How to lengthen the drain hose washing machine

Contents:
  • Geometric features of the drain hose
  • Process for extending the drain hose

At this point in time, the presence of a washing machine is not surprising. It greatly simplifies the process of washing any things, such as: clothes, clothes, pillows, blankets, soft toys. At the moment, washing is fully automated. However, sometimes people may have problems with connecting the washing unit to communications, namely, near the drain. This is due to the small length of the hose included in the package. You may wonder how to lengthen the drain and filling hose of a washing machine? We will try to tell you how to do it correctly, and help you understand it.

This problem can be solved in two ways:

  • by purchasing a hose of the desired length;
  • build up your existing drain hose.

Geometrical features of the drain hose

Before lengthening the drain hose of a washing machine, you need to clearly know everything about its geometric characteristics. Most often the drain hose is connected to the washing machine from the factory. In case of urgent need you can lengthen the drain hose of the washing machine to the value you need. Due to the absence of tremendous pressure during simple manipulations, you can build up the hose and completely prevent any leakage. You can stop it effortlessly with a special connection. It is strictly forbidden to lift the drain hose to a greater height in excess of 100 centimeters, due to the low power of the drain pump( pump).

instagram viewer

When connecting a hose to a washing machine using any of the geometrical methods, it is necessary to ensure its free tension and pay special attention to its top point. The pump must have good lifting properties, namely, exceed the lower edge of the device by 60 centimeters. This value applies to all models of washing units. The exact value is indicated in the technical manual or other documentation included with the product.

This is necessary in order to prevent water from flowing into the sewage system under its own weight from the machine. In case of non-observance of this rule, the washing machine will be in the state of filling up the liquid for the nth period of time, which may adversely affect it.

Process for lengthening the drain hose

Items required for hose extension:

  • native filling hose from the factory;
  • clamping clamps;
  • special connector.

The process for lengthening the hose of a washing machine can be divided into three stages:

The first step is to purchase a similar one to your hose. In the absence of such in the shops of the city or from dealers it is necessary to choose the one as close as possible to it, the main criterion is the absence of discrepancies in diameter.

For the second stage you will need to disconnect the washing from the mains. Then it is necessary to connect the hose for the washing machine with a connector purchased between them, which you can purchase at any building store in the city. All connecting contacts must be tight and sealed so that water does not leak into them. The connection points must correspond to the marks that are located on each connecting device.

In the third stage, it is necessary to fix the rubber tips on the hoses using clamps. You must ensure maximum density in order to prevent possible ruptures, followed by leakage. In case you use plastic connectors, you will need to place a small segment of a similar hose in its cavity, after which you install a rubber tip on it. The fastening of such a connection must be made with just one clamp.

It is worth noting that before turning on the washing machine you need to check the tightness of all fasteners. In the absence of the above, you can additionally lubricate the compounds with sealants. For safety reasons, experts do not recommend using an elongated hose over five meters. It is necessary to eliminate all twists and kinks of the hose in order to ensure its long operation and to protect itself from possible damage to its structure.

In this article, we looked at the main way how to lengthen the drain and inlet hose of a washing machine. It is useful to you if you for some reason do not want to buy more.

How to choose coarse water filters for an apartment

How to choose coarse water filters for an apartmentRepair OfKitchens

If a city apartment is connected to a common water supply system, then drinking liquid comes from a well or a well to a country house or dacha. The purity of the life-giving moisture is questionabl...

Read More
Kitchen under the window: advantages and disadvantages, sink choice

Kitchen under the window: advantages and disadvantages, sink choiceRepair OfKitchens

The kitchen under the window is an original and not often found option in our apartments. In some cases (rectangular layout, small room), there is simply no place to place the headset and you have ...

Read More
Connecting the hob to the mains: instructions

Connecting the hob to the mains: instructionsRepair OfKitchens

At first glance, connecting the hob to the power supply yourself seems to be a rather complicated procedure. Having bought an expensive device, not everyone will also master the services of a maste...

Read More