motoblockManipulation can be done either manually( using hoppers, hoes, etc.) or automatically( using a cultivator or motoblock).In this article we will talk about how to properly do hilling potatoes with the motoblock. Before proceeding with the story, we’ll dwell on the process of hilling the . How to spud potatoes?
Hilling potatoes - action is required. Its essence lies in powdering the stems of the bush with loosened earth. This is done to ensure that the roots received more oxygen. In addition, hilling allows to some extent get rid of weeds, protect the plant from sudden frosts and accelerate its development.
You may need to spend three hilling per season. We will tell about each of them in more detail:
- The first hilling of potatoes should be started when the plant reaches a height of 15 cm. Usually this period falls on the second or third decade of May.
During the first earthing up, it is imperative to remember that the layer of sprinkled soil should not exceed 10 cm. If this rule is not followed, it will be very difficult for the shoots to develop.
- The second hilling of potatoes should be done when the bushes reach a height of 20-25 cm. As a rule, this moment occurs 1-2 weeks after the first hilling.
- Not all gardeners spend the third and last hilling, but we recommend not to skip this step. The essence of the process is the same, however, this time it is necessary to sprinkle the stalks with earth as high as possible.
During hilling, attention should be paid to the condition of the soil. It should not be too dry or wet. Ideal - moderately moist land.
Hilling potatoes with the
motoblock The motoblock simplifies the hilling of potatoes by an order of magnitude. For example, a field of several dozen acres manually will turn out to pile up at best in a day. If you resort to the use of a motor-block, you can do this work in just a few hours. So, let's consider how to spud potatoes with a walk-behind tractor.
Read also: An excellent variety for Central Russia Potato Gala
Before you begin to talk about the process of hilling potatoes, let's talk about special designs, due to which soil loosening occurs. If someone has ever seen a walker, then he has already guessed that we are now talking about baking powder and hillers.
Read also: Features of growing broccoli cabbage
The elements are quite primitive, some experienced gardeners even manage to make hillers for potatoes with their own hands. In total, it is customary to distinguish two types of hillocks: a plow and a disk. Each differs from each other in some characteristics. We will tell about them now.
Hilling potatoes with a walk-behind tiller with an
plow-hardener To work with a plow-trowel, take care of setting the angle of attack and the depth at which the dive will take place. When this is done, you can get to work.
To do this, Hiller need a little deeper into the ground. In this position, it should be all throughout the hilling. If the construction during processing of potatoes is above the ground, it must be omitted. For this stand deflected back. If the opposite is true, the hiller is deeply immersed in the ground, then the stand must be deflected forward.
Hilling of potatoes by walk-behind tractor with disc hiller
To work with a disk variety of Hiller, you need to set two parameters. It is primarily about the distance between the disks. It directly depends on the variety of potatoes and is mainly 40-70 cm.
Read also: Making harvesting pumpkins for the winter
Then you need to remember to adjust the angle of attack( rotation).It must be the same for both disks Hiller.
Hilling process: how is
done? So, it's time to hilling potatoes with a walker. The first thing to do is put a few baking powder in front of the structure. Behind the hill will be located, which was discussed above. When all the necessary manipulations are made, you can proceed to processing. For this, the tiller is placed strictly in the center between the rows of potatoes and the minimum speed is activated. The process is running.
Spud potatoes to the end of the ridge, then the tiller is carefully turned and the following rows are processed in the same order. According to many experts in the field of gardening, spuding with a walker can be done only once. During the second treatment of the bushes, there is a high probability that the tubers themselves will be damaged.
If it is decided to spud potatoes with a walking tractor, then the “correct” planting of the seed should be taken care of in advance. Processing with this technique is possible only if the distance between the rows of plants is approximately 65-70 cm.
As you can see, spud potatoes with a walking tractor is very simple. If you learn the principle of work and begin to apply it in practice, the time saved can be spent on solving other important things.
Hilling potatoes with walker - video
