How to clean a mink coat at home - 12 Proven Ways

1. Shake off the dust from the product.
2. Lay it on a flat surface.
3. Special brush comb the villi in the direction of growth.
4. Sprinkle the face of the starch.
5. Again comb.
6. Shake off balance and hang on the coat hanger.

Instead of starch, it is possible to use flour or baby powder.

1. Take special aerosol for cleaning fur (example pictured).
2. Shake mink product.
3. Shake aerosol.
4. Hang clothes on a hanger and spray means on the surface.
5. Soft brush comb villi:

• a long nap - in the direction of growth;
• short - against.

The tool can be purchased at specialty stores and massmarketa.

1. Take the contents of the 5 fish oil capsules and mix with 5 gr. soap.
2. Add to a mixture of 500 ml of boiling water and 10 drops of ammonia.
3. Process lint brush dipped in the solution.
4. Give fur dry.

1. Spread the product on a flat surface.
2. Top liberally sprinkle with semolina.
3. Rub a thick brush.
4. Leave for 15 minutes and shake off the remnants of cereals.

1. Take a thick soap solution or detergent.
2. With a brush dipped in means, rub spot.
3. Remove soap residue with a clean damp cloth.
4. Dry the coat on a hanger.

This method is good to brush the fur of tea stains, coffee and juice.

1. Apply on a cotton pad rubbing alcohol.
2. Rub the grease stain.
3. Comb the fur brush.

1. Take the sawdust of deciduous trees and soak in unleaded petrol.
2. Lay the fur coat on a flat surface.
3. Press sprinkle sawdust and fur.
4. Leave in this form as long as the chips do not dry out.
5. Remove dust and ventilate the coat.

1. Pour the contents of one bottle of hydrogen peroxide in the nebulizer.
2. Hang on coat hangers.
3. Spray the fur peroxide.
4. Leave to dry.

1. Spread the product on a flat surface.
2. Liberally sprinkle starch.
3. Leave for 10 minutes and brush off the residues.
4. Carefully comb out the pile brush.

1. Take 100 ml of the purified gasoline and add starch tablespoon spoon. Stir.
2. Apply gruel on the fur brush and leave to dry completely.
3. Shake off the remnants.

This method is not only cleanse the light hole, but it will return on a white background.

1. Spread the product on a flat surface.
2. Soak the sponge in a soap solution and rub contaminated areas on the lining.
3. Wipe with a clean cloth.

Keep it wet coat.

1. Moisten the hem.
2. Wait until it dries and start to clean special brush.
3. If the brush is not coping, sprinkle semolina fur and repeat all over again.