After the erection of the roof structure, it is important to bind the overhangs. This is the final stage, which gives the roof a complete look. But here it is important to consider a number of factors, for a gable roof, it is necessary to provide elements for ventilation. Also do not forget about the drain. At the moment, the modern market offers a lot of materials that are affordable and at the same time durable.
Binder Features
After installing the rafters, you need to prepare directly for the filing of the overhangs. Be sure to do this you need to make a crate to facilitate the workflow.
Design features:
- Experienced builders recommend sawing off the end of the rafters so that one smooth line is obtained parallel to the wall of the house.
- Often a board is used for cladding and it is best that its width is the same, otherwise the design will not be the best.
- It is best to saw off the ends of the rafters vertically, and after that you can nail the first board, which will be a guide.
How to choose a binder material
Today there is an extensive selection of a wide variety of materials that can be used to file overhangs. Each option deserves special attention and it is best for the consumer to study the characteristics of each material. Having studied all the pros and cons, you can make a choice.
The most common materials:
- Decking. This is a galvanized steel sheet coated with a polymer compound to provide protection. A feature of the product is its durability, in addition there is a huge selection of colors. Galvanized steel provides strength and rigidity. And the operational characteristics of the material can cope with adverse environmental conditions. If the choice has fallen precisely in favor of a profile sheet, then it is best to pre-fabricate panels of the required width. Thus, the installation process can be greatly accelerated.
- Soffit. This is a plastic panel that is also often used for hemming. In appearance, the material resembles siding, but the thickness is greater. For ventilation, the manufacturer creates perforations on the surface of the spotlights. It is worth saying that in the process a special plastic is used, which is characterized by increased strength and resistance to ultraviolet.
- Wooden and PVC lining. Wood perfectly resists conditions of high humidity, and as for PVC, this is the cheapest option.
- Board. This material provides uniform air circulation.
-
Good design against hack work: how to recognize a quality project
-
How to equip a balcony for a study
-
Bedroom interior: basic rules
-
Beautiful designs of houses and cottages
-
How to make a rectangular cutout in ceramic tiles
-
Is it worth it to buy marble countertops or is it money down the drain
-
The most convenient ways to store plates that you use every day
-
Gypsum 3D panels for walls: advantages and disadvantages
-
How to store paint remaining after repair and what mistakes can be made
-
We create a beautiful facade with a terrace
-
What paint should not be washed
-
How to walk on corrugated board so as not to deform it
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
