How to clean the pan from the old deposit - 12 proven ways

1. Wet the cast iron pan with warm water.
2. Prepare a dry mixture of citric acid and soda (1 to 1).
3. Pour the entire surface with the mixture and leave for 10 minutes.
4. Using a damp foam sponge, remove the grease and wash the dishes in the usual way.

1. Heat utensils on the stove.
2. Drain the melted fat.
3. Pour the entire surface with a thin layer of mustard powder and leave for 20 minutes.
4. After a while, rub the bottom and sides of the pot with a sponge without strong pressure.
5. Finally, rinse with plenty of water.

1. Spread evenly a few tablespoons of salt on the bottom of the cauldron.
2. Top with the same spoonful of 9% vinegar.
3. Put the construction on the stove and wait until the components evaporate.
4. Wash the cauldron as usual.

1. Mix one part 9% vinegar with one part baking soda.
2. Process the pan from all sides with the mixture and leave for 30 minutes.
3. After half an hour, remove the residue with a sponge.

This is the most effective way to wash an old cast iron skillet. Algorithm:

1. Grate 50 g. laundry soap.
2. Take a heat-resistant container in which the object to be cleaned can easily fit, and pour half the water inside.
3. Boil water, add soap chips to it and add a small jar of stationery glue.
4. Dip the cast iron product in this solution and boil for 3 hours.
5. Finally, be sure to rinse the pan with detergent.

1. Wet the dish with warm water.
2. Crush 10 tablets of activated carbon and sprinkle them on the desired surface.
3. Leave on for 60 minutes, and after a while, thoroughly rinse the container under running water.

1. Fill the container in which the reanimated vessel will fit with water and boil it.
2. Add to boiling water: 50 gr. grated household soap, 100 ml of PVA glue and 100 gr. soda ash.
3. Boil the cauldron in the liquid for 5–6 hours.
4. After a while, let the pan cool and clean it with a stiff sponge.

In the process of boiling the amount of water will decrease all the time. Do not forget to top it up.

The procedure completely coincides with the 7 method of cleaning cast iron. The only difference is that it is necessary to digest 2–3 hours.

The result of digestion can be seen in the photo.

1. Pour 5 liters of water into a large container.
2. Boil water and pour 150 grams inside. salt.
3. Dip dirty utensils in boiling water and boil for 1.5 hours.
4. At the end wash with the addition of detergent.

Using this method, you can easily remove carbon from the inside and outside of the tank.

1. Fill the entire tank with sand.
2. Heat the structure on the fire and leave to cool.
3. At the end, rinse thoroughly under running water.

1. Fill the bottom of the tank with water and put on a slow fire.
2. Boil water for 15 minutes.
3. When the pot cools down, the carbon can be removed with a soft brush.

The best detergent for cleaning deposits with delicate coatings:

1. Moisten a cloth with alcohol.
2. Handle the burnt places.
3. Rinse thoroughly with water.