Chicken feeder can do it yourself

, buckets, PVC pipes, plywood, partitioned board or boards. Therefore, it will cost significantly less than the finished one from the store. In addition, during its assembly, you can take into account the conditions of the birds( cage size), age and their number.

Article in the topic: how to make a bird feeder with your own hands?

Types of feeders and requirements for them

According to the method of feeding, they are divided into the following types:

1. Lotkovye - they are a long flat container with sides and a net or spinner on top, so that chickens and chickens will not be able to scatter food.
2. Bunker( automatic) - can hold a large amount of food, the food in the tray comes as it pecks bird. At the same time the feeding trough itself has small dimensions and a cover so that moisture and dirt does not fall inside.

The first type of trays can consist of several grooves( grooves), which allows you to pour different foods. This type of chick feeder is often fixed outside the cage to make it easier to maintain it. In addition, the likelihood that a bird will be able to scatter feed or climb on top is completely excluded. Feeders are placed on the floor, wall or suspended from the ceiling. They are attached to the wall with stainless steel clips.

For feeding grass it is better to use feeders in the form of baskets made of twigs or netting.

The basic requirements that must be followed during the assembly of chickens feeders with their own hands:

1. It must be done in such a way that the bird cannot climb on top of the feed or stand above it, otherwise the food will be filled up with not only garbage, but also excreta.
2. The tray should be cleaned and disinfected once every 1 or 2 days, especially if there is a large population, therefore its design should be easy to clean and have a low weight. The material for the feeder is better to choose from plastic or metal.
3. The size of the tray is calculated so that each bird can freely approach it, otherwise the weaker ones will not receive the required amount of feed. For an adult individual, a length of up to 15 cm is sufficient, and 8 cm for chickens, if the feeder is made in the form of a circle, 2.5 cm per one head is enough.

Before you make a feeder for chickens with your own hands, you need to consider what kind of feed you plan to feed the bird. If dry, for example, grain, a combined mixture or mineral additives, then for assembly almost any material can be used - wood, plastic or metal. For wet mash it is better to make plastic or metal, as they are easier to clean than wood. In addition, the tree due to excess moisture begins to rot.

incubator. Self-production of feeders

.Plastic is chosen tight, able to keep its shape. At a distance of 8 cm from the bottom, a hole is cut so large that the chickens can freely eat from it. The handle on the bottle is used as a loop, by which it is hung from the net or on a hook.

Before you start making a feeder for chickens of complex construction, such as a wooden bunker, you first need to calculate its dimensions and draw detailed drawings on paper.

To make an automatic feeder, you will need a plastic bucket with a handle( it will fit after building materials) and a partitioned dish. On the side near the bottom, along the entire circumference, holes are cut at an equal distance, through which the food will wake up.

After which the bucket is installed on the partitioned plate and they are fastened to each other. The partitioned dish should be 10-15 cm in diameter more than the capacity. Instead, you can use the bottom of another bucket. This feeder is either placed on the floor or suspended by the handle. The lid from the bucket will perfectly protect the food from rain and debris.

You can make a feeder and drinker for chickens from PVC pipe with a diameter of 15 cm. In addition to it, you will need 2 plugs and a tee, also made of PVC.The length of the pipe can be any, the longer it is, the more feed will fit in it. Two parts of a length of 20 cm and 10 cm are cut off the pipe. The first part is placed on the tee, and its free end is closed with a plug. On this part the feeder will stand. To the opposite end of the tee is connected to the longest part of the pipe, which will become the bunker. A 10 cm long piece is placed on the tee outlet, and chickens will be eaten from it.

rushes in better way

The second version of the PVC pipe feeder is floor standing. A pipe 1 m long is cut into 2 parts - 40 cm and 60 cm. In the short holes are cut( with a diameter of 7 cm) on both sides on one half of the pipe or only in the center. Of these, chickens will eat. One end of the pipe is connected to the length of the part( 60 cm) with a knee, and the other end is closed with a plug.

The length of all parts can be different, depending on the number of chickens and the required volume of the bunker. All edges of the holes should be smooth, without sharp burrs on the edges, so that the bird could not get hurt.

Do-it-yourself do-it-yourself chicken feeder - video