Washer Combustion: malfunctions, their diagnosis by error code

Practice has shown that even the most impeccable Combustion washing machines fail from time to time. In this case, it is very important to diagnose, identifying the specific cause of the breakdown. It is worth noting that in most cases, the malfunction can be eliminated independently or with the help of masters, without resorting to buying new equipment.

The washing machine does not drain the water

Among all the malfunctions of the Goryenie washing machine, the most common problem is the inability to drain the water. As with all machines, the products of this manufacturer use a special branched circuit that provides drainage of water.

The design has elements such as:

• Drain pump;
• Special branch pipes;
• Drain filter.

Quite often, problems of this kind are based on clogged nozzles; more rarely, it can be a clogged drain filter. Often there are such cases when in modern machines they wash clothes from the fluff. He often crawls out, and then simply accumulates in numerous nozzles.

Serious blockages can lead to quite complex problems, among which the failure of the pump for draining can be noted. The manufacturer provided this problem. The machine has openings that are designed for quick access to the drain system filter. So, it can be cleaned, and then the equipment will again work properly.

To avoid problems with this part of the washing machine, it is necessary to check the drain for clogging approximately once a month.

The machine makes a noise during washing

In the event of such a malfunction of the Gorenie washing machine, first of all, it is necessary to determine the general nature of the noise that appears. It can be emitted by a drum, and also the machine can simply tap a little in the process.

If a rattle is heard during washing, often this indicates that foreign objects have appeared in the tank of the machine. Once this factor is confirmed, they will need to be removed. Otherwise, items will damage the drum casing.

If the noise present is expressed by a simple tapping, and with each wash it becomes stronger, it suggests that the bearing assembly present in the construction is gradually coming to full unsuitability.

Neglect of this fact will necessarily lead to the fact that the drum eventually ceases to work. To avoid this outcome, it is necessary to replace the bearing. It is worth noting that its wear is a normal phenomenon that can be eliminated, and to ensure good operation of the washing machine for a long time.

The wear process for some brands of cars can occur quite quickly, for example, the equipment of the manufacturer Vyatka. Often this is due to the low quality of the installed structures made of their aluminum. In Combustion machines, this problem occurs with prolonged use - the average life of an equipment is on average 10 years.

The machine does not heat water

Among the common malfunctions, experts note that the washing machine ceases to maintain the required temperature and launches with cold water. That is, during washing, the water does not heat up.

To eliminate this problem, in most cases it is necessary to replace the heater. But far from always the problem may lie in this element of effective heating. For example, a situation often occurs when the washing mode does not change at all, but is carried out only using cold water. In this case, the malfunctions of the washing machines can be hidden in the breakdown of the temperature sensor, that is, in a thermostat or in a device that maintains the desired temperature.

Recommended reading:

• Faults in the Electrolux washing machine (Electrolux): error codes, correction methods.
• Bosch washing machine malfunctions: codes, diagnostics, repair.
• Sumsung washing machine malfunctions (Samsung): codes, types of breakdowns, repair methods.

How to diagnose a car breakdown?

The error can be determined not only by certain criteria, but also by a special service error code. It is from it that one can understand the main cause of a malfunction.

To determine what kind of malfunction occurred with the Gorenje washing machine, you can decrypt the code issued by the machine:

• F1 - short circuit or open circuit;
• F2 - the door is open or the control contact is not indicated at closing;
• F3 - even the first water level is not reached in the tank of the machine;
• F4 - there are no signals from the drive motor or the process of controlling the engine speed fails;
• F5 - there is no communication between the inverter and the controller;
• F6 - the water temperature for the specified time does not rise to the desired level;
• F7 - the water in the tank does not fall below the first level in the process of switching the drain mode;
• F8 - during the spin process, a very low drum rotation speed is noted;
• F9 - Water has accumulated in the washing machine tray.

Based on the conclusions made, one can judge whether it will be possible to fix the problem with improvised means or whether it will be necessary to contact a service center.

Tips for using the Gorenje machine

The best way to prevent unnecessary expenses for servicing the machine is to follow the basic rules of operation. Among the most important are:

• Use only quality detergents;
• Do not overload the drum with things;
• Do not operate the equipment in a room with a high level of humidity;
• Prevent foreign parts from entering the drum during washing.

Gorenje washing machine has one advantage - it independently controls the carrying out of a large number of functions during washing. If any problems are found, the technician gives an appropriate message - ERROR, which will be characterized by a special sound signal. So, a malfunction can be diagnosed by code. This will help to take the right steps to eliminate it.