Can I wash under the tap completely multivarku: what to do with the very dirty?

Multivarka has long been one of the favorite and most reliable kitchen appliances. Mlegged users are wondering how to clean it properly and whether it is possible to wash under the tap fully. After all, during the preparation of food in the appliance collects grease and food residues.

Why can not wash multivarku under the tap?

Cleaning wipes and sponges rather long and laborious process. Much faster, at first glance, to deal with that washing under running water. However, this can not be done. This appliances is a complex device.

Important! Inside the case is hidden heating element, and a lot of chipsBy which programs are installed. Electric part is protected against the penetration of liquid special cup in which are placed food and water. Moisture entering the multivarku may be the cause of the short circuit and damage the contacts.

If water enters, the device should immediately flipped upside down to prevent water

glass. It should dry naturally for a few hours. Lower multivarku under running water - is the same as the wash under the tap cell phone or hair dryer.

Attention! Water entering into the housing can bring the device out of operation.

How should I wash multivarku?

Wash multivarku better only after the device has cooled down after cooking. It is necessary to remove the cup and the steam valve, detach the cover.

Then proceed in the following sequence:

• Rinse the bowl under the tap using a special detergent and a soft sponge. For Teflon coating can not use abrasives. You can fill the capacity of the foaming solution and leave it for 20 minutes to soak.
• Rinse under vapor tap valve.
• Quick release cover read the instructions carefully. Rinse the cover with detergent or soda. It removes unpleasant smell good wiping the surface with a solution of vinegar.
• From under the bowl, remove the crumbs and leftovers with a soft sponge. Apply and leave for a couple of minutes by means of a deposit. Wipe the surface with a damp and then a dry cloth.
• The outer part of the device can be wiped with tissue or detergents.
• Using the appliance can continue, when it is completely dry.

Important! Before you clean multivarku, make sure the appliance is unplugged.

What to do with a strong pollution?

Multivarku, as well as all electrical appliances under the tap Do not wash. However, if the favorite gadget is very dirty, the for cleaning it is necessary to remove the electronic component. After that, the details can be soaked in detergent and wash under running water.

Reference! If multivarku included in the network immediately after washing, a short circuit can occur.

Washing unit under a jet of water will cause damage to the contacts, and in most cases further use is impossible. Timely care after each cooking helps to preserve multivarku clean.