Doors for interior doors: 5 tips on choosing door liners

Contents

1. 1. The functional purpose of the casings
2. 2. Types of platbands on the material of manufacture

• pay attention when choosing?
• 5. How to carefully trim and fix the trim

In very rare cases, repairs in the apartment can do without replacing interior doors with new ones. There may be several reasons - either the old canvases do not fit the new modern interior or they are simply bored, or the floor covering has changed, and the operation of the doors has simply become impossible. In any case, before you will be the choice of not only the canvas itself, but also the of the platbands to it. A variety of shapes, sizes, colors and textures can put many in a difficult position. Therefore, today we will take a closer look at the characteristics of this important element and give tips on choosing door frames for interior doors.



1. Functional designation of the platbands of the

Platbands is a very important component of the entire door structure, which is

instagram viewer
flat or volumetric strips with a width of about 70 mm and an with a thickness of 8 to 10 mm. They make out the entire perimeter of the doorway. For what is done:
• Their primary role, of course, lies in the masking of the attachment of the door frame to the walls. You see, after installing the door frame and the canvas, the appearance, to put it mildly, is not very attractive;
• Harmoniously chosen trim will help to make the opening neat and give it a complete look;
• In addition, such a frame will attract attention and focus on the beautiful door leaf, which sometimes becomes the highlight of the entire room, preventing it from being lost against the background of the wall;
• Sometimes the trim is chosen not in tune with the door leaf, but in the color of the pieces of furniture. Such a move combines the with two functions of the - creating an emphasis on the doorway by using several colors and linking it to the overall color scheme of the whole room.

Platbands are used to design not only the usual swing doors, but also for finishing sliding systems, portals and arched vaults. As a rule, when ordering a door leaf, the most suitable door box and trim are offered as a set. In this case, they completely repeat the color and texture of the door material and have a standard form. If you want to choose a more interesting design option, you will have to re-buy the trim on your own.



2. Types of platbands on the material of manufacture



Wooden platbands

One of the most common types, which is environmentally friendly, reliable, visual appeal and long service life. As the material is usually used solid woods, such as pine. Wooden slats are perfect for any style of door leaf and will advantageously complement its appearance. A huge advantage of this material is the ability to manufacture the casing in both the most familiar and non-standard configuration. Therefore, in turn, wooden platbands are divided into:

• Smooth - the simplest, but, nevertheless, fairly sought-after form. Due to this, they differ in affordable cost and versatility. We can safely say that this is a win-win option.
• Semicircular - having a characteristic rounding across the entire width. The radius of rounding can be anything from barely noticeable to characteristically pronounced. This moment is selected individually, based on consumer preferences.
• The relief version has a more interesting design. For the embodiment of design ideas and the maximum transfer of the relief, use valuable wood, which significantly increases the cost of the finished product. The drawing can be made in the form of longitudinal strips, crowned at the corners of the capital or squares with a distinctive pattern. They vaguely resemble small columns. Relief drawing occurs on specialized milling machines. This adds a little more to their value.
• For use in rooms that are characterized by frequent changes in temperature and humidity, it is recommended to use the trim from such wood as maple or oak. For additional protection, their surface is covered with special dyes or natural wood veneer. This type of platbands can have both an equal, and a relief surface.
• Carved trim - the most expensive and effective option. With their help, you can radically transform even the most ordinary door leaf, which has no hint of a pattern. They are perfect for the design of the doorway in a classic or antique interior, where special attention is paid to trifles.


Platbands from MDF

Platbands from MDF are considered a budget option and are much lower in value than their counterparts from the item above. Despite this, their performance characteristics are not inferior, and in some moments even are superior to wooden products. For example, this material is not subject to the process of rotting, which significantly increases their service life. The appearance is very close to natural, especially if not only the color, but also the texture is well chosen. To lack of can be attributed to a high coefficient of moisture absorption, which can lead to swelling. Therefore, it is not necessary to install this kind of trim in rooms with high humidity. According to , with its form, the MDF trim can be both flat and flat and have a rounding radius.



Plastic Caps

Considered very practical due to its resistance to high humidity, ultraviolet radiation and temporary deformations. It is a pleasure to care for such elements, because you can always try to remove any dirt with a damp cloth and detergent. Another undoubted advantage of plastic is its immunity to temperature extremes, which is especially important in the bathroom or dining room. A variety of colors and textures will allow you to choose the option as close as possible to the appearance of the door leaf. And, of course, will be pleased with the cost of products from this material.



