo method nor the three-point method is unacceptable for such things. The collar, which is considered to be their distinguishing feature, will not allow efficient use of any of the quickest ways.
For polo T-shirts, they use either the cardboard method or the classic folding method.Thing spread on a horizontal surface face down, smooth all the folds and straighten the collar. The t-shirt is visually divided into three equal parts. On the left side, fold a third of the fabric inward to the back of the product. Straighten the collar, bend the sleeve down. The same is done with the other part.
The resulting flat rectangle is once again divided into 3 parts. Lower curved back. The resulting quad is folded in half. Be sure to re-adjust the collar at the end of the process to avoid the formation of creases.
How to put things in a suitcase
So that things for traveling do not get crushed in a suitcase and take up much space, use a special method of rolling.
For this, clothes are spread out on a flat surface, all wrinkles and creases are smoothed. Bottom tuck 10-15 cm of fabric. Visually divide the T-shirt into three parts and fold both extreme sides to the center, as in the classical method.
After this, the resulting rectangle begins to gently roll into a tight roll from the gate to the bottom of the thing. At the end of the process, the structure is fixed with a lapel made at the beginning from the bottom.
With this approach, things are very compactly placed in a suitcase and crumpled during transport.
In a simpler version of the roll-up, the T-shirt is turned upside down, after which it is folded along in half in parallel to the side seams. The sleeves are gently folded in the opposite direction so that they do not protrude beyond the edge of the T-shirt. Roll the roll from top to bottom and fix.
