- Jacob Delafon
- JSC Plant Universal
- OJSC "Kirovsky Zavod"
A cast-iron bath can serve for decades if, of course, a number of conditions are met. The walls of the product should be thick enough, and the enamel must be applied correctly. There are a number of other requirements for the production process, but these two are the most important. Unfortunately, it is difficult for an ordinary buyer, especially under the influence of the persuasions of experienced sellers, to determine the quality of individual samples, so it remains to rely on the manufacturer's name. Responsible companies do not save on materials, use modern equipment and technologies, give a guarantee on their products and supply it with relevant documentation. What are the best manufacturers of cast iron baths at the moment? What products can you trust? Let's try to understand these issues by studying the plumbing market.
Spanish companyRoca today is considered the largest producer of cast iron baths. The production of the plant is known throughout Europe and is in great demand in the post-Soviet space. The history of the company began more than a century ago. First, in a small plant near Barcelona, radiators were produced, then boilers were started, and in 1929 the first bath was made here. Despite the fact that the products enjoyed considerable demand in Spain, the manufacturer was not in a hurry to enter the international market. This happened only in 1990, and in 2006 Roca became the world leader in the production of sanitary ware and tiles.
Today the company includesmore than 70 enterpriseslocated in different parts of the world. Deliveries are madein 135 countries. On the territory of Russia, the company in 2004 began to build its own plant, which earned in 2006. Today, the manufacturer produces not only plumbing, but also tiles, furniture and fixtures.
Cast-iron baths of the company are distinguished by the highest quality and pleasant design. You can findboth fairly simple models and exquisite baths. All products are created on modern equipment using advanced technologies. The quality of the enamel is excellent. The manufacturer's baths receive anti-slip coating. Prices, both for products of such a high quality, acceptable, and constantly updated collections allow everyone to find a suitable product.
The history of thisFrench companybegins in 1889. Then its founders foresaw the growth of requirements to the level of hygiene. The production began with enamelled refractory ceramics. Things went well, and later several more factories went into the ownership of the company. Then the enterprise became part of a large French concern, and in 1986 it was bought out by the American concern Kohler Co. Nevertheless, cast-iron baths are still sold under the Jacob Delafon brand, and it was with this name that they became known all over the world the world.
Today, the company's products are synonymous with quality and exclusive design. For each product is provided25 years warranty. The range of baths is amazing: there are both fairly simple models, and asymmetrical bowls, whirlpool baths. They are worth, of course, not cheap, but fully work out the money spent on them. Special mention deserves designer models of unusual shape, on legs or with painting.
Spanish companyNovial began working in 1958 and specialized in cast iron. The first cast-iron baths were made here in 1967, and already in 1970 this became the main activity of the young company. Until 1991 the plant was located in Spain, but later the government decided to take out all the enterprises outside the cities. Then all production facilities moved to China. There is built a new modern factory, which is 100% consistent with all international standards. Today Novial cast-iron baths are successfully sold in 20 countries of the world, and the sales market is constantly expanding.
The manufacturer uses modernglassy titanium enamel and French oven equipment.Enamel is fired in infrared ovens, so there is no doubt about its quality and durability. The baths Novial25 years warranty, which is not surprising with this quality of production. In the sale there are fairly simple models,bath with hydromassageand exclusive design. Products are presented in different sizes, so that everyone can find a suitable model. Worth the product at the same time cheaper than many other European manufacturers, which ensures its popularity in the domestic market. All this makes it possible to call the Spanish company one of the best manufacturers of cast-iron baths.
ThisFrench companyhas almost a century of experience in the production of cast iron baths. During this time, our own traditions were formed, which explains such a high quality of the company's products. Production facilities are located in France. The manufacturer, despite the fashion to move production to China, decided to leave the plant in Europe, in order to exercise the strictest control over the production process.
The company uses the most modern technologies.Enamel is applied in a special way, creating an incredibly strong and resistant to negative environmental factors coverage. The white enamel on the bathrooms Oxame, it seems, even sparkles. In addition, the products are suppliedanti-slip coating, some models receive chrome handles, headrests and other elements that make the operation process more comfortable.
The manufacturer's range of bathtubs includes enough products that differ in size, shape and equipment. The price also varies considerably, but very simple models are not that expensive.
German companyspecializes mainly in the production of cast-iron bathtubs in retro style. The products of the manufacturer impress with appearance and are worthy to become an ornament of any bathroom. Models are produced in different colors, impressiveunusual shapes and openwork legs. The company also produces accessories suitable for such bathtubs.
