How to make removable polycarbonate frames for a greenhouse

click fraud protection

The summer season is approaching, and many homeowners are thinking about building a greenhouse. In order for the construction to serve more than one year, it is better to make the segments removable. To do this, it is worth collecting the frames and glazing them with any convenient material. For greenhouses, monolithic or cellular polycarbonate is most popular. We will figure out how to make the structure durable, but at the same time easily removable, that is, how to assemble the frames.

/

Assembly steps

Before collecting frames, it is necessary to find out the size of the required segments. That is, suppose that the greenhouse is assembled from a metal corner or profile. It is necessary to measure the dimensions of the sectors. At the same time, the sites should not be made too large, this will complicate both the assembly and the installation and shooting process in the frame.

To assemble the frames, you can use wooden slats, which are sawn at an angle of 450 and glued together. In order for the connection to be strong, the corners are additionally twisted into self-tapping screws. You can also use furniture corners to fix a strict corner of the frame.

instagram viewer

After the frame is assembled to a given size, a polycarbonate sheet is cut out. Carefully refer to the direction of the material. When cutting, it is worth considering that from heating the polycarbonate will expand slightly, which means that the mount to the frame should be somewhat mobile. Here, it is understood that the diameter of the hole in the polycarbonate should be wider than the diameter of the self-tapping screw.

Polycarbonate is screwed to a wooden frame with screws. In this case, a rubber washer-seal should be laid between metal and plastic. This will increase the tightness and will not allow two moving materials: wood and plastic, to influence each other. On the back of the wooden frame, glue a rubber sealant around the entire perimeter (sold at any hardware store). Ready-made frames can be laid in the greenhouse sector.

Frame Lock

In order to keep the frames firmly in the metal corner, several fixation methods can be used: a mosquito net installation system, latches or self-tapping screws. Fixation with screws is more reliable, but will not allow you to quickly and easily remove a segment, which is often very important.

/
  • The optimal height of furniture in the apartmentThe optimal height of furniture in the apartment
  • What to do if the column of the second floor is wider than the firstWhat to do if the column of the second floor is wider than the first
  • Without which tool it will not work to make a hole in polycarbonateWithout which tool it will not work to make a hole in polycarbonate
  • How to cut a narrow strip of ceramic tileHow to cut a narrow strip of ceramic tile
  • What weld techniques are best avoidedWhat weld techniques are best avoided
  • How to arrange the supply ventilationHow to arrange the supply ventilation
  • Why you should not do dry cutting tilesWhy you should not do dry cutting tiles
  • How to cut a corner in a tile with a tile cutterHow to cut a corner in a tile with a tile cutter
  • How to install platbands on a door without nailsHow to install platbands on a door without nails
  • How to make a threshold for a countertop laminateHow to make a threshold for a countertop laminate
  • How to drill walls without dustHow to drill walls without dust
  • How to fill the leak on the roofHow to fill the leak on the roof

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
Why you can not put the sills on liquid nails

Why you can not put the sills on liquid nailsWith Your Own Hands

Home improvement is a fairly responsible matter. After all, the quality and reliability of the work will determine the final reliability and durability of the structure. And any mistake can make a...

Read More
Why fixed formwork is not suitable for building walls

Why fixed formwork is not suitable for building wallsWith Your Own Hands

Often, in the construction of a residential or industrial building, technologies are used that facilitate the construction process. These include fixed formwork. These are several plates made of c...

Read More
Why you should not do dry cutting tiles

Why you should not do dry cutting tilesWith Your Own Hands

When working with tiles, no matter which, its inevitable cutting. For this, there are special tools and technologies on which the quality of the cut, and, accordingly, the entire styling, depends....

Read More
Instagram story viewer