Micatermic heater that is: the principle of operation, the device, and the instrument.

Currently, the market is represented by a wide variety of heaters that run from the mains. And one of the most striking innovations recently became Micatermic heater that manufacturers are positioning as an infrared heat source. What are the features of this device and what criteria need to pay attention when buying?

What is Micatermic heater

This is a relatively new units, recently appeared in the domestic market. They are made based on new technical developments. The manufacture of such devices were able to learn not only foreign but also Russian companies, whose products are rapidly gaining popularity, and gradually approaching the leading positions.

Principle of operation

Any of modern heaters powered by an electrical network, increase the air temperature inside the room. In other words, the principle of operation of such devices is as follows: air molecules heated, after which mixing takes place with cold molecules, and starts to warm the area.

But as mentioned above, based on the presentation device variants based on the principle of IR units, and accordingly their work is based on infrared radiation. For optimum temperature performance of these devices in the apartment begin to emit infrared waves, heating the objects, and those further transfer heat and increase the temperature readings.

Device

Role of the heat source in the presented models performs plate rationally issuing infrared rays. But she is not heated, and thus the consumer will not burn his hand when touching it.

The plate includes a plurality of layers, each of which is coated mica. This means that the design of the device does not include a heat transfer fluid. And accordingly, the owners Micatermic Heaters not face burnout spiral.

The plates are arranged in the housing, which is used for manufacturing high quality metal. On both sides of it are arranged grid. They do not prevent the penetration of light. Since the heater 2 includes such a grid, the heat comes on two sides. More advanced models feature two additional layers, one of which reflects and concentrates the heat another. That is why the warm flows are directed in the same direction. These models are designed to be mounted on the walls of the room.

pros devices

In addition, owners will delight Micatermic heaters near tangible advantages, which include such as:

• apparatus does not need time to self-heating, due to which it immediately gives heat to the flat;
• compact dimensions and low weight;
• optimal power consumption compared with other heaters;
• no noise at work.

The correct use of the instrument

Safety in the operation of household appliances is paramount. Basically precautions when using the unit represented by little will be different with the measures applicable to such equipment. Following the acquisition Micatermic Heaters need to follow the rules listed below:

1. Use the unit must be in accordance with the enclosed instructions.
2. Do not connect to the network device, if it appears damaged casing or power cord.
3. Do not allow contact of the device with an open moisture.
4. The power cord must always be visible.
5. The distance between the appliance and inflammable items (furniture, books, blinds, curtains, and so on. D.) Should be at least 1 meter.
6. Do not dry on a hot clothes and other things.
7. Do not direct the machine towards the objects are deformed under the influence of high temperatures.
8. It is necessary to eliminate debris from entering the device and other loose, causing the circuit wiring, and as a consequence of failure of the device.
9. On a regular basis it is recommended to wipe the dust from the heater, and best of all, clean it with a vacuum cleaner. This will require the device to disconnect from the mains and wait for it to cool down completely.
10. It can not be used to clean a variety of body chemistry and abrasives. So can damage the paint, which further cause corrosion.
11. Do not cover with a cloth body, t. To. This may cause a fire.
12. Also strictly forbidden to try to disassemble the unit, and perform repair handedly. In the event of a fault, you should contact the warranty service, and at the end of his life - in the specialized services on home appliances repair.

Exclusively subject to the rules of your designated Micatermic Heaters serve for a long time, and as a consequence you will enjoy optimum air temperature in a room at a regular basis.

How to care for Micatermic Heaters

When you go to the store and the checkout process is already at hand, do not forget to ask the consultant about the peculiarities of care purchased the heater. Simple instructions are not always include such information. In addition, interest in such information - it is the legitimate right of any consumer.

If the information you need to find out is still not possible, stick to the guidelines, which will be presented below:

1. The optimum temperature of the device may be called index - 25 degrees. With increasing temperature this will greatly increase the level of power consumption.
2. Before turning on the device it is necessary to make sure that the apartment on the glasses there are no damages. For example, a crack in the window, or broken glass. If any, the device operation is unlikely to bring the desired results.
3. If the apartment floor heating, to prevent all kinds of faults with the wiring it is recommended to install a power stabilizer.

Furthermore, we should not forget the basic rules purification device from dirt and dust. Before you start you need to de-energize the system and give it time to cool down completely. You will then need to take a slightly damp cloth and remove any dust on the body.

IMPORTANT! should not be allowed to get wet, so.. This may lead to its failure and costly repairs!

If there are small holes, take a vacuum cleaner and clean with the help of remote areas on the device.

ATTENTION! Auxiliary detergent use is strictly prohibited!

What to look for during the selection process

To choose a quality Micatermic heater, you need to understand its features. As mentioned above, the device wafer covered mica. This material does not emit harmful gases when the heating temperature to 1100 degrees.

But why manufacturers give preference to this material? Everything is simple:

1. Mica - natural insulator which does not conduct current, it does not absorb moisture and is extremely durable material.
2. Mica coated plates will get rid of the instruments typical cod in the process.
3. On the surface of the coated mica is not burnt dust.

Micatermic heaters immediately after the connection to work as hard. In view of the above, for a typical apartment unit with sufficient strength is not more than 1500 watts. It is recommended to pay attention to the presence of the thermostat. If it is not, then the activation and deactivation of the appliance is required to produce in a handheld unit.

In addition, it is recommended to consider the place where the device is located. On the market are many models with different types of fasteners. They can be mounted on the ceiling, walls, built into the furniture or simply stand on the floor.

Also, it is recommended to take an interest and the available modes. More recent models have a lot of functionality, and can independently change the operating mode, without human intervention.