Home »Maintenance of household appliances »How to properly clean the computer keyboard
How to properly clean the computer keyboard
Today, the computer plays the most important role in the lives of almost everyone, so even the slightest problem with it or just its unpresentable appearance can spoil the mood of its owner. The keyboard belongs to very important elements of this device, followed closely, so the problem of how to clean the computer keyboard is familiar to many. On the keys there are always traces of fingers, dust settles, coffee regularly pours out on them. All this leads to the need to clean this element. Otherwise, it will look unpresentable and quickly fail.
Prevention
In order not to think how to properly clean the keyboard, experts recommend taking care of this item regularly. For this it is sufficient:
- Disconnect (disconnect) the device;
- turn it over, knock a little on the bottom panel. This will allow the crumbs, dirt particles and even small items to get through. In general, the content can really surprise; which could get inside during operation;
- using a hair dryer (cold mode) you need to blow out all the keys, which will blow out the dust that is located inside. Also, for these purposes, a vacuum cleaner equipped with a flat nozzle is suitable;
- by means of a soft cloth, or, better, brushes, it is necessary to sweep out the accumulated garbage;
- at the last stage you can wipe the keyboard with special alcohol napkins.
This prophylaxis is recommended to be performed two to three times a month. It can be carried out without disassembling the device. The process itself is recommended to be carried out using a variety of auxiliary materials that allow you to clean the keyboard as quickly and correctly as possible. This includes special napkins, cyberlizuns, USB-vacuums and cans with compressed air.
.
General cleaning of the keyboard
As practice shows, even regular preventative measures for cleaning the keyboard, does not allow maintaining its perfect purity. Sooner or later, there is a need to disassemble the device for cleaning inside. To do this, you will need a screwdriver, a cotton swab, a towel, a toothbrush and a water tank.
.To properly clean the keyboard, you need to wrap the tip of the screwdriver with an electrical tape and press the key of the keyboard as gently as possible. To pull the key out of the groove, it is necessary to apply very little effort. Particular attention deserve the keys Space (space), Shift, Enter. They will be strengthened by special iron staples. When installing them back, first the bracket enters the groove of the button itself, and only then into the groove of the base. Only after this, the button can be pressed to insert into the base.
.After removing the buttons from the keyboard, they need to be placed in a jar, where non-hot water has been prepared with the addition of soap. The contents of the jar should be shaken well and left for half an hour to settle. After this time, the contents should be shaken again and rinsed thoroughly with clean water. Also, a common way to clean the buttons is to place them in a washing machine. After these procedures, the buttons must be thoroughly dried. For this, they can be laid out on a pre-prepared towel and dried with a hairdryer.
In addition to cleansing the keys, this process is subject to the entire keyboard. This can be done with the help of cotton buds, a damp cloth and a toothbrush. These items will help bring the base of the keyboard to shine. After that, the buttons are inserted back.
.
