Owners of modern sanitary ware acrylic often experience a rapid loss of its its original form, which you can not return. And most often it is due to the fact that caring for her usual ways for themselves - not knowing that many funds can not be used simply. But the acrylic wash tub or sink, so as not to hurt her?
The answer is simple: only specially designated for that purpose. You want details? I'll tell everything.
5 means unacceptable cleaning
In the acrylic surface of the many advantages, including low thermal conductivity and availability of repair coverage with their own hands. But there are also disadvantages, the most annoying of which can be considered material sensitivity to the effects of many of us habitually used by vehicles.
This capricious nature of acrylic makes very selectively apply cleaning agents and devices. To avoid damage to its highness bath and deprive her of the royal attraction, you have to give up such things as:
- Hard sponges and brushesThat can scratch the surface;
- Powders with abrasive particles, Microscopic scratches which are invisible individually, but their number does bath surface dull and rough;
- Detergents with chlorineWhich corrodes the material and makes it porous;
- Liquids and gels with acetone and ammoniaIt is acting like chlorine, but with less intensity.
- Also acrylic bath can not be washed by means of, which is composed of phosphoric or formic acid, ammonia, formaldehydes.
As you have seen, the majority of domestic methods does not suit us, as well as familiar household chemicals to clean enamel or porcelain coating. Therefore, before you clean acrylic bath available in your arsenal of tools to make sure they will not harm her.
Means and methods for gentle care for acrylic baths
If your font is already in a very poor condition, it is better to restore, causing a fresh coat of acrylic. It must deal with professionals. And we are interested in how to clean the acrylic bathtub at home.
It depends on the type of pollution.
daily care
With this plumbing is important to follow one principle: do not run. Therefore, it is desirable to wash the acrylic bathtub after each use with a soft cloth or sponge and the pure water. Then wipe dry to the evaporation the water is not left behind limescale.
Use cleaner acrylic bathtubs are not recommended unnecessarily. Only a couple of times a month. With regular care will be enough to maintain its whiteness and radiant appearance.
Removing stains and plaque
If you often neglect routine care, will have to decide how to clean a bath of rust and coating.
rusty spots may appear on the surface of the acrylic in two cases:
- If the tap water It contains a lot of iron;
- If the taps and mixers faulty and leaking constantly.
To get rid of yellow stains by using such special means as Chister Mr, Mr Muscle Radomir and other intended precisely for acrylic.
How to use each of them tells the instruction to the drug. Most often they are applied to the surface, spread on it with a sponge and leave for some time. Then washed with warm water bath and wiped dry again.
But it is easier to avoid the appearance of such spots at all. Why should either attend the installation of water purification systems, or to change or repair the faucets in a timely manner.
From plaque lime and soap help to get rid of:
- All the samespecial sprays and gelsHelping to do without many hours of scrubbing and scraping water stone. Moreover, to do so in the case of acrylic baths can not.
- homemade waysHow to remove limescale in the bathroom. As the solvent used in their usual vinegar or citric acid. At full bath require half liter of vinegar or 7-9% acid solution.
If you just have an essence, it is first necessary to dilute, focusing on the following proportions:
To wash acrylic bath, do the following::
- Score it to a warm water;
- Pour into water solution was prepared and mix;
- Leave to act for 12-15 hours;
- Drain, rinse with pure water bath and wipe it.
This procedure is sufficient to carry out 1-2 times a year.
antimicrobial cleaning
If in the bathroom washing pets, before using it for themselves and especially bathing the child Hot desirable to disinfect. Applicable for this cleanser should also be special. Its price is higher than that of ordinary liquids and gels, but the restoration or replacement of plumbing will cost much more.
The method of application is specified in the instructions. Usually it is the same as in removing limescale.
conclusion
If you know how and what to wash acrylic bath it for many years to maintain the original brightness and luster. The basic rule: Do not use this for abrasives and corrosive substances that can damage the surface. All of them are listed above.
And choose the best way to care for your plumbing fixtures will help the video in this article. If you have already chosen a method of trial and error, please share your experiences in the comments useful.
