The washing machine does not go into the rinsing mode

If you have a washing machine, most likely you have long appreciated all its advantages. Modern housewives have long forgotten what it means to wash, rinse and wring clothes manually.

Nevertheless, even the best and high-quality washer is still a technique, it tends to break. Quite often, a situation arises when the washing machine suddenly stops in the washing process, does not rinse or spin clothes. Why is this happening and how to eliminate the trouble? Let's look at the most common reasons.

The washing machine badly rumbles underwear

If the washing machine does not caress the linen or does it badly, there may be several reasons, from the most simple and banal, to complex and unpleasant. Here are a few situations where the reason is not at all in the failure of the unit:

Overload .If you load too much laundry into the machine, the washing powder has little space and it is not very soluble. It is clogged in the folds of clothes and is not in contact with water.

A large amount of powder. Sometimes white stains on linen are due to the fact that the amount of powder far exceeds the volume of water provided for rinsing. To eliminate the trouble, just run the extra loop several times.

Low water pressure. Insufficiently strong pressure occurs for two reasons:

• problems in the entire water supply system;
• clogged hose supplying water to the unit.

In the first case, you will not be able to do anything, you just need to wait until the situation improves. In the second - you need to clean the feed nozzle and the mesh filter installed at the entrance to the system, the rinsing program will work again.

If none of the above is confirmed, it is likely that the cause of the trouble lies in the breakdown of the washing machine itself.

The washing machine is “frozen” and does not go into the rinsing mode.

The situation looks like this: the washing machine starts up in normal mode, erases for a while, but for some reason the program stops and goes into standby mode. First you need to find out what exactly your assistant does not want to do: rinse, squeeze or pump out water.

First of all, you need to reset the current settings, select the “drain” mode and run the washer again. If nothing happens, examine the integrity of the drain hose. It is likely that he simply twisted or was overwhelmed with something heavy. Therefore, the washing machine does not wring out the laundry. Is the hose okay? See if there is a blockage in the sewer. To do this, carefully disconnect the drain pipe and lower it into the bath or sink. If the program "drain" earned, then it's plumbing.

Tip:

Read also: How to drain the water from the washing machine, if it broke

After all the manipulations done, everything remained the same and the washing machine does not rinse or spin clothes? So everything is bad - the problem is in the car.

The washing machine does not rinse or squeeze the

. Before starting the troubleshooting, the machine must be de-energized. Be sure to remove the plug from the outlet, this is very important! Now it is necessary to force the unit out of the water. This can be done through a drain filter. It is located at the bottom of the machine, behind a small panel. Now take out the laundry, you have to rinse and press it manually. Everything is ready, start troubleshooting.

This is the most common answer to the question of why the washing machine does not go into the rinse mode or badly squeezes the laundry. In the dirty water that the machine drains after washing, a lot of garbage remains. Sand, dust, dirt, hair, threads and small pellets and villi. Sometimes all this adds pockets. Garbage clogs the drain system and the water simply has nowhere to go. In order for the rinsing to resume, you need to thoroughly clean the drain and filler filter.

water level sensor broken

In the washing machine there is such a device - a pressure switch. It determines the water level in the unit's tank. Depending on the data received from this device, the control board commands the washing process. If the water level sensor is broken, the washer just "does not understand" what to do and stops.

The drain pump

has fallen into disrepair. This is another one of the reasons that the rinsing mode does not work, or that the washing machine does not squeeze things. The drain pump does not drain the water after washing and the washing machine does not caress the laundry. The cause of breakage may be getting into the drain pump of different objects or just a long service life.

If all hoses, filters and tubes are cleaned, the drain works as expected, and still the washing machine does not switch the rinse mode, you can find a couple more reasons.

Burned out the heating element.

If the heating element has blown, the water simply does not heat up to the set temperature. This causes the process to stop at the washing stage, and the rinse mode simply does not have time to start. If, setting the mode of washing, you set the temperature more than 30˚С, just touch the glass. Is it completely cold? It means that the heater is faulty and needs to be replaced.

The

control module has burned out. In other words, the control board has become unusable in the washing machine. Without this part, the machine stops receiving and receiving commands, which means that the rinse mode will not turn on.

A few tips

If you want your washing machine to always please you with clean and fresh linen, and the rinse mode always turns on and works perfectly, follow these simple rules:

• use only high-quality detergents;cheap powders are poorly soluble in water;
• load the machine a little less than it is necessary according to the instructions, leave more free space;
• carefully check pockets and cuffs before washing, be sure to remove dirt and foreign objects;
• half an hour after the start of the washing process, touch the glass, make sure that the water in the machine has reached the right temperature;
• use the “extra rinse” function without using rinse aid;
• at least once every six months, do preventive cleaning of water collection and drainage systems, and also check the filters.

If you follow these simple rules, your home assistant will please you for a long time with uninterrupted work.