Light Switch with Remote Control

click fraud protection

Management of lighting fixtures in the distance is widely used in residential, administrative and industrial buildings. A typical device allowing to carry out the process, a light switch with a remote control. Control is based on different principles.

In the present article we described in detail all kinds of devices, allowing to manage the devices and lighting systems without direct contact. Independent master we will find a step by step according to their installation instructions. To facilitate the selection we have brought the most popular models on the market.

The content of the article:

  • Principles of operation of remote devices
    • Switch with infrared control
    • for light control device of the air
    • Management on the mobile phone or via the Internet
  • Selecting the control system at a distance
  • Advantages and disadvantages of control devices
  • Connect remote switch
  • Review of popular models DV
    • Popular RADIO Wookee
    • "Nootehnika" - based on infrared waves
    • German quality and design of the brand Jung
    • Practical models "Master Kit"
    • Compact and easy to use COCO
  • Conclusions and useful videos on the topic
instagram viewer

Principles of operation of remote devices

Modern devices, turns on / off the light in the region, typically operate on the basis of the radiation / hold certain frequency waves (sonic, infrared, ultrasonic, etc.).

Such devices usually consist of two parts:

  1. Receiver for chips, which is mounted near the lighting device or a mechanical switch connected power wires.
  2. Remote control (remote control).

Let us consider the most common varieties of such devices.

Switch with infrared control

Category devices operates on the basis of infrared wave emitter, a remote control which is carried out from a special unit connected in circuit. This makes it possible to turn on / off the lamp with the remote.

mobile phone management

The main disadvantage of such devices is the need for accurate guidance of the infrared signal, which must be located within the user's visibility

A number of manufacturers (BJC, Duwi, Simon, Steinel) found a way to avoid this problem. The models manufactured by these companies are equipped with controllers that convert infrared radiation in the radio signal, which allows to increase the radius of action and overcome encountered on the way barriers.

The circuit breaker assembly infrared

Detailed scheme of the remote switch assembly. At work, be aware that the copper wires should not be attached directly to the aluminum parts - this operation should be carried out through the terminal, or special connectors

In some cases, the team transformed into a radio frequency, the output is converted back to IR, it is necessary to control certain types of devices (air-conditioned). Another disadvantage is the lack of range of the infrared waves (up to 20 meters), which can be overcome by using repeaters.

for light control device of the air

Such devices often come in "Smart House" systemBut can be used independently. The RF remote switch command transmission process is performed using the remote signal which surrenders to the controller responsible for the control of light.

a particular frequency band allocated for the passage of information (typically, 315, 433, 868 mHz). Power radio transmitters in these devices is 10 milliwatts, which is regulated by law.

Radio-controlled device with remote control

The appearance of a standard remote control, used for devices operating over the air. Clicking on Knop commands, you can use up to 30 channels at the same time, however, works only one that gets the message his address

Despite the small rate, the radius of the devices is quite extensive: in open areas it reaches 100 meters, and on the spaces with obstacles - up to 25 meters.

Such a range of the device (it is possible to strengthen repeaters and other devices), as well as the ability to overcome obstacles are the main causes of the spread RADIO, which are used both in everyday life and in the production and administrative institutions.

Scheme of radio frequency devices

To carry out radio transmission requires the following equipment set:

  • battery (conventional batteries);
  • Remote controller, and connects to the load network;
  • Remote resembling RC to video or television apparatus. There pocket minipulty keyrings or device with buttons 2-6; such devices are used to control a small group of instruments.

remote management controller is mounted in a wall, the lighting unit (chandeliers glass) or a suspended ceiling.

Such a device is compatible with various varieties of bulbs: incandescent, halogen, fluorescent (Conventional and compact), and conventional linear LEDRegardless of whether they are single or groups are located.

wall RADIO

In addition to conventional remotes, there are also wall-mounted transmitters with compact dimensions and a limited number of command buttons. Such devices are attached to vertical surfaces with special holders or scotch

When the radio signal is transmitted as a packet of information: it contains a command, the address of the device which is intended to specify, as well as a checksum. Radio waves are received at once all the receivers, but because of the guidance addresses only the device reacts to it, which is designed for the team.

The transmitted checksum is used to verify information: number sent by the transmitter, must coincide with the number counted by the receiver. If the results differ, the device does not work.

