Connecting the boiler in the country

water supply A person who is accustomed to comfortableloviyam city life, strives to bring them the level of living in the country. It is in the countryside that the installation of communication systems and the installation of sanitary equipment depends on the owner himself. At your summer cottage, you can, at your own request, drill a well, lay a local sewage system, hold the desired type of heating in the house, install a shower cabin, connect a boiler.

Contents:

1. Choosing a boiler to give
2. Water connection rules
3. Connecting a boiler to the electrical network
4. Installing an indirect heating boiler

Choosing a boiler for giving

Installing a boiler to help solve a problem. A wide choice of brands of equipment will confound even the most experienced and knowledgeable buyer.

In order to choose the right model of the boiler, first of all, you need to decide on the factors that are important for you:

• the required amount of hot water;
• boiler operation from gas or electricity;
• installation location affects the choice of water heater of a certain shape and size;
• the quality of water consumed.

Electric boilers with dry fuel heaters

To give, they mainly install electric boilers with a reservoir capacity of 10 liters.and more, with a capacity of 1.5 to 2.5 kW and a stainless steel tank. If in the holiday village power supply failures often occur, backup power is required for the boiler to work.

For a house with individual provision with water from a well or an artesian well, it is advisable to purchase a boiler with dry heating elements. In such models, the heating element does not have direct contact with water. Tan placed in a steatite flask that protects it from the formation of scale and various raids. Frequent power drops of electricity adversely affect the operation of electronically controlled boilers.

The best option for giving is an electric boiler with electromechanical control and a dry heater.

Gas boilers for giving

Connecting a country house to the gas main provides an opportunity to purchase and connect a gas-fired boiler. In this case, the owner of the dacha will not depend on the quality of the power plant. For safe operation of the device, it is necessary to install insulated chimney and forced-air and exhaust ventilation.

To install a boiler of this type in your house you need approval from the gas service. Installation and connection to the gas system of the boiler must be carried out by specialists of the gas office. Water heating adjustment is automatic.

Indirect-type boilers with heating

Such water heater models are suitable for homes with an installed heating system. An ordinary boiler or antifreeze, heated by solar energy, will work for the boiler. The heating element is located inside the ceramic coil.

Rules for connecting the boiler to the water supply

If you do not want your house to be flooded at the most inopportune moment, learn the rules for connecting the boiler to the water supply. You will not need them only when the installation work will be performed by the specialists of the supplier’s company.

For self-connection, prepare the necessary materials and tools:

• pipes;
• tees, valves;
• ball valves, adapters;
• sealant;
• flexible hoses;
• pipe cutter, soldering iron;
• set of keys.

We consider how to properly connect the boiler to the water supply of polypropylene, metal, metal-plastic.

Polypropylene plumbing

From the tools you need a pipe cutter and a special soldering iron. For a quality connection, in addition to the basic materials, you will need end sleeves, turns, stabilized pipes and two additional tees. If the boiler is installed after the start of operation of the individual water supply, and the pipes have been bricked up, there will be work to remove the water supply from the wall.

Pipes to cut and solder tees. From them, install additional sections of polypropylene pipes to the boiler. Using the terminal sleeve, connect the pipe through the faucet to the boiler. Follow the same steps to connect the appliance to a hot water pipe.

To perform a quality connection with sealed pipes, use repair split couplings and tees. American soldered to the pipe and tee. After solidification of soldering, the docking assembly is assembled and installation continues. See the connection diagram below.

Metal-plastic water supply system

The main advantage of this water supply system is that pipes are always laid in an open way. Cut the pipe, build in the tees, hold the bends to the boiler and establish connections.

To connect the boiler to the metal-plastic plumbing, it is important to know the rules for working with the material.

Steel water supply system

Connecting a modern water heater to a metal water supply system is much more difficult than to pipes made from polypropylene and metal-plastic. For high-quality connection of the boiler you need a powerful clamp with a special cut-in nozzle, called "insert".A clamp is installed on the steel pipe together with the rubber gasket. The next step is to drill a hole in the pipe through the pipe with a drill and a special sleeve. Inset is ready. Further the thread is cut and sgony become. On the sidebar installed individual cranes. From them are pipes from any modern material to the boiler.

Consider a few of the connection features during operation:

• First, place the tie-in well of old paint layers.
• The diameter of the hole must match the size of the sleeve so that after some time the water supply to the boiler does not stop due to its pollution.
• The tie-in nipple should be positioned so that it is convenient to drill a hole and connect pipelines. It will be correct to direct the nozzle at an angle from the wall.

At the end of the article, watch the video about connecting the boiler to the water supply.

Installation of stop valves

It is necessary to follow a certain sequence of installation of stop valves for cold and hot water.

Install on the cold water supply pipe:

1. Install a tee on the nozzle of the tank.
2. Connect a water tap from the boiler to the tee side tap.
3. On the tee mount an explosive or check valve.
4. Put a shut-off valve behind the valve.
5. Mount the entire structure with a tie-in.

To install the stop valves on a pipe with hot water, it is necessary: ​​

1. Directly to the branch pipe of the tank, install a shut-off valve.
2. Connect the tank to the pipe.

Now you know how to connect the boiler to the water supply, and you can do all the work yourself. For full installation, you need to know the rules for connecting the heater to the electrical network.

Boiler Connection Rules( video):

Connection of the boiler to the

power grid

If you purchased a boiler with a capacity of up to 3 kW, there should be no difficulty with connecting to the electrical network.

It is enough just to follow the rules of connecting the boiler to the mains and there will always be hot water in the house:

1. The location of the outlet in such a place that accidental splashes of water do not get there.
2. Connect the boiler only when installing grounding. To do this, you need a three-pole socket and a three-core wire.
3. It is advisable to bring all electrical connections to the outside of the bathroom.
4. To connect the boiler to the mains, use an individual outlet.

Procedure:

1. Make a measurement of the distance from the outlet to the boiler.
2. Disassemble the boiler plug to pieces.
3. Remove insulation from the cable. Strip the wires with side cutters.
4. Solder the wires to the contacts of the plug. With the phase to combine red wire, yellow-green or black - earth, and blue - zero.
5. Remove the lid from the boiler and open the contacts.
6. Clean the wires at the other end of the cable. Connect to the boiler contacts and replace the cover.