Stages of repair of a child's room

click fraud protection

Contents

  1. Creating an
  • Project Dismantling Work
  • Wiring
  • Rough Finishing
  • Installing
  • Windows Finishing
  • Installing Furniture
  • To complete
  • , a child from his earliest years needs a personal space, he needs to make a well-off stock, he, he, he,null, he, he would need to make a well, he, he,null, he,null, he, he, he,null, he, he, he,null, he,null, he,null, he,null, he, he, he, he, he would need to make a well, he, he would, he, he would have to make a well-off man, he, he would need to make a well, he, he would have, he, he, he would need to make, he, he would have enough to make himself, he, he would have enough to make himself, he, he will have, he, he will need to make his living room, ASH88

    1. all requirements for this room. It is necessary to use only high-quality and safe for the child's health construction and finishing materials, which, moreover, will be able to withstand decent loads and active child's games. In preparation for the repair, it is worth asking about the tastes and wishes of the child, if he is already old enough for this. In what sequence to carry out repair work in order to get a children's dream room as a result?
      instagram viewer

      Creating a Project

      Conducting any more or less large-scale work requires a plan, which is easy to build, if you clearly know the final goal. This is what the design project of the nursery will be needed for. You can make it on your own, and this occupation will require a minimum of skills. To begin with, it is necessary to accurately measure all the parameters of the future children's room: height, width and length, determine the dimensions of the window and door openings and their distance from the walls. In the presence of non-standard architectural elements it is necessary to conduct additional measurements. According to the data obtained, a plan of the room is drawn up on a sheet or in a special application.

      Now you can begin to plan the organization of the space, think over where the main pieces of furniture will be located, the lighting, the style in which the nursery will be decorated, etc. Such planning will help to avoid possible errors in the placement of furniture and will allow us to better imagine the future interior and, if possible, correct it even at the planning stage.

      When creating a children's room project, needs to take into account a number of specific requirements for this room:

      • space must be zoned by , and the room must fulfill many functions. It is necessary to select a recreation area, a work and play area, as well as a storage area. Each of these parts may require an original finish, so it is important to determine in advance the location of the main zones;
      • If room is designed for two children , then it is important to allocate in it a common and personal space. You can arrange each of the individual zones in a specific style and color.

      After the project has been completed, you can determine the list of necessary works, their sequence, evaluate the repair budget and determine the necessary materials.

      Dismantling works

      The first thing they do is take out all the furniture and appliances from the room, and then they start to get rid of the finishing that needs replacing. If necessary, at this stage also , all unnecessary partitions are demolished, but this should be agreed in advance with the relevant authorities. If, for example, the floor covering does not need dismantling, it should be securely covered with a film for the period of repair.

      Depending on which finishing materials were previously used, the way they are dismantled will be different. So, if the walls were covered with wallpaper , then you can remove them with a spatula, after soaking the wallpaper itself. It is better to remove with special solvents, and whitewash from the ceiling is removed in several stages: first wash off with warm water, then scrub with a spatula, and then wipe the surface with a wet sponge. With dismantling flooring, as a rule, there are no problems: linoleum and laminate, which are used most often, can be easily removed with your own hands.

      Installation of electrical wiring

      If the nursery is planning to replace the electrical wiring, then all the work should be done at this stage, because, most likely, it will be necessary to perform wall chroming, which only makes sense before finishing the finishing work. At this point, the interior of the future children's room should be presented as clearly as possible, and it is better to rely on a previously prepared project, where all lighting points and places of use of equipment are marked with .

      The lighting in the children's room should be multi-level: you need to provide for general lighting, work, lighting in the recreation area, as well as lighting near the bed. Lighting built into the ceiling is excellent for children's premises: such lamps cannot be broken even when playing active games. The only disadvantage of such lighting is the need to use suspended or suspended ceiling systems. It is also possible to use a chandelier for general lighting, and preferably with a plastic lampshade. Do not forget about the need for lighting near the bed and desktop, as well as the possibility of using decorative lighting.

      If there is a computer in the room, then it is necessary to provide several outlets in the intended location of .Also, sockets must be placed at all points of the possible connection of electrical appliances, and sockets with overlays will be suitable for the children's room.

