How to spoil a floor screed

Various Internet resources contain a lot of information on how to make a floor screed in a room of any type. Examples of various methods, methods and materials are given. Experts share their opinions regarding the shortcomings of certain technologies, give recommendations and advice.

It’s hard enough to find information that would concern what sloppy handling is capable of to destroy the previously achieved result, how to prevent the formation of cracks and prevent the material collapse.

The very first rule, compliance with which will not allow to spoil the screed, is covering the surface with plastic wrap. A thickness of 200 microns will be sufficient. This will allow moisture to evaporate evenly. Indeed, in most cases, it is rapid weathering that causes cracks to form. In order to remove excess condensate, in a few days you can remove the cover for ventilation and return it to its place. This procedure can be repeated several times with an interval of 5-7 days. Before laying the flooring directly, the film can be removed in a couple of weeks.

If other repairs are due after the floor, then there is a chance to spoil the screed by dropping it with a heavy construction tool or material. The screed does not have a protective coating, so it is easy to wash and is subject to the formation of chips. In order to avoid negative consequences, it is recommended to cover the floor with thick cardboard or plywood.

Builders often suggest screeding on a previously installed “warm floor” system. A quick start of the system can adversely affect the prepared floor. It is recommended to start it no earlier than a month after filling the floor, at the same time at low temperature conditions. Gradually, the temperature can be increased with a frequency of 5 degrees per day.

The preparation of floor screed, although it is not the most difficult procedure, nevertheless requires the observance of certain measures. The best solution is to fill it after all the hard work done, such as replacing windows, installing communications or installing plumbing. If you take the prepared screed lightly and allow for a plentiful exposure to drafts and other negative factors, the floor is more likely to become unusable. This will require not only additional efforts, but also extra financial expenses.