Those routes that are constantly used should be drawn up thoroughly, so that later you don’t have to deal with trimming tiles and replacing sections. It is better to do it once qualitatively and reliably.
Paving slabs
In large volumes it is better to entrust the laying of paving slabs to a knowledgeable master, however, if you need to install it locally, you can do it yourself by observing the laying technology:
- First, mark the area with a rope and pegs, and then remove the 20 cm layer of soil.
- Rubble is poured into the recess, and then compacted.
- Over it we fall asleep sand and also ram it.
- The next is a layer of cement or dry plaster, which is compacted as much as possible in the same way.
- Now you can begin to lay the tile itself. The cells are placed tightly to each other and tapped with a rubber hammer.
To eliminate the likelihood of weed germination, lay a geotextile between rubble and sand.
Most often, wood is chosen as the second material for combination with paving slabs. It is well suited for zoning areas and space between tracks. Together with pebbles, wood-stone pattern looks very fresh and original.
Recently, pavement tile paths through which grass grows have become fashionable. This combination stands out for its singularity and ease of execution. The same is often done by replacing tiles with pebbles or wood.
Combination options with concrete
Typically, concrete is used to create large monolithic structures. It looks plain and boring, if you fill it with the entire area of the track. It should also be borne in mind that in regions with severe frosts, concrete is not the best choice, as it may crack.
The appearance of concrete slabs is completely transformed when combined with pebbles, wild stone or lush grass. Make sections of different lengths, adding special dyes and broken tiles for decoration. There are also special forms that are installed in the right places and then filled with a solution.
Wild stone
Wild stone is ideal for those who want to achieve maximum naturalness. It looks good both separately and in combination with pebbles, tiles or grass. Due to the rough surface, you will not slip on a stone even in rainy weather. As a rule, it is placed on the solution, although some place limestone on the sand. Please note that this option will be less reliable.
Pebbles
Paving pebbles is a great solution for decorating a combination track. In addition to excellent compatibility with other materials, it has a positive effect on human health, if you regularly walk on it barefoot.
The seemingly simplicity of the design actually results in a painstaking and complicated process of digging the recess, and preparing a sand-gravel cushion by analogy with paving slabs. Then the pebble is placed on the mortar.
A curb is required for any track. Do not neglect its installation, as it will give a unique look to the whole composition. It is worth the effort and money.
What is good gravel and crushed stone
The main advantage of bulk material is easy installation. In addition, special skills to create such a track are not needed. Crushed stone and granite chips of different colors look great in combination with wooden flooring and tiled borders.
Wood sections
This extremely popular version looks cozy and beautiful. In combination with stone chips wood sections look great. However, despite the fact that all wooden surfaces are treated with solutions against moisture, they quickly become unusable and are covered with moss in those regions where there is constant humidity.
The best solution in such conditions will be the choice of materials designed "under the tree", for example, some types of tiles.
In conclusion, there are 2 important points to note. First, whatever path you choose, it should be located at a height of about 5 cm from the ground to avoid excessive pollution during precipitation. Secondly, observe the angle of inclination in the direction of the curb for the outflow of water. Take advantage of our tips on creating combined tracks and hit your friends with the original design of your site.
