DIY refrigerator installation in the kitchen: overall, built-in. Video.

Many owners are accustomed to mount household appliances on their own and connect it to the electric network, believing that there is nothing complicated in this matter. Although in practice it turns out that not everyone can ensure the perfect operation of the device. To understand the nuances of installing a refrigerator in the kitchen, it is worth reading the instructions and some useful tips that can facilitate the work.


  1. Where to install the refrigerator?
  2. Power supply
  3. Structural stability
  4. Video installation of the built-in refrigerator

Type of accommodation

Starting to install a refrigerator in the kitchen, you should think through all the nuances associated with this work in advance. First of all, first you need to decide what type of placement will be selected - a linear or angular option:

  1. Linear arrangement ideal when the kitchen space is spacious enough. In such a room, you can install in one line all the necessary household appliances, as well as a kitchen set. Installation of interior items and technical appliances is carried out along the wall. In this case, the refrigerator can be installed anywhere in such a straight line.
    instagram story viewer
  2. Angular arrangement it is preferable to choose when the kitchen is small. As a rule, for this, a separately located refrigerator is used, which is installed at the entrance to the room - near the sink. However, it is necessary to take into account the nuance that a certain distance must be present between zones with household appliances and a sink.
Kitchen fridge

For any of the above location options, you should follow certain rules. First of all, after delivering a new refrigerator to the room, you need to unpack it. To do this, remove all protective elements from the surface of the product, remove the unit from the pallet, and then transfer it to the installation site.

Where to install the refrigerator?

Before installing the refrigerator, please note that the area of ​​the kitchen, the minimum suitable for this, should be more than 5 m2, and the ceiling is located not lower than at a two-meter height.

The refrigerator can not be mounted near heating appliances and stoves - this can lead to its overheating and its failure. A compressor that provides cooling products inside the unit needs good ventilation.

It is not recommended to put the product near the window, as the sun's rays significantly increase the heating of the cooling grill, forcing the unit to work continuously.

Also, additional heating leads to damage to the paintwork and the gradual destruction of the skin.

Power supply

Particular attention should be paid to the issue of power supply to the device. Sometimes owners connect the equipment to decrepit extension cords having thin wires. Moreover, such “carryings” often simultaneously supply several devices with current, including a microwave oven and an electric kettle.

This is categorically unacceptable, because it is simply dangerous. It is required to provide the refrigerator with a modern outlet equipped with grounding. It is advisable to put a stabilizer between the outlet and the refrigerator, especially when the voltage in the house is unstable.

Useful articles in the topic:

  • Why is it buzzing and the noise of the refrigerator? What to do and how to reduce the noise with your own hands?
  • Refrigerator Noise Level: what should be the norm?
  • How to choose a refrigerator for the home? Which brand is better to buy:

Structural stability

According to the instructions that came with each refrigerator, it needs to be installed only on a flat floor. The product should not be able to stagger. To improve stability, the unit legs must be adjusted correctly.

Sustainability of the design of the refrigerator

Proper installation should ensure the horizontal top surface of the refrigerator and the vertical side of its plane. To adjust these parameters, all products have height-adjustable legs.

Important! You can not lean the refrigerator against the wall, you need to provide a small (5 cm) gap. It will help circulate air, contributing to better cooling of the unit, which constantly emits heat during operation.

Make yourself comfortable using the refrigerator by setting it so that the door opens conveniently. Traditionally, all models are available with doors that open from left to right. When a different type of swinging is necessary, you should immediately purchase a device adapted for hanging the door.

How to install a built-in refrigerator?

The method of mounting the built-in refrigerator in most cases depends on its size. Based on taste preferences, it is better to choose a model that easily hides under a furniture set. An equally popular option is a refrigerator with an open control panel. The second solution is more profitable, since the panel makes it possible to change the functioning parameters of the unit without opening the door of the refrigerator compartment.

Refrigerator doors need to be attached on rails to the facade of kitchen furniture. Then, when opening the cabinet, the refrigerator door will open, as if sliding along the facade. The opening of the refrigerator itself is limited by the opening angle of the facade hinge. They should be adjusted in advance, since subsequently the refrigerator will not allow this.

Installation of the built-in refrigerator

The unit itself is screwed to the cabinet with fasteners located above and below, as well as from the side. Due to the groove in the mounting brackets, you can slightly change the position of the refrigerator relative to the walls of the cabinet.

Important! For the compressor to function properly, good air circulation is required. The walls of the headset cannot be drowned out; instead of the rear surface, it is necessary to install a grill specially designed for the built-in refrigerator.

If you decide to mount the built-in refrigerator in your existing headset, consider not only its dimensions, but also all the dimensions of the existing doors. They are required to fit the doors of the headset.

The total cost of the built-in unit will be higher than usual, however, the compactness of the kitchen, obtained as a result, compensates for all costs.

Video installation of the built-in refrigerator

A detailed visual installation instruction for the built-in refrigerator is best demonstrated by this video. Even an inexperienced homeowner will be able to independently install the unit in the kitchen cabinet, carefully looking at the expert’s step-by-step recommendations:

To install a refrigerator in the kitchen, as well as not to spend too much space, many choose built-in models. If you install them correctly, then in operation there will be no difficulties. If space allows, it is possible to arrange an overall refrigerator in the kitchen, choosing the type of placement correctly and guaranteeing complete stability.

In contact with





LG Refrigerators: Top 7 best models, reviews, rating + Tips Before You Buy

LG Refrigerators: Top 7 best models, reviews, rating + Tips Before You BuyRefrigerators

When selecting equipment for storage of products it is necessary to pay attention to the model of the largest manufacturers from Korea.Modern refrigerator LG has great functionality, has many diffe...

Read More
Refrigerator without freezer: top 7 best models + pros and cons of such a decision

Refrigerator without freezer: top 7 best models + pros and cons of such a decisionRefrigerators

Compact refrigerator without a freezer compartment is suitable for cases where the number of small supplies, and it needs to be cooled without freezing. Such models bought by people fundamentally d...

Read More
Instagram story viewer