Induction Cooker as a heater: Is it possible to heat the apartment with the help of the plate?

With the continuous growth in electricity prices is necessary to find creative ways of heating private houses, villas and other facilities. Because of its availability and reliability become increasingly popular use of induction cooker as a heater. Heating cooker at home - as much as economically and efficiently?

How does an induction cooker

Induction Cooker runs completely on a different principle, unlike other devices of similar purpose. Instead of heating elements used in the manufacture of electromagnetic coils. They under the action of alternating current form itself around the magnetic field. Under the surface of products situated on a coil current is at a frequency of 20-60 Hz.

It serves as the primary winding, and pots and pans - the secondary. The bottom of the dish fall induction currents, and it is heated. Therefore heat and being in her food. It is worth noting that during the heating of heat loss is minimized. Tableware heats up much faster than in other types of cooking products.

ATTENTION! The back plate during operation hardly exposed to heat. All energy flux is distributed only on the heating utensils.

Can the stove to heat the room?

Of course, you can put on the surface of the pot with water. In the process of boiling it will heat the room air. However, this method is not rational because of the boiling liquid. Using an induction heater plate make himself. It's enough to have the skills to work with welding machine and grinder. Consider the process of manufacturing this design stages:

• To begin follow make square pipe measuring 50 * 50 cm. Such products will need about 6 pieces. It depends on the size of the induction plate.
• It is also necessary to prepare two pieces of length 25 and 30 cm.
• 50 cm elements. connected with each other vertically. All joints should be carefully boil.
• The other two blanks need to remove one of the parties to get the profile of U-shaped.
• To the resulting parts into an upper and a lower side of the segment is welded with two remote wall to combine all of the sections in a common circuit.
• Then brew holes of the side portions.
• The discharge and incoming connections must be located on a diagonal one upstairs and the other below.
• All joints must be thoroughly cleaned grinder. The resulting article is degreased before painting.
• Next, begin the installation process. Bottom fed coolant return current, and top - extending pipe.
• In this system be sure to add the expansion tank and pump for forced circulation.

Proceeding in the resulting product, the water warms. Similarly, the same structure can be performed in the horizontal and complicate its embodiment.

IMPORTANT! Induction hob must have the strength adjustment system current and temperature.

Is effective whether the induction cooker to heat?

There are many different opinions about the effectiveness of the use of this product. One of the disadvantages of induction cookers is their high cost in comparison with other devices. The essential advantages of its application are as follows:

• High efficiency, reaching 98% in some cases. To compare the efficiency of heating the ceramic surface- 50-60%, gas cookers - 50-65%.
• Characterized by high wear resistance and durability. In continuous operation, these products are able to serve at least 25 years. A significant reduction in heating costs up to 30%.
• Lack of scale deposits.
• Increased degree in Electrical and pozharobezpasnosti.

REFERENCE! The truth is a prerequisite of preserving longevity is its use in the recommended temperature range, but is responsible for this already automatic.

Owners using induction cookers for heating, celebrate their quietness, durability and high performance. However, having no experience of creating electrical equipment, not better to experiment and use the services of professionals. After applying an induction heater plate as it is connected not directly but through the charger, the battery and the inverter.