Metal casings

Many people believe that metal plat bands are more suitable for the design of entrance doors and then from their outer side. But in view of the fact that high-tech interiors are becoming increasingly popular, and loft minimalism, designers regularly use metal elements to frame interior doors. Agree that it is almost impossible to present a room in one of the above styles without the presence of cold luster of metal surfaces. Therefore, do not immediately discard this option. Stainless steel or aluminum is the most commonly used material. The undoubted advantages of these materials are high strength and resistance to moisture. In addition, the metal does not support the process of burning and scratching the stainless steel is very difficult. But aluminum is a softer material, you need to be more careful with it. By the way, such frames are very easy to make on your own.



Ceramic Frames

This option has little popularity due to limited use. With their help, doorways in rooms are made, the walls of which are fully or partially lined with artificial stone. Ceramic frames are called elements, made of ceramic tiles, which is mounted on a special adhesive composition. This option would be appropriate for the design of the doors to the bathroom from the inside. With the manufacture of such platbands you just do it yourself. You only need to carefully cut the tile into fragments of the required size and process the edges with emery paper. If you show a little imagination, you can create an interesting composition of several types of tiles, which is present in the interior of the room. Also, artificial stone can be used as a material for such platbands. Framed in such an interesting way, the doorway will harmoniously complement the decor.



3. Types of platbands according to the method of attachment and arrangement of the internal cavity of the

With the materials of manufacture and the possible shapes of the surface, we figured out, now with regard to the method of attaching the door trim. They are:

• External - which are mounted directly on the outer part of the door frame, closing a small section of the wall. These elements are independent and are attached using liquid nails or special nails without caps. After clogging, they become invisible.
• Internal or telescopic - this option is more complex, since it is a lockable element that is attached from the inside to the door frame or to the additional panels. Such a casing has the shape of the letter “G” along its entire length. One of its edges during installation must enter the groove on the door frame. Due to this method of fastening, it is possible to adjust the width of the door frame to the wall thickness without using additional strips. The possibility of adjustment lies within 10-15 mm. The edge of the casing, which is included in the groove, makes it easy to push it to the missing size. No glue is applied to it. Only the free edge to the wall is attached. Due to this, their front side is completely smooth and not damaged. The installation process is very simple and quick. The minus of the telescopic platbands is their cost, which is several times higher than the usual overhead models. And to ensure an aesthetic appearance can only be done by performing a very precise cutting of such elements at the junction of two vertical bars with a horizontal one. According to form they can be smooth, radius or figured. As material made using wood or polyurethane.

According to the device, the internal cavity of the door trims can be:

• Hollow or with cable channels - a very functional version that allows you to hide not only the nuances associated with the installation of the door frame, but also various wires. The cable neatly fits into the special grooves along the entire length of the casing and together it fastens to the wall. This option is useful if you are 100% sure of the reliability of your wiring.
• Monolithic or simple - in this case, everything is clear, you get a solid bar from the selected material.


4. What to look for when choosing?

If you abandoned the door frames offered in the kit for the selected door leaf, then you are looking for something more interesting. What is it worth take into account:

• Cushion material is preferable to choose a material similar to the door leaf. Imagine how absurd plastic moldings look like in combination with a door made of natural wood. .. The only exceptions are ceramic and metal products that are designed to give an extraordinary accent.
• The size of the casing should be chosen depending on the size of the gap between the wall and the door frame immediately after installation. The crown should completely cover all the flaws, but at the same time it should look harmonious. If the gap is too large, it is better to carefully reduce it with the help of starting putty, rather than buying a bar of greater width. Especially when it comes to openings of small width. In the ideal case, the width of the casing corresponds to the height of the floor plinth. Adhering to this rule, you can achieve the most complete perception of the whole room.
• The casing is selected according to the forms prevailing on the door leaf or on furniture. For example, your door looks very strict and concise, it has horizontal and vertical components that imitate a prefabricated structure. That is, straight lines prevail. So, it will be more successful to complement the doorway with an even casing with a smooth surface or with vertical milling. Still it is worth paying attention to accessories. Sometimes to mitigate such severity deliberately set the door handles with rounded, streamlined shapes. If you want to achieve just such a contrast, support the idea by choosing radius trim. In general, this is a matter of taste and personal preferences. The main thing is that in conjunction with the door trim look appropriate and harmonious.
• The choice of color depends on the desired end result. Most often trim are chosen exactly in tone with the rest of the elements. But there is a more interesting design option - when the platbands choose a distinctive color. Their shade may differ by only one or two tones, and may have a completely contrasting color. In this case, the choice will affect the color of the floor plinth, walls or furniture. This method is resorted to when they want to once again emphasize the interesting design of interior doors and shade them.
• The mounting type of also needs to be considered. After all, metal, plastic, wooden or MDF platbands can be glued with special glue. And you can also use furniture studs in the case of the same wooden and MDF elements. Or maybe you liked the lath with lock connection. Pay attention to the method of connecting parts together - at a right angle or at an angle of 45 degrees. Some manufacturers recommend the best way to trim, depending on the model chosen.
• The external surface view of the is selected solely from personal preferences and room style features. For example, if you have decorative columns in the room, and you tried to bring a touch of ancient Roman times into the interior, then you can’t do without platbands that have a capital. This main rule - compliance with the interior space.