For stable error-free operation, each command is transmitted transmitters repeatedly (at least three times) that slows the efficiency of the system. On RADIO usually also provides a button that allows you to disable control and manage the unit in manual mode.

Management on the mobile phone or via the Internet

In modern devices can be provided for dimming function using a smartphone or a mobile phone. In this case, the control is done over the Internet using spetsprilozheny, which are installed on a smartphone or computer. Typically, the software is part of the kit supplied with the unit upon purchase.

Driving light control via the Internet

A simplified diagram of the light source control using modern mobile devices. The use of this option is possible only if the Internet

These devices differ in a large, virtually unlimited radius of action, however, require the presence of Wi-Fi or other access to the worldwide network. With the help of mobile phones and smartphones, you can turn on / off lights, adjust the intensity, use the device special modes (standard and custom).

Devices for switching off the light, equipped with remote controls may also have additional functions, which include:

  • the ability to adjust the level of light intensity;
  • specially installed stationary button that allows you to find the remote control has got lost;
  • equipment timer, light sensor or motion.

It is only important to remember that each additional option increases the cost of the device.

Selecting the control system at a distance

When selecting a device to control is necessary to pay attention to a number of factors. It is to check whether the capacity of the power unit similar indicator lighting unit, as well as the desired voltage for the power switch. The latter should match the number of volts in the network to which you plan to connect a remote device.

The circuit breaker with a remote sensor

The device of modern remote control switch, which has a number of additional functions: response to moving objects, protection against natural phenomena and other

It is also desirable to assess the need for additional features, which are often equipped models: on the one hand, they significantly expand the scope of application of the device, on the other - they often remain in specific situations unclaimed.

Finally, certain important design tools, its shape, color, size, presence of additional lighting and other factors.

Advantages and disadvantages of control devices

Devices that allow to control the lighting by remote control, have certain advantages and disadvantages. The most important advantage is the ease of installation and ease of connection: the installation of devices does not require special knowledge.

It draws attention to the comfort of operation and the ability to continuously adjust the lighting. In some models there is also a function of the programming device by means of which "presence effect" can be set.

In this case, the device will be switched on / off automatically at a certain time, that can be useful in an empty apartment.

Remote Lighting Control System

Typically, manufacturers produce a set of equipment necessary to enable remote adjustment lighting fixtures. The power unit is to be connected to the existing mains

Using the control-instrument helps reduce power consumption and extend the service life of various types of lamps. In addition, the remote switch makes it possible to simultaneously manage with a single remote by several light sources or other devices.

Disadvantages of such devices include the case of a false or spontaneous activation; a weak radio signal that can pass through the barrier; possible effects on pacemakers or hearing aids.

Switches are in the open air, can not work because of the rain. In addition, the remote control at the wrong time can sit down batteries.

Connect remote switch

The circuit assembly of such devices is often dependent on light bulbs with which to operate the device, and other factors, so the instructions should be studied carefully before assembly, attached to the model.

Typically, the products are designed for standard 220 volts, although this figure may be underestimated when the specific requirements of the luminaire.

Connecting the remote device

When connecting any switch models with remote control is required to comply with safety rules. Do not touch bare wires without turning off the power

If the system includes a device, reducing the voltage required to initially mount the control unit and then to a transformer. By pressing a button on the remote control, the power unit supplies power either directly to the bulb, or a step-down transformer (depending on the light source). Most often, such a scheme is used for room lighting LEDs.

Depending on the model, the power unit may have one or more channels: the last option allows to simultaneously control several devices.

Experts recommend to connect the remote device through a traditional mechanical switch, which will be available when the machine with remote control fails.

Review of popular models DV

Such electrical equipment manufacturers produce different countries.

Popular RADIO Wookee

Remote devices produced by this company are composed of a set comprising a radio receiving unit and a remote control device. For comfortable use in the kit also includes a holder. Specially made it easy to attach holes allow this item to a vertical surface by conventional screws.

Models are equipped with two switches, so that devices can be operated with different power grids. Ultimate load can reach at each 500 watts. machine operation radius of 100 meters outdoors and 20 meters indoors. For the device to work properly, it is recommended to install it together with the relay in the distribution box.

