How to remove a dispenser from a bottle, simple ways

The dispenser, installed in glass bottles with alcoholic beverages, allows you to accurately fill glasses and glasses without spilling and measuring out the right amount of liquid. When the booze runs out, the container is usually thrown away. But some zealous owners leave beautiful glass products for later use. For example, to fill a bottle with a homemade drink, you have to remove the cap, and there are several ways to do this.

How to remove a dispenser from a bottle of vodka

Some people have learned to pour liquid even through the narrow opening in the plug. But this is a delicate job that can end up spilling alcohol on the table. It is much more convenient to remove the plastic plug and pour in the contents without interference.

In some cases, with careful removal of the element, it will be possible to reinstall it and reuse it.

Boiling water option

If the cork protrudes over the neck of the bottle and you can grab onto it with your fingers, we recommend using a saucepan of boiling water. To do this, pour water into a container and set it on fire. We wait for the moment when it practically boils and lower the bottle with the neck down into the hot liquid.

In order for the plastic plug to soften under the influence of high temperatures, you need to hold the glass product in this position for some time. Then, without waiting for cooling, the cork is quickly removed by grasping it with your fingers. You can pre-wrap it with a towel so as not to burn yourself and to hold it more comfortably.

It is noteworthy that this method makes it possible to reuse the dispenser. After filling the bottle, it is inserted into place and used for its intended purpose. However, over time, when exposed to boiling water, it will lose its properties.

With a hook

Imported bottles and some domestically produced beverages are packaged with dispensers installed deep in the neck. In this case, you cannot pick it up with your fingers - you will have to use another method:

1. Let's prepare a sturdy small metal hook.
2. Fill the heating pad with hot water and wrap the neck of the container with it.
3. We hold the entire structure with a towel.
4. After five minutes, when the plug becomes softer from the effects of temperature, we quickly hook it up with a hook and remove it with force.

The method is simple to implement. But it will take some effort. It will most likely be possible to use the plug the second time.

Knife method

Another option, after which the dispenser is sent to the scrap, as it is not suitable for further use. This usually happens with imported alcohol, where the plug sits so tightly that it becomes impossible to remove it without drastic measures.

To do this, take a sharp knife and simply cut the lid inside the neck. Then you have to remove the rest of the cork and send it to the trash can. It is no longer suitable for use.

The presence of a certain skill and a minimum number of tools makes it possible to quickly remove the dispenser from the vodka bottle. If there is no other option, just cut open the lid and remove small pieces.