Production facilities are in Germany, the production process at all its stages is strictly controlled. All products are covered with high-quality enamel, problems with which buyers will not have at least the next 30 years. The lineup is constantly updated with new products, but there are such baths, as you can guess, a lot.
Finnish companyIt gained fame due to the exceptional quality of the enamel coating of the bathtubs. Manufacturerputs it in 7 layers, the total thickness of the enamel reaches 3 mm.The protective coating perfectly resists shocks, mechanical damage and corrosion, facilitates the care of the bathroom and extends its service life. Externally, the baths are covered with a layer of primer that is resistant to moisture.
The assortment of cast iron baths Timo includes, basically, simple models without designer delights. Some baths receive pens and headrests. The bottom in almost all models has anti-slip notches, which make water procedures not only pleasant, but also safe. In terms of size, there is diversity, so you can choose a model for almost every room. However, the smallest baths 120-130 cm long are not produced here. Prices are very reasonable,manufacturer warranty - 5 years.
The Portuguese company RECOR Metalurgicahas long produced cast-iron bathtubs and shower trays. The products have proved themselves in a number of European countries, as well as in the domestic space. The company is distinguished by the use of special enamel with an increased content of titanium ions, which makes it possible to talk about the service life of such coatings in 70 years. Each bath is provided withpassport and warranty card. The warranty period here is significant- 25 years.
The lineup is often updated with new products. On sale you can find a bath that will be a wonderful addition to any style of the interior. Exclusive products on carved legs will complement the spacious bath in the classical style, and the baths with streamlined shapes will decorate the modern interior. The products of the manufacturer are expensive.
Italian companyCastalia produces quality, cute and relatively inexpensive baths. For coating usestitanium-containing enamel, the bowls are always ergonomically shaped. The manufacturer pays great attention to detail, so in terms of aesthetics, the bathtub is as good as in terms of convenience. The company produces models ranging in length from 120 to 180 cm, so it is not difficult to find a product with dimensions corresponding to the bathroom. Prices, we recall, are quite acceptable.
Cast-iron baths Artexmanufactured in China, but the plants use a unique Italian technology, Italian design and European equipment. This approach allows us to produce the best quality baths at the lowest possible prices, which has already been appreciated by numerous buyers.
The length of baths ranges from 120 to a record 200 cm, width - from 70 to 85 cm, depth - from 42 to 50 cm. Find a model that best matches the parameters of your home is not difficult. In terms of design, there is also diversity, but mostly simple models are produced, devoid of all kinds of delights.
Each product receivesseven-layer coating, containing silver oxide. It looks excellent, retains its original properties for a long time and allows water to be decontaminated.
Another one of the few responsibleChinese manufacturers. The company covers cast iron bathsthree layers of enamel containing titanium. Over the years, the coating does not turn yellow, it does not crack, but the baths themselves are very inexpensive. The combination of these qualities and provided products under the brand Goldman quite high popularity. Many models of the manufacturer receive an anti-slip coating, but it should be looked after as carefully as possible so that there are no dark spots. Experts advise when buying a Goldman bathtub to inspect the coating for integrity, and also to study the quality of the legs. If we compare the quality of these bathtubs and analogues of European production, then the Chinese models lose a little, but they are several times cheaper, and their service life is quite high.
JSC Plant Universal
Domestic producersready to compete with foreign products. Plant inNovokuznetskworks since 1961. This means that a good half of all Soviet cast-iron baths have disappeared from the conveyor of this manufacturer. Since then the plant has been upgraded many times. Today production linesequipped with high-quality German equipment, and the formation of baths occurs according to Japanese vacuum technology.
Each bath receivesthree-layer enamel coating, which provides products with a long service life. The model range is represented by products of different length, width and shape. There are bathtubs with a headrest and handles. White titanium enamel, thought out forms andlow price- these are the main factors that explain the popularity of the manufacturer's products. Baths are really expensive, and even with the most modest budget you will be able to afford a good product.
OJSC "Kirovsky Zavod"
Another bigdomestic enterprise, specializing in the production of cast iron baths. The history of the plant begins in the distant 1745. During this time the enterprise changed the scope of its activities several times. Today the plant is equipped with modern German equipment and produces quality cast-iron bathtubs, which are practically inferior to European counterparts and meet all domestic requirements.
All the baths produced at this plant receivecoating with patented enamel containing silver ions. The coating strikes with durability and disinfects water throughout the life of the bath.
The assortment of the manufacturer includes baths of different sizes, length from 120 to 170 cm. There are both maximally simple models, and baths equipped with handles, headrests andhydromassage. In terms of strength and durability, the plant's baths are highly appreciated. The manufacturer givesguarantee for their products 25 years, which says a lot. With the price policy here, too, everything is in order.