      Draft finish

      If necessary, build partitions or some unusual architectural elements, they are built at this stage. Next thing is the alignment of the walls of the , so that the final finish is perfect. To level the surface of the walls, you can use a putty or plaster, but before that it is better to treat them with a primer: the process of preparing the solution is simple, but you need to prepare it in a volume sufficient for half an hour of work so that it does not freeze.

      Plaster is recommended to be applied over the beacons to get a flat surface, and some masters advise to use the plaster mortar only where there are impressive cracks on the walls, while others say it is necessary to cover the entire surface with mortar. If you chose a putty for leveling, then after it has dried it is necessary to sand the walls with emery paper. An alternative to all these dirty work on leveling walls - sheets of drywall : the installation process is clean and fast, and the result is perfectly flat walls. Some drywall parents make interesting voluminous solutions that give children a special atmosphere. The only disadvantage of this option is the need to build a frame, and this means that you will have to lose part of the usable area.

      The ceiling also needs careful preparation of the , especially if it is to be covered with paint or plaster. As a rule, a plaster mortar is used for leveling, which, after application, is cleaned and primed. If you plan to use suspended structures or suspended ceilings , then bring the main ceiling to the ideal state is not necessary.

      Paul before finishing the finish it is important to level the .If the irregularities are global, then it is better to use a cement-sand screed, but in most cases it is possible to do with the use of self-leveling mixture , which is perfect especially in cases when the repair is done with your own hands. Before using such a solution, you need to make sure that the main surface of the floor is strong, clean and free from paint and oil stains.

      After cleaning and cleaning the floor surface, it is desirable to apply a primer to it, and only then proceed to the preparation of the solution. When preparing it, it is necessary to follow the manufacturer’s instructions as strictly as possible, and when filling the floor with a mixture, make sure that at the thinnest point the thickness is at least 5 mm. In parallel, the self-leveling mixture is leveled so that it can evenly fill the entire floor surface. After the mixture has been poured, it is necessary to go through the roller several times every 40 minutes so that all the excess air can freely escape. Drying time - about a couple of days. For children’s rooms, it is also appropriate to use the system of underfloor heating , so that even in winter games on the floor are not a source of cold. Heated floors should not be laid under the furniture, and the project created at the first stages will help determine its exact location.

      Installation of windows

      Windows is another important detail of the children's room. If the old can no longer fully perform their duties, then you need to take care of the replacement. It is recommended to use modern double-glazed windows , which will not allow drafts, let in noise, cold or heat from the street. To ensure normal ventilation in the room, pay attention to the window was equipped with a special valve or ventilation mode.

      At this stage, you can also replace the door, if necessary. After installing the new door, it is better to close it with polyethylene and masking tape so as not to get dirty during the finishing work.

      Finishing

      It is recommended to start finishing the finishing with from the ceiling in order not to stain the already finished walls and ceiling. For finishing the ceiling in the nursery, there are many interesting solutions.

      • The most popular is painting , but you need to use only safe materials, and you can decorate the monochromatic surface of the ceiling with painted stars or glowing stickers.
      • An alternative to painting - decorative plaster , which is a natural and completely safe material.
      • You can also use wallpaper for decoration of the ceiling: both plain monochrome, if there are so many bright elements in the room, and bright, with the image of clouds or cartoon characters.
      • Another alternative - whitewashing : the option is the most budget, well-suited for children's rooms, but not very durable.
      • Today, the suspended ceilings and tension structures are increasingly used for children's rooms. They are mounted quickly, are not accompanied by dirty work, so they perform after the wall and ceiling. Such ceilings open a huge scope for imagination in the field of lighting, and stretch ceilings can have not just any shade, but also any image you like.

      The finishing material for walls should be as environmentally friendly and safe as possible, easy to maintain and durable.

