How to remove or disassemble the washing machine drum at home

Often in the process of washing the machine begins to produce strange sounds, and there is also a strong vibration. Such phenomena can be caused by the fact that a small object has hit the drum units. Most often it is bones from underwear, hardware, buttons and buttons. Such a trifle can cause serious damage. As a rule, the gland of the drum, the drum itself or the washing machine tank are damaged first.

Is it possible to solve the problem of

? If something got into the drum unit, then it could stop the washing machine and break it. To remove the garbage, it is necessary to disassemble the unit. However, it is worth considering that there are some nuances. Remove the drum should be very careful not to hurt the other parts of the device. As a rule, such repairs are done by professional craftsmen. If there is no opportunity to seek help from specialists, then you can try to solve the problem yourself. The main thing is to follow the recommendations below.

See also - Repairing the tank of a washing machine: repairing leaks

What do you need to work

To fix the problem, you need to disassemble the washing machine. The following tools are required for this:

1. Screwdriver.
2. Nippers.
3. A set of stars.
4. Pliers.
5. A set of screwdrivers and hexagons.
6. Ratchet and heads.
7. Hammer.

If you plan to replace certain parts, they should be purchased in advance. It should be noted that it is not so easy to disassemble a washing machine without tools. Therefore, they also need to prepare in advance.

See also - Washing machine flows from the bottom - causes and repair leaks

Analysis of the machine with front-loading

This is the most common modification of washing machines. First of all, the device must be disconnected from the mains, remove the drain hose from the sewer. Only then can you start disassembling the unit. First you need to remove the back cover, unscrewing all screws. The same is required to do with the front of the device.

Carefully remove the container intended for the detergent by unscrewing all the hardware. Then you can remove the control panel. It can not take off. It is enough to fix a little aside so that it does not interfere with the work. If the panel is still decided to be removed, then it is worth taking a picture in which all the wires and their connections will be visible. Otherwise, you will not be able to connect them correctly.

Now you should remove the hatch cuff. To do this, just pull the spring. It is also necessary to remove the bottom panel. All hardware should be unscrewed. The front wall of the unit must be removed along with the hatch. That's all. The unit is disassembled. Now you need to remove the tank.

How to remove the tank

The first step is to disconnect everything from the tank: shock absorbers, wiring, connections, counterweight. It is necessary to unscrew the central bolt, which is located on the cover of the motor. At the same time it is necessary to hold the drum itself with your hand. After that, you can remove the engine washing machine.

It should be noted that removing the drum is a complicated procedure that does not tolerate haste. In this case, it is necessary to unscrew all hardware and carefully remove the drum so that the details of the device located next to it are not damaged.

After removal, the tank can be disassembled into several parts. It is worth noting that often its parts are glued very securely and firmly. Even specialized services refuse to engage in the repair of certain models of washing machines because of this feature.

Vertical Loading Machine

Vertical Loading Units have several advantages. First of all, they are easy to use, easy to download. In addition, the drum in such models is fixed in two places. This significantly increases the lifetime of the device. Understands this technique as follows:

1. It is necessary to unscrew all hardware located on the front and rear wall.
2. Slide the right side panel back slightly and then gently remove it.
3. After that, you need to disconnect all the wires and remove hardware, located in a circle of plastic covers.
4. The same must be done with the second side.
5. After that, you need to unscrew the hardware that hold the shaft.
6. That's it. It remains to close the door of the tank, and then remove the tank itself.

In the process it is worth taking pictures so that when assembling the unit does not get confused. If the plastic cover is soldered, you need to pull it towards you, and then cut it with a drill.