Washing Vacuum Cleaner: How to Use a Miracle Device

Washing Vacuum Cleaner: How to Use a Miracle Device


If you do not know how to use a vacuum cleaner, do not worry. Most models have a similar device, so you can easily figure out your miracle assistant. You just need to learn the main principles of the work of your model and buy the right detergent. And then it's up to the little one: to assemble the machine, to pour the water and forward - to the ideal cleanliness! And we will help you.


Principles and procedure of work

The operating principle of any detergent vacuum cleaner is very simple: clean water, in which a special agent is added, sprayed on the surface (the smaller the drop, the better), and then collected into the tank along with the debris and dust. After cleaning, carpets and upholstered furniture can remain moist, so they must be carefully dried. Some models manage to leave behind a very little moisture, so the floors dry very quickly.


All such appliances also have a dry-cleaning function when the dust is collected in a paper bag or in an aquafilter. Therefore, if you do not want to wash the floors today, it is not necessary to use all the possibilities of your miracle assistant.

instagram story viewer


The procedure for wet cleaning:

  1. Before using the detergent vacuum cleaner at home, make sure that your carpet or hard floor is not afraid of moisture and well tolerate household chemicals. To do this, in an inconspicuous corner of the room (for example, behind the sofa), pour a little water on the floor, adding to it the detergent that you are going to use. Rub the area with a clean rag. If it has traces of paint or the floor is deformed, you can not use a washing vacuum cleaner with this solution.
  2. Assemble your model according to the instructions.
  3. Add the correct amount of detergent to the water and pour the mixture into the tank.
  4. It is desirable to pre-soak a large stain in the solution for a quarter of an hour.
  5. If your product strongly foams, it is better to add to the tank for dirty water defoamer, otherwise excess foam can get into the turbine.
  6. Turn on the vacuum cleaner to the maximum power for your model.
  7. Start the wet cleaning from the far corner of the room. Spread the lines overlap to better wash the surface.
  8. After floor treatment with detergent, remove residues with clean water. To do this, pour warm water into the tub and repeat washing the surface.
  9. Walk a few times on the floor with a suction nozzle to dry the coating.
  10. Disassemble the device, wash all the parts and put them to dry.
  11. Thoroughly dry carpets or upholstered furniture. To do this, you can briefly open all the windows in the room.

It is advisable to use household chemicals of the same brand as your vacuum cleaner. So you can be sure that it is suitable for your model. For example, a special shampoo for carpets is included with the Zelmer vacuum cleaner.


But you can also use universal solutions, if you pre-test them on an inconspicuous part of the carpet.

Using a Zelmer washing vacuum cleaner

Consider the principles of the work of washing vacuum cleaners on the example of the brand Zelmer. To any model is usually an instruction in Russian, after studying which you can easily wash any surface.

Preparing the Zelmer vacuum cleaner for work:

  • Pour the required solution into the hole of the detergent container;
  • insert it into place;
  • Pour water into the container and insert it into the special hole;
  • connect one end of the flexible hose with the hole to the container, and the second with the suction pipe;
  • put a spray nozzle on the pipe (all the nozzles are in a special compartment on the body of the device);
  • The tip of the Zelmer liquid hose is connected to the suction pipe by means of special holders;
  • gently pull the cord by the plug and remove it.

Your Zelmer vacuum cleaner is ready for use. Now you can use it for wet cleaning:

  • insert the plug into the socket;
  • set the required power (by default, the average suction power will turn on, and three indicators will light);
  • turn on the Zelmer vacuum cleaner;
  • press the water supply button on the handle;
  • treat the desired surface several times.

Periodically change the water in the container. Work carefully so that the appliance does not turn over during cleaning.

If you constantly press and release the button on the Zelmer handle, you can adjust the supply of the cleaning solution to the sprayer. If you want the water to flow constantly, just press the button and move it slightly back. Try not to treat the same place for a long time, so as not to wet the base of the carpet.

After cleaning one section, change the nozzle of the vacuum cleaner to the suction brush and carefully dry the surface. Slide the brush back and forth until the carpet is dry. Then again change the nozzle and proceed to the new part of the carpet. After cleaning, disassemble the Zelmer vacuum cleaner and wash all its parts.

As you can see, in wet cleaning with a washing vacuum cleaner there is nothing difficult. Now you can always keep your apartment clean, using for this purpose all the strength and power of your new assistant.

Learning to use the epilator without pain: practical advice

Learning to use the epilator without pain: practical adviceHow To Use

Learning to use the epilator without pain: practical advice. .. . Epilator - an indispensable device for hair removal, which is in the arsenal of every second girl. But, unfortunately, not everyone...

Read More
How to use the puncher correctly and safely

How to use the puncher correctly and safelyHow To Use

How to use the puncher correctly and safely. .. . The puncher was invented in 1851 as a tool for the mining industry. In 1932, Bosch presented in Germany the first electromechanical percussion hamm...

Read More
Drill chuck - problems with replacement, repair and ways to solve them

Drill chuck - problems with replacement, repair and ways to solve themHow To Use

Drill chuck - problems with replacement, repair and ways to solve them. .. . In electric drills for reliable fixation of drills, a special device is used, which is called a chuck. In household dril...

Read More
Instagram story viewer