How to install and connect a washing machine

click fraud protection

The first washing machine was invented by Leonardo da Vinci more than five centuries ago. However, the citizens of the post-Soviet space its normal incarnation became available only a little more than 25 years ago - for the leaders considered this device to be too luxurious.

Installing a washing machine of a modern model on a properly prepared place is half an hour's work for a professional. The instruction will allow the house master to realize the connection of the washing machine with his own hands in the bathroom, in the hallway or in the kitchen - it all depends on the desire of the hostess.

Be sure to remember that the installation of washing machines necessarily implies some kind of free space - two centimeters from each side of the housing of household appliances. This is due to the fact that in the spin mode of the machine the machine vibrates( the strength of the vibration is determined by the class and weight of the weighting agent).

instagram viewer

A full automatic does not imply such exercises as a drain hose hooked to the sink, rolling out the unit during washing from a niche in the wall or pouring water from the tap. If you properly connect an electromechanical washerwoman with your own hands, you will forget about the sink full of soaked socks, or a pile of bedclothes.

Table of Contents

  • 1 Types of Washing Machines
  • 2 Four Basic Conditions for Success? ”, Because there are at least three main types of these devices:
    • The washing machine is a vertical loading machine. It is best to install and connect in the bathroom, where a small space of the room makes it difficult to use the front door.
    • A standard type automatic washing machine can be installed anywhere, although in some cases you will have to buy a longer hose or hoses.
    • The same genius who planned the Khrushchev houses, and later the studio apartment for half-people, also invented a typewriter with a reduced size and load capacity. It fits under the sink, is able to wash one set of bed linen at a time and, in general, is not bad for those who try to save space and hate to wash with their own hands.

    Installing and connecting any type of washing machine is quite easy if you carefully approach the solution of sub-items of the global task.

    Four basic conditions for achieving success

    Installing washing machines in the bathroom is not a big deal. Having hands, a head, the minimum necessary tools and spare parts, it would be nice for the master to get rid of the sympathetic public - otherwise the installation of the washing machine may not end with the plan. What is required for a long, uninterrupted operation of equipment? Instructions set out in human language, answering the question of how to properly install a washing machine. So, are necessary: ​​

    • Solid smooth surface. Ideally, the installation of washing machines is made on the floor tile or bare concrete in the bathroom.
    • Reliably fixed output of cold water with a tap. It is necessary to tighten the filler hose by hand: hard, but trying not to tear the thread.
    • Fixed the same conclusion under the drain hose( if you are not going to cling it to the sink).The fact is that even if the installation of the washing machine with their own hands is done correctly, the equipment slightly fevers during the spin cycle and it throws out the water in jerks. Turkish or Polish versions of siphons with drain nozzles can not withstand a similar temperament. Sometimes it is really worth clinging the drain hose to the sink with the help of the attachment attached to the kit( such installation of the washing machine is less troublesome and safer for pipes).
    • A separate, permanently accessible electrical outlet with an indispensable grounding, carried out from the meter SPECIALLY in order to install the washing machine in compliance with all safety rules.

    The instruction says that the grounding of the washing machine has saved many lives, but there are still those who want to verify this fact on their own.

    Before starting the main works

    If you have to install, we advise you to carefully study the accompanying documents. Fundamentals of safety occupy two thirds of the total mass of waste paper, but instructions for preparing this model for installation may be useful. Many craftsmen, who know exactly how to install a washing machine, automatically destroyed the miracle of technology without paying attention to innovations invented by the manufacturer.

    Locking drum bolts or pieces of foam that are inserted into the housing for transport, a drain filter wrapped in polyethylene, or a filler hose with temporary dirt valves are not listed.

    A washing machine is sometimes faster to install and connect properly than to pre-unpack. However, the installation of washing machines does not stand in a hurry. Remember this!

    Connecting

    Properly done preparatory work allows you to install a washing machine with your own hands in the kitchen, in the bathroom or under the sink in the garage( in other words, anywhere) quickly and reliably. It is necessary to begin with a drain, fixing the hose with a hose clamp on the drain spout or placing it in the sink. We remind you that installing a washing machine in a bathroom with a sink in the sink is fraught with problems of hygienic nature - after each wash you will have to wash the sink thoroughly. In our opinion, it will be more accurate to spend the time and build up a double for a siphon with a separate spout into the outlet of the fan pipe. Also, do not forget to bend the hose so that an air-water plug forms( there is a picture on each instruction).You can extend the drain hose with an adapter and two clamps.

    It is simpler to fasten the supply hose, as there are few options: the L-shaped end is attached to the washing machine, and the straight line - to the still closed tap. The installation will be more successful if you check for the presence in the receiving opening of the unpacked fine filter. By the way, the filter can also be put on the water pipe itself in the bathroom, it will extend the life of all the plumbing in the apartment.

    Installing a washing machine machine at the place of deployment - a separate song for patient and attentive performers. In the bathroom, in the kitchen or in the hallway, she( the machine) is obliged to stand like a sentinel in front of Buckingham Palace - strictly according to the ranking and firmly, like cast in bronze. Four adjusting legs will allow to set the unit strictly on the level, and all of them must stand firmly on the surface. There was a case when an excessive mass of loaded linen and careless installation led to the “dances” of the apparatus during the spin cycle, as a result of which the owners had to replace the sink in the bathroom and paint the enamel on the bathtub itself.

    In each case, the end of the work comes to an end, and in our case the switching on of the power supply is comparable to the breaking of a bottle of champagne on board the ship being launched. The installation of the washing machine was successful if it withstood at least three complete wash cycles without moving aside and without leaking at the junctions. Very soon you will learn how to determine the weight of the laundry and the amount of laundry detergent by eye, but for now, be gentle and attentive with her, she is still so young.

    Interesting:
Perfection of "smart home" from Xiaomi

Perfection of "smart home" from XiaomiHow To Install

Perfection of "smart home" from Xiaomi. .. . One of the trends of modernity is the creation of a "smart home". There are many manufacturers that produce devices for the implementation of a dream ho...

Read More
What is a channel air conditioner: the principle of operation, selection and installation of the device

What is a channel air conditioner: the principle of operation, selection and installation of the deviceHow To Install

What is a channel air conditioner: the principle of operation, selection and installation of the device. .. . Choosing an air conditioner for a house or other buildings, you need to take into accou...

Read More
Self-connection of a three-key switch: how to avoid mistakes

Self-connection of a three-key switch: how to avoid mistakesHow To Install

Self-connection of a three-key switch: how to avoid mistakes. .. . The main purpose of the three-key switch is to save electricity. A simple device allows you to conveniently control the intensity ...

Read More
Instagram story viewer