"Nootehnika" - based on infrared waves

A well-known Belarusian company produces a line of switches with a remote control on the basis of infrared radiation "Sapphire". Presented in the model series are made of high quality polymers having a predominantly white.

remote switch

Remote switches "Sapphire" brand is produced in a wide range. Their action is based on the principle of infrared radiation exposure. The models differ in how to design and specifications

Products equipped with dimmers, allowing to regulate the flow of energy capacity that prolongs the life of the lamps. Given during the last activation parameters are saved in the new device is started, and it reduces the time to choose the desired brightness setting.

In many models, provides the function of simulating the presence in the house of the host associated with the periodic switching off / switching on the lamps in the house. The disadvantages of the models of this brand include low sensitivity sensors, because of which is difficult manual control: for correct operation of all the manipulations required to carry out his palm.

German quality and design of the brand Jung

The well-known German company that manufactures electrical products, paying attention to both quality mechanism and impeccable design.

Model remote light switches, produced at the enterprises of the company have a standard set of features, high build quality, the use of top-quality parts and components. A wide range of diverse product design allows you to choose a model that perfectly fit into the most refined interior.

The company's catalog includes "anthracite" line of devices (with black polished surfaces), bright patterns, made of acrylic and colored glass, the traditional form of universal product made of steel and aluminum, affordable devices from plastic.

A separate series of devices combines with moisture protection that are designed for use in environments with a high content of water vapor, for example, in the bathrooms.

Practical models "Master Kit"

The most popular devices of this brand are remote switches MK343 and MK344. The first option allows for remotely switching over two independent radio channels (allowable power of 300 W each).

Here, if the power unit is provided with a radiator, the instrument can withstand power of 1000 watts. To control device uses key fob transmitter, fitted with four buttons.

More advanced modification is considered a model MK344, which provides not only the on / off, but also the smooth adjustment of the light intensity on two separate channels.

All functions can be performed using the 4 buttons on the remote: two of them are used to supply the load, and the remaining two - to control the brightness of the lamps.

Compact and easy to use COCO

The company specializes in the production of wireless switches small size. Such devices are capable of operating with high power (3.5 kW) can be placed in a junction box for the power switch or outlet.

Ground chuck with remote connection

Compact remote device having a size and shape of a standard lamp. The original configuration allows to place the device in an ordinary cartridge chandeliers. Wiring is not required

The power unit in this case is mounted as follows. Selecting the appropriate load indicator, disconnect the power supply. Similarly, a conventional switch mounted power unit to be connected to the phase and zero.

Installing ACM-1000 RADIO COCO

The diagram shows the installation box in the mounting RADIO ACM-1000 COCO. The compound is produced by wire terminals, twisted together is not recommended

mains phase wire (brown) passes through the terminal block and is supplied to the L-terminal of the power block, whereas zero - is attached to terminal N. Socket, in turn, is connected to the output terminals bloc and N L, then it is possible to install the device.

It is also important to activate the command memorization mode, which is necessary to press the corresponding button. Then you need to submit a radio control signal. Indicator storing this information is a double flashing LED.

With the rules and guidelines of choice wireless light switch acquaint next articleEntirely dedicated to this interesting question.

Conclusions and useful videos on the topic

roller placed below provides an overview of the remote control lighting model:

Detailed instructions for connecting a two-channel remote control unit to the chandelier:

Using a variety of light switches with a remote control, you can remotely regulate lighting. These devices increase the standard of living, help to increase the service life of lamps and reduce electricity costs.

A wide range of devices of this type makes it possible to choose the model that matches your needs and possibilities user and ease of installation contributes to the self-assembly products with a minimum of time and effort.

Talk about how to choose the switch with remote control for decorating your own apartment / house. Perhaps you have useful technological nuances, which will be useful to visitors of the site. Please write comments in the block located below the form, ask questions, publish your photographs on the subject of the article.

How to connect a telephone, computer socket: schemes

How to connect a telephone, computer socket: schemesSockets And Switches

For the operation of electrical devices, you must connect to a local power network. Since you can connect the outlet with your own hands, it is not necessary to contact professional electricians w...

Read More
How to connect a light switch: circuits

How to connect a light switch: circuitsSockets And Switches

Very often, you need to independently branch out the wiring around the house, install sockets and switches. The main thing is to have at hand the instructions and the correct installation diagram....

Read More
How to disassemble the light switch: a step-by-step master class

How to disassemble the light switch: a step-by-step master classSockets And Switches

In the operation of domestic networks, switching switches and sockets are used to connect electrical appliances and room lighting. Due to natural aging, emergency conditions and excessive load, ci...

Read More
Instagram story viewer