Error E04 in the dishwasher Bosch

The best protection against click fraud.

What should I do if the error E04 is displayed in the Bosch dishwasher? It is necessary to determine the value of the code - it indicates the failure of the flow sensor, because, for example, there was a blockage. Our article will help you to make detailed decoding, and also will tell you how to fix the problem.

If the dishwasher stops operation and displays incomprehensible symbols on the display, the system notifies the user of the problem by using the self-diagnosis function.

Content of the material:

  • 1What does the DTC mean?
  • 2How to fix the situation

What does the DTC mean?

The dishwasher can show error E 04 when the flow sensor breaks down, and if the injectors fail. Due to clogging or high water hardness, jets do not pass well through the holes in the sprinkler, which leads to the braking of the PMM.

Water does not go in well, but this position is uncritical, so you can try to eliminate the damage yourself.

How to fix the situation

First you have to check whether the fault is actually occurring, or it is a failure in the system. Try to reset the code E04:

instagram viewer
  • disconnect the Bosch dishwasher from the mains;
  • wait 10-15 minutes;
  • please try restarting.

If the icons have disappeared and no longer appear, it means everything is in order. But if the machine again displays an error on the screen, then you need to take action.

What to do? To clean the sprinkler:

  1. Remove the rocker from the seat.
  2. Rinse under the pressure of water.
  3. Clean the nozzles (holes) with a toothpick.

Use a special salt for dishwashers. It allows you to reduce the hardness of water and prevents the formation of calcareous deposits on the parts.How to choose a tool, read in a separate article.

The parts are cleaned, but the trouble code appeared again? Then replace the flow sensor. It is designed to control the amount of water that enters the nozzles. Part is installed in some models of "Bosch" instead of the usual pressure switch. From the sensor, the stop signal arrives at the control module, which instructs the user to stop the water intake.

We recommend choosing a spare part for replacement to focus on the make and model of your dishwasher. Because all components are original.

You can avoid such breakdowns ifto take care of machinery in a timely manner. At least once a month, clean the filters and other parts. Use tools to avoid the appearance of scale.

Learn how to troubleshoot other Bosch dishwasher errors.

SE error in LG washing machines

SE error in LG washing machinesError Codes

What should I do if the LG washing machine failed? Pay attention to signs of breakage. If the error code SE lights up on the washer display, the CM can take water to the tank normally, however ...

Read More
F10 error in the washing machine Atlant

F10 error in the washing machine AtlantError Codes

What should I do if the Atlant washing machine door is not blocked? In this case, the wash does not start, and the display shows the error F10. Error F10 is decoded as a problem UBL: a locking d...

Read More
PF error in LG washing machine

PF error in LG washing machineError Codes

The self-diagnosis system of the washing machine is able to detect a malfunction and highlight its code on the display board. If your machine LG, performing washing, stopped, and then the display ...

Read More
Instagram story viewer