Contents of the article:
video Living in a private house, for obvious reasons, everyone wants to protect their site from outsiders, butand install on it a convenient gate with a wicket. When choosing a suitable option, you should pay attention to the gate of corrugated flooring with a wicket, whose popularity in Russia is due to the budget cost, as well as aesthetic beauty. The secret of the demand for corrugated flooring is that this material is perfectly suited for the gate. After all, it has such qualities as durability, relatively low weight and versatility of use.
A wide choice of door sizes and colors from
corrugated flooring. One of the advantages of such doors is that they can be made to individual sizes, depending on the required span width, as well as the customer's wishes. Quite a few people make such constructions on their own, because if one has elementary plumbing skills, is able to weld metal, then with the right approach, it is well within the reach of many. A wide range of colors allows you to choose the shade that will best blend in with the fence, the house and the courtyard buildings.
In order to make metal swinging doors with corrugated wicket doors strong and durable, it is important to consider the following:
- At the first stage, it is necessary to make a draft design, in which it is important to determine the dimensions of the structure, the type of material used and its quantity, calculate the weight load, as well as the necessary fittings(loops, handles, locks)
- Materials must be of high quality, and this applies not only to corrugated board, which must be purchased from a trusted manufacturer, but also frombathroom pipes of rectangular or square section, from which the frame will be cooked. The same applies to fittings, which should be resistant to wear, as well as the necessary additional elements: self-tapping screws, riveted "caps", deadbolts, stoppers-clamps and other
- . One of the most difficult stages of work is the alignment of individual sections of the profile to obtain the correct rectangle.that is not easy to do because of its large size, therefore, the
- locksmith is used here. The doorway can be located not only on one side, but also closer to the middle, which depends solely on the needCustomer's
- Considering the high load that the support pillars will have, particular attention should be paid to their respective cross-section, as well as competent concreting.
it’s quite real with your own hands, but it will take time and effort.
In the manufacture of the frame and sashes, welding of blanks is best done on a flat surface with minimal height differences, for which you can lay a sheet of iron or tin on the ground.
If a person doubts his capabilities, you can contact a specialized company that provides relevant services. Trusting the design, construction and installation of experienced professionals, the customer receives confidence that in a short time will be made the gate with a wicket, which will last for many years. At the same time, the doors of corrugated flooring with a wicket inside, the drawing of which is submitted to the customer for approval, must be made of certified materials.
Variants of corrugated doors with a wicket door
There are many types of such structures, due to the size and configuration, but in general there are 3 most popular types:
- Attached construction, where a third one is added to the two existing pillars, on which the frame gate is hung. This is the most simple gate option.
- Gate built into the gate. This is a sophisticated version that requires careful calculations, but it wins because it saves space, which is especially important if it is lacking.
- Sliding from a professional flooring. This option is less common and make it more difficult.
As a facing material, not all types of corrugated board are used, but only the “H”, “C” and “HC” brands of the wall type, the thickness of the metal of which is not less than 0.5 mm. When choosing a suitable door made of corrugated flooring with a wicket, it is important to check that the professional flooring has a high-quality polymer coating and is also made of galvanized metal. This will avoid the destructive process of corrosion and maximize the operational life of the structure. As an additional decoration, the bearing pillars can be overlaid with a red brick masonry.
Numerous photos of corrugated doors with a wicket presented on the Internet help the owners to quickly determine which option suits them best. Especially attractive is the gate with additional decoration of wrought iron elements, so you can give the design a unique and "wealth".
If the construction is made not from a new metal, but from a used pipe, it should definitely be treated with a rust converter, after which it should be primed and painted.
When planning to make an order for the manufacture of doors from corrugated flooring with a wicket, it is better to contact a firm that can also deliver and install the turnkey structure. This is very convenient because it saves a person from the need to separately look for a team of professional installers. In order to have confidence that the gate will be made qualitatively, it is best to sign a written contract with the company, which will reflect the rights and obligations of the parties.
