One of the main household appliances in the kitchen is the oven. Meat and fish are fried here, and confectionery is baked here. Fat, sugar and butter remain on the baking sheet after such products. After a while, these particles become coarse, eaten into the material, and it is very difficult to wash them off. With the right approach, the dishes can be washed at home, but you need to choose the right product. Next, we will learn how to clean the baking sheet from carbon deposits using simple improvised substances.
Nuances of cleaning metal products
Most ovens use stainless or aluminum baking trays. It is not difficult to take care of such products, the material does not deteriorate under the influence of chemical compounds and abrasives.
Attention! Earned on our website kitchen designer. You can familiarize yourself with it and design your dream kitchen for free! May also come in handy wardrobes designer.
Before you wash the baking sheet from carbon deposits, it is recommended to clean the remnants of food from it with a wooden spatula. After that, pour heated water up to the upper level and add a few drops of detergent. In this state, the products are left for 2 hours, then the dirty liquid is drained and the surface is washed. Any remaining dirt can be wiped off with a kitchen sponge. If that doesn't work, use abrasive particles such as sand, baking soda, or salt.
Folk remedies
Not every housewife knows how to clean a baking sheet from carbon deposits with folk remedies. Consider a method using coarse table salt.
Annealing with salt
The workflow follows the following algorithm:
- Pour and level a small layer of salt (up to 1 centimeter) on a baking sheet.
- We turn on the oven, set the temperature to 100 degrees. When the household appliance warms up, set the dishes for 30-40 minutes.
- After changing the color of the crystals, turn off the oven.
- We wait until the metal cools down, rinse the baking sheet with water.
The stains remaining after cleaning are wiped with a sponge and salt. These particles should easily come off the surface.
Using baking soda and vinegar
A solution of these substances can be used to clean any surfaces. Next, we will learn how to clean the baking sheet of burnt fat using vinegar and soda powder:
- dilute 10 grams of soda and 10 milliliters of vinegar in water, add the same amount of detergent;
- the prepared solution is poured into a bowl;
- put the baking sheet in the oven, turn on the device, set the temperature to 100 degrees;
- we keep the product for 25-30 minutes;
- take out the sheet and let it cool;
- thoroughly wash the dishes in warm water.
As a result of the influence of the ingredients in question, you can clean not only the baking sheet, but also the inside of the oven. During warming up, part of the fumes will settle on the inner surfaces of the equipment, which will quickly cope with greasy stains and stubborn dirt.
Hydrogen peroxide solution with soda
Now let's find out how to clean an aluminum baking sheet from carbon deposits when using hydrogen peroxide with the addition of soda:
- pour half a glass of soda into a small deep container and mix this ingredient with hydrogen peroxide until a paste is obtained;
- evenly distribute the gruel over the inner surfaces of the product;
- leave the composition to brew for 20-30 minutes, then rinse it off with water.
You can clean the dishes using pure hydrogen peroxide. The liquid from two bottles of this substance is poured into a small metal container, put on fire, the liquid is waiting for the boil. The hot solution is left in a baking sheet until it cools, then drained and the surface is cleaned with a sponge.
Soda and dish detergents
Before you wash a burnt baking sheet, you need to decide on a suitable tool. A good effect can be achieved by using a detergent with the addition of baking soda. To clean the product, a lot of dirt will need a large dish into which you can put the sheets, for example, a bowl, boil or a saucepan.
sequence of works:
- we lay the baking sheet in such a way that it is completely covered with water;
- pour 10 grams of soda ash into the liquid;
- add 10-15 milliliters of detergent;
- bring water to a boil and boil for 30 minutes;
- we wait for the liquid to cool, wash off the remnants of contamination.
Loose fats will be well washed off, persistent carbon deposits are peeled off with a hard kitchen sponge.
Drink use
Coca Cola, Fanta and Sprite perfectly eat away fat and other stubborn dirt due to the content of phosphoric acid in the composition. Not everyone knows how to use soda to remove old fat from a baking sheet, but it’s quite simple to do. The selected drink is poured into a bowl and left to sour for several hours. Boiling the drink in a baking sheet in the oven for 10-15 minutes will help save time. At the final stage of work, the sheet is cleaned of dirt under running water.
Ammonia
A cheap medicine, ammonia allows you to quickly deal with stubborn dirt. This solution has a specific smell, so work is carried out in a ventilated area.
Pour a little solution on the bottom of the dish and spread it evenly over the surface with a sponge. We place the sheet in the oven for 12 hours, while the oven door must remain closed. Such work is carried out at night. In the morning, the remains of carbon deposits are washed off with heated water. Now we know how to wash the baking sheet from carbon deposits, then we will deal with the nuances of cleaning products made of fragile materials.
Glass Tray Cleaners
Molds made of ceramics and glass, as well as products covered with enamel, must be cleaned of contamination using gentle agents that do not contain abrasive particles. Consider options for how to wash a glass baking sheet:
- We soak the product in water and detergent, leave it for 2-3 hours, and then rinse the dishes under the pressure of clean water.
- Pour mustard powder on the bottom of the baking sheet and fill the product with water, leave it overnight. In the morning, we thoroughly wipe the dishes with a kitchen sponge with applied gel.
- Baking powder can be used as a cleaning agent. The powder is poured onto the bottom of the dishes, sprinkled with water. After half an hour, the surfaces are washed with heated water.
- Mix salt, baking soda and water in a 1: 3: 1 ratio. Apply the paste to the lower part of the sheet and leave to sour for 10-12 hours (it is advisable to carry out such operations in the evening, at night). In the morning, the dishes are washed with heated water.
Ceramic and glass products can be cleaned well when exposed to various chemicals, but they show little resistance to abrasives. To prevent contamination during baking, spread parchment paper on the bottom of the dishes.
Conclusion
It is better to wash baking trays and other kitchen utensils from dirt and stubborn joints immediately after cooking, but not every housewife has such an opportunity, especially when she is preparing for the arrival of guests. In the absence of time, remove deposits with a napkin and fill the product with hot water and detergent. An alternative is the use of parchment paper.
