South Korean technology LG is popular and is characterized by new developments, modern management. Therefore, the errors of the LG refrigerator, you can immediately see on the board. Each characters on what damage, how to find and eliminate, read in our article.
Error codes of the ElDzhi refrigerator
The control board is equipped with a self-diagnostic system. It is she who displays the fault code on the display. Sometimes it can be a system failure, which can be excluded by rebooting:
- Disconnect the refrigerator from the network.
- Connect in 10-15 minutes.
If during this time the code disappeared from the screen, then the problem has been solved. If it flashed again - there was a breakdown. To determine exactly which node broke, look at the instructions or in our table:
| Error code | What | means How to fix the problem with your hands |
| FS | The temperature sensor does not work in the freezer compartment. | A short circuit is likely to occur. Check the contacts and sensor wiring. Replace the defective part. To prevent such problems, it is recommended to install voltage regulator . |
| rS | Closed refrigerator compartment sensor. | Sensor cannot be repaired. The item is being diagnosed and replaced. |
| dS | Freezer compartment sensor 2 does not give a signal. | There is no connection with the sensor and control board. Examine contacts and connections. Replacement in progress. |
| dH | The evaporator sensor has failed. | The temperature in the compartment is elevated. Need to check the sensor and install a new part. |
| FF | The freezer fan is not functioning. | A fan disperses cold air through the chamber in the Nou Frost system. If it is idle, then the temperature will start to rise. The blades are checked for the presence of icing, defrosting is carried out. Diagnostics of the motor is carried out, it is replaced with a working one. |
| CF | The cooling chamber fan broke. | You need to check, find out the cause of the failure and install serviceable elements. |
| CO | The wiring between the control board and the information display is faulty. | There may be a malfunction in the display. Inspection of the wiring at the time of burning and insulation failure. Replacement plume. |
| dP | The damper motor does not work. | Inspection is needed, finding out the cause of the problem and eliminating it. Probably the motor is not functioning. Then it is replaced. |
| Er | Evaporator in the freezer compartment does not work. | One of the parts of the evaporator has failed: sensor, timer, heater. Diagnostics, ringing of parts and assemblies. Replaced defective item. |
Such codes can be seen in any model, but most often in the LG GR-389SQF, LG R-S392QVC, LG GR-P227ZCAW, LG GA-B489 ZVCK.
Certain indicators may also flash and light up. As soon as you notice these symbols on the display, do not delay the inspection, call the wizard, or spend it on your own.
