How to fix errors in installing a bathroom installation without breaking a wall

Recently, a hanging toilet has been of interest, since it looks neat, saves space in the room and facilitates care, which for many is considered an important factor. But in any case, any plumbing equipment, whatever its quality, breaks down and the problem needs to be solved, and immediately. Otherwise, there may be problems with the walls, they will collapse, and this will already lead to more extensive and costly repair work. The problem in most cases can be solved with one's own hand, but if there are no relevant skills, then it is better to resort to the help of specialists.

Classic installation failures

The toilet needs to be repaired urgently, since you cannot do without it, while if the faucet breaks down, then you can use a watering can a couple of days before replacing it. The life of suspended sanitary equipment is up to 12 years, but there are components that serve much less.

The built-in installation consists of several parts:

1. Frame or frame.
2. Cistern.
3. Water inlet and outlet.
4. Directly the bowl.

Verified manufacturers offer quality products made from reliable materials. From this and such a long life. But it is important to understand that all models have an allowable load, and, in order to save money, the buyer pays attention to the installation, where this figure is equal to only 100 kilograms. And even with a slight overload, the frame can easily crack.

How to identify a problem?

As mentioned above, if there is no knowledge and skills to work with the tool, then you can call plumbing, and a qualified specialist will diagnose the problem and fix it in the most concise deadlines.

If the work will be carried out with one's own hand, then the first step is to study the installation system. To do this, just study the manufacturer's instructions.

The most common problems usually occur with a tank:

1. Water continues to flow after flushing. Here the cause is often a blockage, and the problem can be solved by cleaning, it is not difficult to get the drain mechanism.
2. After pressing the flush button, the pressure is very weak. It is best to replace the accordion, that is, the drain mechanism.
3. No water is collected. There is already a problem in the float, it can simply jump off.

The valve does not block the water. There is already either a problem in the membrane or in the gasket.