Homemade budget heater from clay pots and candles

Anyone would probably like to get a source of heat, which not only never breaks, but also does not expend money. This may seem unrealistic to some, but there is such an option. Energy can be obtained from a candle using a heater made of a clay pot. No one usually has any difficulties with the creation of such a device.

/

The heating mechanism is based on the principle of nesting dolls. Ceramic pots of various sizes are held together with a metal rod. Many washers and nuts are strung on an iron base. Due to this, the device can transfer heat collected from the candle further. In a normal situation, a small flame creates a minimum of heat, all of it goes up. Ambient temperature does not change. The area of ​​the ceramic pot makes it possible to collect this heat and transfer it to the air.

/

It should be borne in mind that a metal base in such a heater can heat up very much. Do not touch it, as you can get burns. The functions of ceramics in this heater include not only the collection of heat, but also the retention of soot. D

instagram viewer
The diameter of the structure is approximately eighteen centimeters, the height is twenty-three centimeters. From a single candle, a home-made heater can work for about twenty hours.

/

The heater, which is based on candles, can be used in emergency situations. It is suitable for warming up a room if there is no electricity and heating. The general temperature in an apartment or house can be raised by several degrees if such mini-heaters are installed in all rooms. As a result, the main fuel can be saved. But at the same time, the candle heater, of course, will not be able to completely replace the heating system with itself.

/

To create a simple candle heater, you need three clay pots with different diameters, having a thread of about eleven centimeters of a metal base, about twenty washers and about eight nuts.

/

In the pots you will need to make holes corresponding to the diameter of the main rod. It is necessary to begin assembling the device from the largest pot. The pots should be fixed with the help of nuts and washers, several washers are fastened in between at once. An upper knob is mounted above the candles. An open flame should be placed under the rod.

Home-made candle heaters managed to gain quite a lot of popularity in America. Practical Americans appreciated the cost-effectiveness and simplicity of such a device.

/
/
/
  • A quick way to install postsA quick way to install posts
  • Decorative crafts for the house from old clothesDecorative crafts for the house from old clothes
  • Is it possible to repair a torn hinge from a doorIs it possible to repair a torn hinge from a door
  • Is it realistic to cut glass with a grinderIs it realistic to cut glass with a grinder
  • Creative wall organizers - basic ideasCreative wall organizers - basic ideas
  • Tiled countertop: how to make it right?Tiled countertop: how to make it right?
  • How to make a fanless fanHow to make a fanless fan
  • What wine corks can do: creative decor solutionsWhat wine corks can do: creative decor solutions
  • Creative crafts for homeCreative crafts for home
  • Do-it-yourself ways to make stained glassDo-it-yourself ways to make stained glass
  • Homemade bolt and 2 nuts, which amazes with its geniusHomemade bolt and 2 nuts, which amazes with its genius
  • How to make a drywall fireplace with your own handsHow to make a drywall fireplace with your own hands

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
Simple secrets of dressing fox skins at home

Simple secrets of dressing fox skins at homeWith Your Own Hands

Contents of the article: Preparing the skins for the dressing process The main operations of the local forces are the foundations of the local forces and the .Gentlemen we...

Read More
Everything is easy and simple - a smokehouse from a gas cylinder

Everything is easy and simple - a smokehouse from a gas cylinderWith Your Own Hands

The content of the article: ;- economy version of complex and expensive equipment for smoking a product. To make such a construction, you will need both a Bulgarian and a welding ...

Read More
Make your own wood splitter simply and economically

Make your own wood splitter simply and economicallyWith Your Own Hands

Article content: device classificationThe attractiveness of the tool is expressed in the fact that any person can make a screw-splitter on its own from inexpensive materials....

Read More