How to assemble a reliable extension cord for winter so that the wire does not harden

click fraud protection

Self-assembly of the extension cord is required when there is an urgent need for its use. This can be either unplanned repair work or a situation where a factory product is not able to withstand the load of an electrical device. Often, in the factory manufacture of extension cords, significant savings are made precisely on the cable section, which becomes the cause of all the ensuing problems during use. To exclude any consequences from a poor-quality device, it is recommended to independently assemble an extension cord that meets all the necessary parameters.

/

Before starting work, you must first collect all the constituent elements:

  1. Electric plug - you can buy a new one or remove it from an old unused or failed device. A prerequisite is the presence of grounding in it.
  2. Three-core cable of appropriate length. This element needs to be given special attention, since not every PVC coating is designed to work in winter conditions. Many modern cable manufacturers position their coating as resistant to frost and ultraviolet. However, it is better to play it safe and use a corrugated pipe to protect PVC. An alternative would be to use a cable whose insulation is made of polyethylene. This material is characterized by its ability to maintain elasticity at temperatures up to - 50 degrees Celsius. Section calculation is based on the planned load.
    instagram viewer
  3. Socket or block. Without fail, the device must be equipped with grounding and a closed rear wall. In order to use the assembled device in the winter season, it is recommended to make its body dustproof and waterproof.
/

Of the necessary tools for work, you will need: a multimeter, two types of screwdrivers, a knife, electrical tape and pliers.

/

After all the materials and tools are collected, you can safely get to work.

In conclusion, I would like to add that equipping the device with an additional switch in the form of a button can significantly increase its level of security.

The process of self-assembly of the extension cord does not require deep knowledge in working with electrical devices. It is important to select high-quality materials, as well as to pay due attention to the assembly of each element. Additional equipment with frost-resistant materials will make it possible to assemble the device more functional and reliable than the option purchased in the store.

  • The easiest ways to install an interior doorThe easiest ways to install an interior door
  • Reliable DIY glue for slateReliable DIY glue for slate
  • What is the best waterproofing of a bathroom under a tile?What is the best waterproofing of a bathroom under a tile?
  • How to create color music from LEDsHow to create color music from LEDs
  • How to cheaply insulate a metal garageHow to cheaply insulate a metal garage
  • How to reliably put the disc on the "grinder"How to reliably put the disc on the "grinder"
  • How to remove rust from corrugated board without damaging the paintHow to remove rust from corrugated board without damaging the paint
  • How to install the last rail of the rack ceilingHow to install the last rail of the rack ceiling
  • How to quickly cut thick porcelain tilesHow to quickly cut thick porcelain tiles
  • What to do if the column of the second floor is wider than the firstWhat to do if the column of the second floor is wider than the first
  • How to make a smooth crate of timberHow to make a smooth crate of timber
  • How to quietly glue two pieces of linoleumHow to quietly glue two pieces of linoleum

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
How to stick wallpaper on your own is no worse than an experienced master

How to stick wallpaper on your own is no worse than an experienced masterWith Your Own Hands

Content 1 Surface preparation 2 Pattern Fit 3 What to do with glue? In the process of repair at the moment, the most popular finishing material for the walls are wallpaper. But it is worth say...

Read More
How to make washable paper wallpapers yourself

How to make washable paper wallpapers yourselfWith Your Own Hands

Starting cosmetic repairs related to re-sticking wallpaper, many people want to do everything as quickly and inexpensively as possible. At the expense of savings, there is one very original soluti...

Read More
How to mount a ventilation facade yourself

How to mount a ventilation facade yourselfWith Your Own Hands

The hinged facade can not only give the building a neat appearance, but also significantly extend its service life. Any room equipped with a facade becomes much warmer, which greatly affects the g...

Read More
Instagram story viewer