What to do to stop the washing machine from jumping
Buying a washing machine is an excellent opportunity to optimize the washing process and significantly increase the spare time for the owners of the apartment. But after a few months of operation, the question often arises - how to eliminate the vibration of the washing machine? Why, for no apparent reason, does the washing machine have a strong unhealthy vibration, and it jumps and jumps around the room like a hunted beast? Someone may think that this is a minor problem that is not worth attention, someone just resigned to this state of affairs. But if you do nothing, it only aggravates the situation - in fact, the problem is much more than it seems.
When a washing machine jumps, this is just a symptom signaling a serious malfunction with your equipment.
So why pay close attention to such malfunctions? When your washing machine jumps and jumps, and the increased vibration is audible even to neighbors, this can be a sign of a serious breakdown inside the unit. And if you do not react in time, you do not just risk flooding your neighbors - your equipment can finally fail without the possibility of repair.
Your washing machine may begin to vibrate under various circumstances - during spinning, during start-up and etc. For each of these cases, there is a separate action scheme, which will be discussed in detail in this review. And if you do everything in a coordinated manner and in accordance with the instructions, you will be able to deal with this trouble yourself. So, why does the washing machine jump, jump and vibrate, and what to do about it?
To begin with, it is worth considering serious malfunctions that require immediate repair and intervention by specialists.
- 1Problems with springs
- 2Worn shock absorbers
- 3Counterweight problems
- 5Problems of a different nature
Problems with springs
When a washing machine jumps, pay attention to the special springs holding the main tank - especially if the vibration began to appear a few months after the purchase. If you have purchased a Chinese-made equipment from a dubious company, it is always worth waiting for unpleasant surprises. Such springs are far from eternal and wear out over time, as well as shock absorbers. When the springs have lost their former elasticity, it remains only to replace them. And if you are confident in your skills, and the kit of spare parts is always at hand, you can do everything with your own hands.
Worn shock absorbers
If your washing machine jumps and vibrates, it can be a disturbing call signaling problems with shock absorbers and dampers. And if these important details are out of order, they must be replaced immediately, otherwise your equipment will not last long. Experts advise to change both the shock absorber immediately, even if the second one is still in a satisfactory condition. Having saved on one shock absorber, you will only gain a little time - soon you will need repair again.
The fact is that the tank hangs on the shock absorbers during operation, which softens its operation and eliminates noise. Even the most high-quality details can not cope with the load for many years, and with time they weaken. And when the shock absorbers become faulty - wait for trouble.
The counterweight is designed to dampen the vibration of the washing machine during its operation (especially when spinning). Counterweight is a concrete or plastic block, screwed to the body. Why, then, such a seemingly simple detail can break down, and what to do about it?
Breakdowns can be of different types - the block itself may be damaged, and maybe it's all about loose attachments. If the counterweight has become unusable during operation, it remains only to replace it. If he's okay, and the problem is in the weakened fixation, you just need to twist a couple of screws - and it's done.
Problems with bearings can be called the greatest trouble that can lie in wait for you in this situation. If your washing machine jumps when spinning, it's time to check the bearings. During operation (during water supply and during spinning), moisture may enter on them. They start to rust, and after a while your technique starts to make frightening rumbling sounds. And if such a breakdown has already occurred, the machine can not be used until the moment you repair it.
Replace the bearings yourself you will not be able to - contact the service center, and forget about your problems forever. Experts always have a full set of necessary details, and in the shortest terms solve all problems.
Problems of a different nature
But if all the details are in order, and the symptoms are left, what remains to be done in this situation? Why does the washing machine still vibrate and rumble all over the apartment? Quite possibly, it's about such small things as wrong installation. The technique should stand on a flat, rigid surface, preferably on a rubber mat. Make sure that no damage has occurred to the apartment when transporting the device from the shopping center, then pay attention to the transport bolts. They fix the tank during transportation, and if they are not removed, the tank will not hang on the shock absorbers. The consequence is vibration during washing and spinning..
An important factor for proper washing is the competent and even loading of things. If the drum is spinning a hard wet clod, do not be surprised that your car started jumping all over the room. You need to remove the laundry, distribute it correctly and continue washing..
If you follow the instructions and adhere to the rules of operation, your technology is not threatened. The old saying goes - how do you feel about the technique, and it treats you. Follow the advice of specialists, and success is guaranteed to you.
We advise you to read: why the washing machine does not wring.