Consider buying door liners responsibly, do not neglect the recommendations of specialists in the store and take into account the features of your room. Then your choice will be a good and advantageous complement the appearance of the doorway.



5. How to carefully trim and fasten the trim

When the ideal trim is chosen, it is time to fix them on the door frame. To do this, you need to trim the slats depending on the preferred method of fastening them. The is the simplest is the option, when a short horizontal bar above the door is mounted between two vertical doors on the sides. In no case do not make the upper casing cover the ends of the side elements. With such a mount, its side parts will be striking, which, when cut, will have a distinctive color. In the case of light elements, perhaps it will be imperceptible, but dark colors instantly emphasize this drawback. The second is the popular mounting method - when the side and top bars meet at a 45 degree angle. Such cutting is quite difficult to do on your own, but with proper preparation, nothing is impossible:

• Any work always starts with markup. This applies to both cases. Start with side slats. Measure the distance from the floor to the top edge of the doorframe and add to the result the width of the trim. The very is an important aspect of the - not always the length at the point at the door itself will coincide with the point at a distance equal to the width of the jamb. If you suspect that the floors are skewed, it is better to measure in these two points and make an oblique incision. Now for the top bar. If you mount it between the side platbands, then you just need to measure the distance from the edge to the edge of the door frame. If the design with oblique joints is more suitable for you in design, then two platband widths should be added to the length of the door frame.
• Now you need to carefully to cut the strips into pieces of the desired length. Installers of interior doors do it with the help of special equipment. You can do with an electric jigsaw or a hacksaw with small teeth. In the case of cutting platbands from MDF , the size of the teeth is very important, since a large handsaw can tear the edges, and the cut will come out inaccurate. Some advise you to glue masking tape along the cut line or to make a deep line with a sharp stationery knife. Using one of these tips, you can cut more carefully.
• With normal horizontal cutting, you should have no difficulty. But to perform beveling under 45 degrees is sometimes problematic from the first time. So that everything goes well, we will give you some small tips. You can fit the top and side bars together. To do this, fold them back to each other, wrap in several places with masking tape to avoid shifts during work. On the front side of one of the platbands, you must draw a cutting line. In order not to cut off the excess and not to get a short upper bar at the end, you must first draw a square. From the upper left corner down you need to measure a distance equal to the width of the casing and put a dot at the appropriate level in the lower right corner. Combining the top of the left corner with the resulting point, you get the most correct diagonal. If, due to the increased hardness of the material, it is too difficult to cut the two parts together, perform the same marking separately on each plank. In any case, do not despair if the ends come out a little crooked. Furniture wax or sealant will help to correct the situation. You can start cutting with a horizontal bar. To do this, you first need to saw off a segment equal to the width of the door frame plus two width of the jamb. Then attach it to the wall above the opening and align horizontally using the building level. Now you need to make two marks that will correspond to the top of the right and left upper corner of the box. After that, connect the edges of the platband with the dots with a line and saw off along it. To make the markings on the side platbands, it is enough to attach the obtained segment to their back side and duplicate the bevel produced on it.

When the cutting of all parts is completed, it is necessary for to proceed with to mounting the trim. If you decide to use liquid nails for this purpose, make sure that the surface of the wall and casing is dry and does not contain residues of chips, dust and other contaminants. When applying glue, do not reach to the very edges of the planks by approximately 1 cm. Thus, you will save the walls and surface of the casing from getting into the glue, which will necessarily disperse a little while pressing. Leaning the casing to the wall, be sure to check its location with a level or plumb. Until the glue is set, you can adjust the deviations. It is better to start installation from the upper casing.

If for some reason the side platbands do not become clearly along the line, they can always be sawn down to the required amount. It is much easier than raising the top bar, thereby increasing the gap between it and the door frame. If it is about 1-2 millimeters, it will be unnoticeable, and if you missed by 5 mm, the casing will not be able to hide the mounting clearances. If you decide to use finishing nails, to facilitate the work, we advise you to do pre-drill in the places of their mounting with a drill no more than 1.5 mm. This will help to hammer the nails without the cap, without putting much effort and avoid misses, which can affect the frames in the form of dents or damage to the coating. If you are installing light trim, use light furniture wax to mask the studs. There is no need to carry out fastenings with a step of 10-15 cm. For reliable fastening of the casing approximately 2 meters long, 5 assembly points are quite enough. After completing the work, hide all the flaws in the joints of the platbands, painting them with wax, or filling them with sealant.

Tags: Interior doors