Compressor for painting a house: choose a model for price and quality - Setafi

click fraud protection

In recent years, there has been a trend towards the purchase of compressors. No garage workshop is complete without its own compressor. In this article, we have prepared for you a rating of the best compressor models for the home in 2022.

Read on - top 4 compressors for a garage workshop.

Screenshot 2022-04-05 at 11.49.51

The content of the article

  • ELITECH KPM 200/50
  • Aurora GALE-50
  • Denzel PC 3/100-504
  • Fubag Wood Master Kit

ELITECH KPM 200/50

ELITECH Classic 50 Liter Electric Garage Compressor ranks #1 in Home/Garage Compressor Ranking. The device is inexpensive, easy to use, can work in extreme conditions - low temperatures, low voltage, dusty air. Minimum voltage to start 200 volts. Power 1.5 kilowatts. The drive is direct - the torque from the engine is immediately transmitted to the working unit. But if you want the device to last longer, install a stabilizer. The declared capacity is 130 liters per minute. In the reviews, users write that the indicator does not match - it is higher. The actual output is about 198 liters per minute. It is distinguished by endurance, reliability, build quality and an affordable price of 6.6 thousand rubles.

instagram viewer

Advantages:

  • Enclosure with protective cover
  • Mobile
  • Supplied with rubber wheels
  • Hardy, unpretentious - works in difficult conditions
  • Productive - pumps almost 200 liters every minute at a pressure of 8 bar

Flaws:

  • low power
  • single stage

Price - 6 600 rubles

Aurora GALE-50

In second place in the top compressors for the garage is the two-cylinder piston model Aurora GALE-50. This compressor has direct drive - direct transmission of torque from the motor to the piston, so the device is high-powered - 2.2 kilowatts. The speed at which the compressor sucks in air reaches 412 liters per minute. The volume of the bottle is 50 liters. The pressure remains stable at 8 bar. The piston of the device needs lubrication / oils. Only one degree of compression in the cylinder by the piston. On the control panel there are indicators of the oil level in the system, a manometer. Additionally, a safety valve is provided. It can work at low temperatures (not negative), it is resistant to dusty air, there are wheels for transportation. Good, powerful, productive, unpretentious compressor. Makes a great addition to your garage or workshop. Such an addition will cost 14 thousand rubles.

Advantages:

  • High capacity 412 liters per minute
  • Resistant to polluted air
  • Small dimensions
  • Large power of 2.2 kilowatts
  • Can be transported with wheels included

Flaws:

  • High noise level during operation
  • single cylinder
  • High price

Price - 14 190 rubles

Denzel PC 3/100-504

The best compressor for the workshop in terms of power / price / quality ratio. Denzel PC 3/100-504 is an oil reciprocating compressor with a receiver volume of 100 liters. Maximum air pressure 10 bar. The model works at a voltage of 380 volts. Power 3 kilowatts. Wiring / automation will quickly burn out during power surges - sensitive to voltage changes. The device does not have a protective casing - the motor and cylinder are not covered by anything, so we recommend that you take care of ventilation in the room where the compressor will stand. Belt drive - the torque from the motor is transmitted to the pistons through a belt. Why pistons? Because there are three stages of compression and three pistons for compressing air, because of this, the performance of the device reaches 504 liters every minute. The air pressure can be adjusted. There are also protection against overheating, dry running, overload. This model costs almost twice as much as the previous one - 27 thousand rubles.

Advantages:

  • Powerful - 3 kilowatts
  • Three Cylinder/Gas Compression
  • Large receiver volume
  • Maximum pressure 10 bar
  • Three-year manufacturer's warranty
  • High performance - 504 liters per minute

Flaws:

  • Working part without protection - no protective cover
  • High price

Price - 27,095 rubles

Fubag Wood Master Kit

kompressor_dlya_pnevmoinstrumenta_L

Closes the ranking of the best compressors for the garage in 2022 with a mobile model from Fubag. The compact Wood Master Kit is made in Germany. Differs in high-quality assembly, durable work and unpretentiousness to conditions. Suitable for a small garage/workshop or outdoor work. The equipment weighs only 14 kilograms, with a capacity of 180 liters per minute, a pressure of 8 bar, a power of 1.1 kilowatts. The model works under difficult conditions - low, but not negative temperatures, dusty air, unstable voltage. Nothing special - just a quality small reciprocating compressor with good performance and quality build. Direct drive, oil-free, electric compressor powered by 220 volts. The volume of the receiver is 6 liters. There is a built-in classic pressure gauge with arrows. Such a miracle costs 6.7 thousand rubles.

Advantages:

  • Reliable and high-quality assembly
  • Manufacturer's warranty (2 years)
  • Mobility and low weight (14 kilograms)
  • High performance - 180 liters per minute
  • Long hose (10 meters) and pneumatic nail gun included

Flaws:

  • small receiver volume
  • low power

Price - 6 712 rubles

New phone after purchase: what to do with it, tips - Setafi

New phone after purchase: what to do with it, tips - SetafiHomeElectronics

creativecommons.orgSo you've got a brand new device. No matter how advanced it is, how many tens of thousands it costs, and maybe less, these are just minor details for you. The main thing is new e...

Read More
High capacity apple juicer: which one to choose? – Setafi

High capacity apple juicer: which one to choose? – SetafiHomeUncategorized

To obtain apple juice, it is better to choose sufficiently powerful devices. A large capacity apple juicer must have a large tank and overheat protection. An overview of the most reliable and at th...

Read More
How to choose a top-loading washing machine? Its pros and cons. Best Fitting Tips - Setafi

How to choose a top-loading washing machine? Its pros and cons. Best Fitting Tips - SetafiHomeAppliancesWashing Machine

Before you figure out how to choose a top-loading washing machine, you need to understand how it works. This device functions in the same way as a conventional front-facing model. But due to the ve...

Read More
Instagram story viewer