- How do they look, what are they made of?
- Do you need anti-vibration supports for the washing machine
- Causes of vibration of the washing machine
- How to install anti-vibration supports
Many people face the situation when the washing machine gives a knock or excessive vibration during operation. Especially in the moments of the centrifuge, its mobility sometimes scares. Immediately it should be noted that in most cases it is completely independent of the unit itself. That is, the quality of the technology itself has nothing to do with it. If the machine produces excessive noise, knocking and other annoying sounds during operation, this may be due to improper installation. If it is not possible to avoid vibration when it is properly installed, it may be the problem of the technology itself. Let's take a closer look at what is the cause and how to eliminate them with the help of special anti-vibration supports for the washing machine.
How do they look, what are they made of?
Anti-vibration feet are special supports, the main purpose of which is to soften and reduce vibration and sound that a washing machine can produce during operation. In appearance, these are four separate coasters made of polyurethane or rubber.
Mostly you can find kits of round or oblong shape. However, in the sale can be found coasters example in the form of legs. The main function is not different, only in appearance they have a different shape. For which they cost more.
In addition, practice the use of special rubber mats. This is just covered under the technique. From the reviews of consumers and experts, the most effective and popular way is ordinary rubber linings.
They can also be of different colors. This is due to the different colors of the technique itself. However, the most common are coasters of white and black. But, recently transparent coasters have gained popularity. They can be called universal, that fit the technique of any color. The main thing that should be understood is that parameters such as shape or color do not affect their main function.
Do you need anti-vibration supports for the washing machine
In each case, you should evaluate the situation as a whole to determine whether you need rubber feet for a washing machine.
It should be noted that they are not needed by default for a washing machine. In another case, they would be bundled with the purchase. The manufacturer makes every effort and designs the technique in such a way that there is no need for it. Therefore, often serviceable and high-quality equipment makes noise and vibrates for completely different reasons, for example, it is installed incorrectly. Therefore, first you need to check whether it is installed correctly.
Despite the manufacturer’s efforts, some models are still subject to excessive noise and tapping during operation. This applies to small-sized models that boast of their compactness and full functionality, however, because of this, there are also disadvantages. The narrow size of the technique are the cause of its lower resistance. It is usually based on weight weights, however, this does not solve the problem and both the manufacturer and the consumer know about it. There will actually be very relevant stands that will help reduce excessive noise and vibration during operation.
When it is important to take into account the requirements and recommendations of the manufacturer with regard to the use of various kinds of supports. For example, if your car is under warranty, then carefully read whether it is allowed to use stands. Often, service providers are denied warranty service if they have taken place.
Often the choice of such anti-vibration supports is made by the consumer himself due to the surface irregularities where the installation of the equipment is planned. And also, as a means against slipping, scratching the surface and the like.
The causes of the vibration of the washing machine
The equipment itself has a built-in ability to make noise. In addition to improper installation, there are other reasons for knocking the machine. Consider the most common of them, which arise these inconveniences.
- Shipping screws not loosened. Often, having forgotten, when installing to twist them, people encounter the problem of bouncing the machine. In the literal sense, while the machine is running, it just walks. Therefore, if this is the first installation, then make sure that everything is done correctly.
- Improper leg position. Frequent reason. Banal incorrectly set the height of the legs, is the cause of the oscillations of the machine during operation.
- Curved floor . This happens very often in old apartments and it is often a problem for the installation of modern overall household appliances.
- Parquet, wooden floor virtually predicts this problem, because the surface will be unstable.
- Old bearing. Often, in the process of long-term use of this piece of equipment corny wears out. In this connection, it generates excessive vibration. So here you just need to replace it.
How to install an anti-vibration stand
If you decide to use anti-vibration feet for a washing machine, you should perform the preparatory processes to start installation.
- To begin with, we note that the ideal place for a washing machine would be a flat and stable surface. Especially for this place often make a concrete screed.
- After selecting the location, connect the machine to the water supply. Correctly expose the hoses, etc. After installing anti-vibration supports, the machine will be almost stationary and it will be harder to do it all. Also connect to the mains.
- After connecting, level the height of the native legs. To do this, click on the machine itself and how to stir it up. You will immediately feel where it fits unevenly. We twist( expose) the legs at the right level.
- Next, install the stand. By the way, they are larger in diameter for the legs, so they fit there without any problems.
That's all the work. Now the machine is inviolable, and does not give out or at least noise and vibration will be reduced as much as possible during operation.
