Westell washing machine: malfunctions, causes and error codes

Turkish Westell washing machines are popular among buyers due to the ratio of their affordable price and increased wear resistance. Despite this, you need to be prepared for various interruptions in the operation of the device, from the occurrence of which no one is safe. What are the malfunctions of washing machines of this brand and why do they arise?

Possible malfunctions

Specialists highlight a number of problems that most often arise with Westell washing machines. Among them:

1. Refusal to start the washing cycle.
2. Stop washing immediately after the start, work with frequent interruptions.
3. Low spin efficiency. The problem can become relevant only after some time of use: if the new device does not squeeze out well enough, it means it was incorrectly programmed.
4. Problems with the electronic display of the washing machine; situations when the device is “frozen” and does not respond to button presses.
instagram viewer
5. The appearance of a noise or whistle that is not characteristic of the device.
6. The washing machine draws water but does not start to wash. Also, this problem manifests itself when the washing machine periodically draws and drains water, but does not start the wash cycle.
7. The washing cycle goes well, but after the machine does not automatically remove water.
8. Problems closing and opening the hatch of the washing machine.
9. The washing time automatically changes. As a rule, with this problem, it increases.
10. The device may not pick up detergent or powder from the compartments. In this case, after washing, the compartment remains full.

Causes of Problems

Consider the most common problems, the causes of which are easy to neutralize on your own:

• The electronic control panel does not light when turned on. In this case, it is possible that you have problems with the outlet to which you are connecting the device. Test the socket using another device or a special tester, and if everything is in order with the socket, it is recommended to contact support.
• Vibration and spin noise. It can occur when foreign objects get into the inside of the device, but most often the problem is worn bearings or seals. Such a problem affects devices with a service life of more than 5 years. Vibration and noise can be caused by laundry, imbalance or defective shock absorbers. Also read the article: “Why does the washing machine buzz and make a loud noise while spinning, washing, and drawing water?»
• The machine does not squeeze the laundry and does not drain the water. In such a situation, the cause may be filter clogging. Moreover, such a problem can occur both naturally during prolonged use of the device, and unnatural if a foreign body gets inside. In addition, a drainage failure may occur, which also occurs due to wear. Similarly, this problem is described in the article: "Why doesn't the washing machine wring laundry?».
• The electronic module does not work. Most often this happens due to sudden voltage drops or as a result of a power outage. In addition, a problem may arise if the power units (for example, the heater) are broken in the Westell machine.
• The water in the machine does not heat up. The reason lies in the breakdown of the heating device - TENA. It can break due to scale, and also due to frequent use. You can solve the problem only by changing this item to a new one. You can read more on this topic. here.
• The drum does not rotate during washing. A number of problems of varying complexity can contribute to this: a worn belt or its break; breakdown of the control board; failure of the heater; motor overload. It is possible to solve the problem only by changing the outdated or broken part.
• Detergent compartment leaking. As a rule, leaks in the Vestel washing machine come from this particular compartment. This is explained by increased water pressure or clogged compartment with old dried powder.

Read also:

• LG washing machine malfunctions: Description of trouble codes and repair principles.
• Sumsung washing machine malfunctions (Samsung): codes, types of breakdowns, repair methods.
• Bosch washing machine malfunctions: codes, diagnostics, repair.

Error codes for the Westell washing machine

The Vestel washing machine has an electronic code notification on the error board. The machine, as a rule, reports on those errors that can be eliminated quite simply:

• E01. The hatch door is not closed tightly or not closed at all. Usually, such an error is additionally reported by a sound signal. To solve the problem, just open the hatch completely, check the lock and try to close it again.
• E02. A signal about insufficient water in the tank or its absence. Check hose integrity and water access. Also, such a problem may occur if the hose is clogged.
• E03. The occurrence of problems with the pump or pump filter. Check if your filter is clean and blow it if possible. If after this the problem is not resolved, it is recommended to contact customer service.
• E04. There is excess water in the drum. This problem should be solved automatically, that is, the device itself must drain the excess water.
• E05. Malfunctioning heating device or heat sensor. This can happen due to accumulated scale on these elements. Try cleaning the inside with descaling detergents.
• E06. A similar problem occurs with error code E08. In this case, one of the engine components has been damaged. An independent solution to this problem is impossible, so you need to contact the master.
• E07. Problems with the electronic control unit. It is also impossible to solve a similar problem at home.
• E09. Deficiency or excess of electric voltage in the network. The work will automatically return to normal when the voltage level stabilizes: it should be at least 150 and not more than 260 V.
• E10. Communication problems. In this case, it is recommended to limit the water supply and contact a specialist.

Vestel washing machine repair video tutorial

If you decide to repair the machine yourself, then it is most effective to use a master class. This is presented in the following video, where the specialist explains in detail how to remove the fasteners from the Westell washing machine:

To avoid problems, it is recommended that you operate the device correctly. Clean filters in time, use high-quality detergent and, if possible, organize washing periods at intervals of at least 1 week.