      1. Often wallpapers are used for wall decoration in a nursery, but not all types of are suitable. You need to choose from those that are made from natural materials and breathable. The easiest and budget option - paper wallpaper, which have a huge assortment of colors and patterns. Non-woven, cork wallpaper, wallpaper based on serpyanka and wood veneer, as well as all those produced using plant material, such as bamboo, cane, straw, jute, etc., are also suitable. Do not forget that the wallpaper can be combined with each other, bringing a zest to the interior and highlighting the individual zones of the room.
      2. In addition to wallpaper, you can also use painting , with water-based paints as a priority, as well as compositions that indicate that they are intended for children's premises. In some places of the room you can use magnetic and slate paint to create entertaining zones for your baby.
      3. Also decorative plaster and fabric will be suitable for wall decoration, but the latter is better to use as a finishing element. The main decoration can be an unobtrusive calm color, and you can decorate the walls with vinyl stickers: as your child grows and his tastes change, such stickers can be easily replaced.

      The flooring should be taken as carefully as possible, since the child will spend a lot of time playing games on the floor. The finishing material should be safe, preferably natural, warm, easy to clean, moisture resistant. The options that meet these requirements, weight, and the choice depends on the budget and vision of the future interior.

      • The most natural and warm material is tree, but not everyone will be satisfied with it.
      • Alternative to solid wood - parquet , consisting of several layers of different wood, or laminate - budget replacement parquet, which has excellent aesthetic and performance properties, can be supplemented with soft small floor mats.
      • is considered to be an excellent material for the floor in the nursery. cork: this finish is warm, eco-friendly, non-slip and durable.
      • Linoleum and PVC tiles can also be used in the nursery, only they need to be purchased from trusted manufacturers that provide a safety certificate for their products.
      • carpet is often used in children’s. carpet is a soft and pleasant to the touch coating, always warm, non-slip, but the downside is the ability to accumulate dust, which is an allergen.
      • In addition, also uses carpets and self-leveling floors for decoration.

      Furniture Installation

      When all repairs have been carried out, the most pleasant thing is to choose and install furniture. However, this issue requires a careful approach, because the furniture must be safe, comfortable, ergonomic and fit into the interior of the room. Among the necessary items is to provide a bed, a desk, a bedside table, a system of shelves or a closet to store all the necessary. In addition, it is necessary to equip a sports corner or play area, and for older children, you can choose a sofa and padded stools.

      The best material for furniture is wood, but you can use MDF.If the budget is limited, then you can pay attention to the elements of the chipboard, but be sure to look at the quality certificates: for formaldehyde emissions such structures should belong to the class E0 or E1.Also for the children's room fit plastic and wicker furniture, but from the glass elements should be abandoned.

      For upholstered furniture it is better to choose natural upholstery, the mattress should be orthopedic. Do not forget about textiles , which can give any nursery the necessary atmosphere. Cute pillows and bedspreads, curtains, carpets can be made in a variety of ways and create the mood of a room. Do not miss the elements of decor: they should not be much, but they make the interior interesting and develop the imagination and taste of the child.

      At the end of

      , Repairing a children's room will be a fatiguing and creative exercise, if you immediately determine which result you need to come to and highlight the main stages of work. You can decorate the children's space in an original and tasteful way in many different ways, and if the child is already old enough and has his own taste, then it doesn’t stop to ask his opinion about the design of his space. After all the repairs have been completed, the room must stand for a couple of days before the child resides there.

      Tags: Children's room, Preparing to repair the room
    How to draw a kitchen yourself on the computer and by hand

    How to draw a kitchen yourself on the computer and by handRepair Of

    It takes ~ 2 minutes to read To create a kitchen in an original style that is not like everyone else, which has a zest and idea is the dream of any host. Of course, you can contact the design c...

    Read More
    PVC panels for the kitchen: advantages and disadvantages

    PVC panels for the kitchen: advantages and disadvantagesRepair Of

    Russia, Moscow region, Moscow+79041000555 It takes ~ 3 minutes to read A kitchen is a room with a special operating mode. During cooking, moisture and various impurities settle on the walls ...

    Read More
    DIY gas stove connection: rules and nuances

    DIY gas stove connection: rules and nuancesRepair Of

    Russia, Moscow region, Moscow+79041000555 It takes ~ 2 minutes to read Connecting a gas stove is a fairly responsible action. But if you arm yourself with useful knowledge, watch a video, co...

    Read More
    Instagram story viewer