When there is a need to clean the washing machine, you are looking for effective ways.
Most people know that soda has a good ability to remove pollution from various surfaces. In the household, it is used not only for cooking, but also for various household purposes.
In addition to food, to remove dirt is used calcined. Also popular is soda for washing in a washing machine.
Next, we will examine the question of how to clean the washing machine with soda, and tell you a lot of useful information that you will need more than once.
How does soda ash differ from foodstuff
?It is considered the strongest in chemical composition. It is practically not used for domestic purposes, it is in demand in the chemical industry.
Consider the question of how to clean a washing machine with soda and how to use it in washing.
Yes! Even for clothes, it is an effective tool.
Use as a deodorant for laundry
Washing with soda in a washing machine is a great way to remove old stains from clothes and get rid of unpleasant odors. It is enough to soak the thing overnight in soda solution.
What is washing soda? This tool, which is often used to clean the washing machine, descaling the heating element, getting rid of things from stains.
There is one effective method used for washing kitchen towels:
- Mix a pinch of calcined salt with rubbed soap.
- Place in an enamel container and fill it with water by half. Wait until complete dissolution.
- Towels put into water and simmer for 20 minutes over low heat.
- Wash towels in a washer by adding powder.
Soda in an automatic washing machine is an excellent means by which you can keep your house clean, remove contamination from clothes, rid things of unpleasant odors, clean CM.
Cleaning the washer
First, consider the method of cleaning the washing machine with citric acid and soda.
You will need 150 g of lemon powder and 10 g of soda ash. Mixed ingredients need to be added to the powder compartment. After that, you should set the mode of washing with a high temperature and run the washer.
Important! This mixture helps to effectively and effectively eliminate the ingrained limescale from the mixers! The same principle removes plaque from the parts of the CMA.
When asked if the washing machine can be cleaned with soda, the answer is yes. It can be used to clean the drum and other parts.
For example, a tray is most susceptible to the accumulation of a large amount of soap and lime. Cleaning the tray is very simple: apply a small amount on the tray and rinse with water after a while.
Plaque and scale can cause serious damage to the washer. If you do not take care of the washing machine, then after a while you will feel the unpleasant smell from the drum. It is recommended to use soda to properly clean the washer. Unlike specialized means, it has low cost and has an effective effect.
To remove mold, plaque, and fungal growths, go through five steps:
- Mix 50 g of soda and 50 ml of water.
- Apply the mixture to the drum and the rubber seal, since it is under it that the mold forms.
Wear rubber gloves, as alkali leads to dry hands and irritation.
- Wait half an hour for the solution to take effect.
- Take a rag, and wipe the contaminated areas in the drum.
- Turn on the empty machine by selecting the fastest washing program.
Soda is a versatile tool that allows not only to manage the household, but also to wash things, clean the kitchen surface, remove unpleasant odors.
Of course, the answer to the question of whether it is possible to add soda to the washing machine is possible! If you use this method of cleaning at least once a couple of months, your washing machine will serve you for a long time and will please you with its efficiency.
